The LT6202/LT6203/LT6204 are single/dual/quad low noise, rail-to-rail input and output unity gain stable op amps that feature 1.9nV/?Hz noise voltage and draw only 2.5mA of supply current per amplifier. These amplifiers combine very low noise and supply current with a 100MHz gain bandwidth product, a 25V/?s slew rate, and are optimized for low supply signal conditioning systems.These amplifiers maintain their performance for supplies from 2.5V to 12.6V and are specified at 3V, 5V and ?5V supplies. Harmonic distortion is less than ? 80dBc at 1MHz making these amplifiers suitable in low power data acquisition systems.The LT6202 is available in the 5-pin TSOT-23 and the 8-pin SO, while the LT6203 comes in 8-pin SO and MSOP packages with standard op amp pinouts. For compact layouts the LT6203 is also available in a tiny fine line leadless package (DFN), while the quad LT6204 is available in the 16-pin SSOP and 14-pin SO packages. These devices can be used as plug-in replacements for many op amps to improve input/output range and noise performance.Applications Low Noise, Low Power Signal Processing Active Filters Rail-to-Rail Buffer Amplifiers Driving A/D Converters DSL Receivers Battery Powered/Battery Backed Equipment

DC606A: Demo Board for the LTC4056-4.2 Linear Li-Ion Charger with Termination in ThinSOT.

Demonstration Circuit 616 is a synchronous, 4-phase boost converter using the LTC3425. It is capable of operating below 1V input. DC616A is set for 3.3V output. DC616B is set for 5V output. On each demo board, the left circuit gives higher efficiency and current rating; while the right circuit has smaller size and lower cost. The switching frequency is set at 1MHz per phase, minimizing inductor and capacitor size. A single resistor at RT pin sets the frequency. If desired, the LTC3425 can be synchronized to an external clock.

The LT3781 controller simplifies the design of high power synchronous dual transistor forward DC/DC converters. The part employs fixed frequency current mode control and supports both isolated and nonisolated topologies. The IC drives external N-channel power MOSFETs and operates with input voltages up to 72V.The LT3781 is ideal for output derived power schemes, through the use of a large undervoltage lockout hysteresis range. The part is also equipped with an 18V VCC shunt regulator, which prevents exceeding absolute maximum ratings while in trickle start applications.The LT3781?s operating frequency is programmable and can be synchronized up to 350kHz. Switch phase is also controlled during synchronized operation to accommodate multiple-converter systems. Internal logic guarantees 50% maximum duty cycle operation to prevent transformer saturation.The LT3781 is available in a 20-lead SSOP package.Applications Isolated Telecommunication Systems Personal Computers and Peripherals Distributed Power Step-Down Converters Lead Acid Battery Backup Systems Automotive and Heavy Equipment

DC626A-A: Demo Board for the LTC1569-6 Linear Phase, DC Accurate, Low Power, 10th Order Low Pass Filter.

The LTC5100 is a 3.2Gbps VCSEL driver offering an unprecedented level of integration and high speed performance. The part incorporates a full range of features to ensure consistently outstanding eye diagrams. The data inputs are AC coupled, eliminating the need for external capacitors. The LTC5100 has a precisely controlled 50? output that is DC coupled to the laser, allowing arbitrary placement of the IC. No coupling capacitors, ferrite beads or external transistors are needed, simplifying layout, reducing board area and the risk of signal corruption. The unique output stage of the LTC5100 confines the modulation current to the ground system, isolating the high speed signal from the power supply to minimize RFI.The LTC5100 supports fully automated production with its extensive monitoring and control features. Integrated 10-bit DACs eliminate the need for external potentiometers. An onboard 10-bit ADC provides the laser current and voltage, as well as monitor diode current and temperature. Status information is available from the I2C serial interface for feedback and statistical process control.An internal digital controller compensates laser temperature drift and provides extensive laser safety features.Applications Gigabit Ethernet and Fibre Channel Transceivers SFF and SFP Transceiver Modules Proprietary Fiber Optic Links

The LTC3408 is a high efficiency monolithic synchronous buck regulator optimized for WCDMA power amplifier applications. The output voltage can be dynamically programmed from 0.3V to 3.5V. At VOUT > 3.6V an internal 0.08? bypass P-channel MOSFET connects VOUT directly to VIN, eliminating power loss through the inductor.The input voltage range is 2.5V to 5V making the LTC3408 ideally suited for single Li-Ion battery-powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems.Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors. The internal synchronous switch increases efficiency and eliminates the need for an external Schottky diode.The LTC3408 is available in a low profile (0.75mm) 8-lead 3mm ? 3mm DFN package.Applications WCDMA Cell Phone Power Amplifiers Wireless Modems

DC646A: Demo Board for the LT3420 Photoflash Capacitor Chargers with Automatic Refresh.

DC661A-A: Demo Board for the LT3468 Photoflash Capacitor Chargers in ThinSOT.

DC672A: Demo Board for the LTC4058-4.2 Standalone Linear Li-Ion Battery Chargers with Thermal Regulation in DFN.