Bluetooth Development Tools - 802.15.1 Module Kit

Microchip Technology

SFM3200-AW/SFM3300-AW/D/SFM3400-AW/D Flow Sensor Evaluation Kit

Microphone coupon board based on the MP23ABS1 analog MEMS

iNemo inertial module kit based on IIS3DWB

The ADAU1966 is a high performance, single-chip DAC thatprovides 16 digital-to-analog converters (DACs) with differentialoutput using the Analog Devices, Inc., patented multibitsigma-delta (?-?) architecture. An SPI/I2C port is included,allowing a microcontroller to adjust volume and many otherparameters. The ADAU1966 operates from 2.5 V digital, 5 Vanalog and 3.3 V or 5 V input/output supplies. A linear regulatoris included to generate the digital supply voltage from the analogsupply voltage. The ADAU1966 is available in an 80-lead LQFPpackage.The ADAU1966 is designed for low EMI. This consideration isapparent in both the system and circuit design architectures.By using the on-board PLL to derive the internal master clockfrom an external LRCLK, the ADAU1966 can eliminate theneed for a separate high frequency master clock and can beused with or without a bit clock. The DACs are designed usingthe latest Analog Devices continuous time architectures tofurther minimize EMI. By using 2.5 V digital supplies, powerconsumption is minimized, and the digital waveforms are asmaller amplitude, further reducing emissions. Applications Automotive audio systems Home theater systems Digital audio effects processors

The ADAU1978 incorporates four high performance, analog-to-digital converters (ADCs) with 2 V rms capable ac-coupled inputs. The ADCs use a multibit sigma-delta (?-?) architecture with continuous time front end for low EMI. An I2C/serial peripheral interface (SPI) control port is included that allows a microcontroller to adjust volume and many other parameters. The ADAU1978 uses only a single 3.3 V supply. The part internally generates the required digital DVDD supply. The low power architecture reduces the power consumption. The ADAU1978 is available in a 40-lead LFCSP package. The on-chip PLL can derive the master clock from an external clock input or frame clock (sample rate clock). When fed with the frame clock, it eliminates the need for a separate high frequency master clock in the system.Note that throughout this data sheet, multifunction pins, such as SCL/CCLK, are referred to either by the entire pin name or by a single function of the pin, for example, CCLK, when only that function is relevant. APPLICATIONS Automotive audio systems Active noise cancellation system

The ADAU1979 incorporates four high performance, analog-to-digital converters (ADCs) with 4.5 V rms capable ac-coupled inputs. The ADCs use a multibit sigma-delta (?-?) architecture with continuous time front end for low EMI. An I2C/serial peripheral interface (SPI) control port is included that allows a microcontroller to adjust volume and many other parameters. The ADAU1979 uses only a single 3.3 V supply. The device internally generates the required digital DVDD supply. The low power architecture reduces the power consumption. The on-chip PLL can derive the master clock from an external clock input or frame clock (sample rate clock). When fed with the frame clock, it eliminates the need for a separate high frequency master clock in the system. The ADAU1979 is available in a 40-lead LFCSP package.Note that throughout the data sheet, multifunction pins, such as SCL/CCLK, are referred to either by the entire pin name or by a single function of the pin, for example, CCLK, when only that function is relevant.APPLICATIONS Automotive audio systems Active noise cancellation systems

The ADcmXL1021-1 is a complete vibration sensing system that combines high performance vibration sensing (using a microelectromechanical systems (MEMS) accelerometer) with a variety of signal processing functions to simplify the development of smart sensor nodes in condition-based monitoring (CBM) systems. The typical ultralow noise density (26 ?g/?Hz) in the MEMS accelerometers supports excellent resolution. The wide bandwidth (dc to 10 kHz within 3 dB flatness) enables tracking of key vibration signatures on many machine platforms.The signal processing includes high speed data sampling (220 kSPS), 4096 time sample record lengths, filtering, windowing, fast Fourier transform (FFT), user configurable spectral or time statistic alarms, and error flags. The serial peripheral interface (SPI) provides access to a register structure that contains the vibration data and a wide range of user configurable functions.The ADcmXL1021-1 is available in a 23.7 mm ? 27.0 mm ? 12.4 mm aluminum package with four mounting flanges to support installation with standard machine screws. This lightweight package (13 g) provides consistent mechanical coupling to the core sensors over a broad frequency range. The electrical interface is through a 14-lead connector on a 36 mm flexible cable, which enables a wide range of location and orientation options for system mating connectors.The ADcmXL1021-1 requires only a single, 3.3 V power supply and supports an operating temperature range of ?40?C to +105?C. Multifunction pin names may be referenced by their relevant function only.Applications Vibration analysis Condition-based monitoring (CbM) systems Machine health Instrumentation and diagnostics Safety shutoff sensing

The ADCMP561/ADCMP562 are high speed comparators fabricated on Analog Devices, Inc., proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing overdrive conditions, is a particularly important characteristic of comparators. A separate programmable hysteresis pin is available on the ADCMP562.A differential input stage permits consistent propagation delay with a wide variety of signals in the common-mode range from ?2.0 Vto +3.0 V. Outputs are complementary digital signals that are fully compatible with PECL 10 K and 10 KH logic families. The outputs provide sufficient drive current to directly drive transmission lines terminated in 50 ? to VDD ? 2 V. A latch input, which is included, permits tracking, track-and-hold, or sample-and-hold modes of operation. The latch input pins contain internal pull-ups that set the latch in tracking mode when left open.The ADCMP561/ADCMP562 are specified over the industrial temperature range (?40?C to +85?C).Applications Automatic test equipment High speed instrumentation Scope and logic analyzer front ends Window comparators High speed line receivers Threshold detection Peak detection High speed triggers Patient diagnostics Disk drive read channel detection Hand-held test instruments Zero-crossing detectors Line receivers and signal restoration Clock drivers