SigmaDSP Stereo, Low Power, 96 kHz, 24-Bit Audio Codec with Integrated PLL Features: SigmaDSP 28-/56-bit 50 MIPS digital audio processor Fully programmable with SigmaStudio graphical tool 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates from 8 kHz to 96 kHz Low power: 7 mW record, 7 mW playback, 48 kHz at 1.8 V 6 analog input pins, configurable for single-ended or differential inputs Flexible analog input/output mixers Stereo digital microphone input PLL supporting input clocks from 8 MHz to 27 MHz Analog outputs: 2 differential stereo, 2 single-ended stereo, 1 mono headphone output driver Analog automatic level control (ALC) Microphone bias reference voltage Analog and digital I/O: 1.8 V to 3.65 V I2C and SPI control interfaces Digital audio serial data I/O: stereo and time-division multiplexing (TDM) modes Software-controllable clickless mute Software power-down GPIO pins for digital controls and outputs 32-lead, 5 mm × 5 mm LFCSP −40°C to +85°C operating temperature range

Low Noise, Micropower 5.0 V Precision Voltage Reference Features: 6.0 V to 15 V supply range Supply current: 15 μA maximum Low noise: 15 μV p-p typical (0.1 Hz to 10 Hz) High output current: 5 mA Pin-compatible with the REF02/REF19xADR293-EP supports defense and aerospace applications (AQEC standard) Download ADR293-EP Data Sheet (pdf) See datasheet for additional features

Dual Port, Xpressview, 225 MHz HDMI Receiver Features: High-Definition Multimedia Interface (HDMI) 1.4a features supported All mandatory and additional 3D video formats supported Extended colorimetry, including sYCC601, Adobe RGB, Adobe YCC 601, xvYCC extended gamut color HDMI receiver 225 MHz maximum TMDS clock frequency Audio support including high bit rate (HBR) and direct stream digital (DSD) Xpressview fast switching of HDMI ports S/PDIF (IEC 60958-compatible) digital audio support Supports up to four I2S outputs Interrupt controller with two interrupt outputs Standard Identification (STDI) circuit High-bandwidth Digital Content Protection (HDCP) - 1.4 support with internal HDCP keys HDCP repeater support - Up to 127 KSVs supported See data sheet for additional features

ADG8504 - 4-Channel, Muxed Input Line Inversion LCD Gamma Buffers

16 V Auto-Zero, Rail-to-Rail Output Operational Amplifier Features: Low offset voltage: 9 μV maximum Offset drift: 0.04 μV/°C maximum Rail-to-rail output swing 5 V to 16 V single-supply or ±2.5 V to ±8 V dual-supply operation High gain: 136 dB typical High CMRR: 133 dB typical High PSRR: 143 dB typical Very low input bias current: 40 pA maximum Low supply current: 1.3 mA maximum

15 V/+12 V/5 V, Single 8 to 1 Multiplexer, Serially Controlled Matrix Switch Features: Serial interface up to 50 MHz SDO daisy-chaining option 9.5 Ω on resistance at 25°C 1.6 Ω on-resistance flatness Fully specified at ±15 V/+12 V/±5 V 3 V logic-compatible inputs Rail-to-rail operation 20-lead TSSOP and 20-lead, 4 mm × 4 mm LFCSP

High Performance, Narrow-Band Transceiver IC Features: High performance, low power, narrow-band transceiver Enhanced performance ADF7021-N with external VCO Frequency bands using external VCO: 80 MHz to 960 MHz Improved adjacent channel power (ACP) and adjacent channel rejection (ACR) compared with the ADF7021-N Programmable IF filter bandwidths: 9 kHz, 13.5 kHz, and 18.5 kHz Modulation schemes: 2FSK, 3FSK, 4FSK, MSK Spectral shaping: Gaussian and raised cosine filtering Data rates: 0.05 kbps to 24 kbps Power supply: 2.3 V to 3.6 V See data sheet for additional Features

High Performance, Digital Output Gyroscope

24-Bit, 8.5 mW, 109 dB, 128 kSPS/64 kSPS/32 kSPS ADCs Features: Download AD7766-2-KGD Data Sheet. Available as Known Good Die and fully guaranteed in data sheet specifications Oversampled successive approximation (SAR) architecture High performance ac and dc accuracy, low power 115.5 dB dynamic range, 32 kSPS (AD7766-2) 112.5 dB dynamic range, 64 kSPS (AD7766-1) 109.5 dB dynamic range, 128 kSPS (AD7766) −112 dB THD Exceptionally low power 8.5 mW, 32 kSPS (AD7766-2) 10.5 mW, 64 kSPS (AD7766-1) 15 mW, 128 kSPS (AD7766) High dc accuracy 24 bits, no missing codes (NMC) INL: ±6 ppm (typical), ±15 ppm (maximum) Low temperature drift Zero error drift: 15 nV/°C Gain error drift: 0.4 ppm/°C See data sheet for additional features

LC2MOS 16-Bit Voltage Output DAC Features: 16-bit monotonicity over temperature ±2 LSBs integral linearity error Microprocessor compatible with readback capability Unipolar or bipolar output Multiplying capability Low power (100 mW typical)