The LT3960 is a robust high speed transceiver that extends a single-master I2C bus through harsh or noisy environments at up to 400kbps using the CAN-physical layer. One LT3960 sits near the I2C master, creating from SCL and SDA equivalent differential buses (I2CAN) on two twisted pairs. At the other end of the twisted pairs, a second LT3960 recreates the I2C bus locally for any slave I2C devices. A built-in 3.3V LDO powers both the I2C and I2CAN buses from a single input supply from 4V to 60V. Alternatively, the LT3960 can be powered directly from a 3.3V or 5V supply.The LT3960 is available in a 10-lead MSOP package.APPLICATIONSIndustrial NetworkingAutomotive NetworkingRemote Sensors

Evaluation circuit EVAL-LT8333-AZ features the LT8333 in a SEPIC configuration. It operates with a switching frequency of 2MHz and is designed to convert a 3V to 26V source to 12V output. The converter can output up to 1.25A depending on the input voltage (see Figure 3 in the demo manual, maximum output current vs VIN curve). This evaluation circuit features Spread Spectrum Frequency Modulation (SSFM) and EMI filters to provide optimum EMI performance. This PCB layout is optimized for good EMI performance and small solution size. The evaluation board contains a selectable jumper, JP1, to aid in the selection of the desired SYNC pin mode of operation. At light load, either pulse-skipping (PULSE SKIP) or low-ripple Burst Mode® operation (BURST) can be selected to improve the efficiency. The LT8333 boost/SEPIC/inverting converter IC operates over an input range of 2.8V to 40V, suitable for automotive, telecom, and industrial applications. The converter provides adjustable and synchronizable operation from 300kHz to 2MHz with SSFM option. The LT8333 packs other popular features such as soft-start, bias pin, input undervoltage lockout. The IC can exhibit a low quiescent current down to 9μA in BURST mode and 1μA in shutdown, which makes it ideal for battery-operated systems. The LT8333 is assembled in a thermally enhanced 10-lead 3mm × 3mm DFN package. The data sheet gives a complete description of the device, operation, and application information. The data sheet must be read in conjunction with the demo manual for EVAL-LT8333-AZ.

The EVAL-MICCANVASZ microphone canvas provides a platform for the development and evaluation of microphone beamforming arrays. 15 microphones, arranged as a ring of eight, a ring of six, and a single in the center, provide flexibility and symmetry suitable to many applications.

The SSM2517 is a PDM digital input Class-D power amplifierthat offers higher performance than existing DAC plus Class-Dsolutions. The SSM2517 is ideal for power sensitive applications,such as mobile phones and portable media players, where systemnoise can corrupt the small analog signal sent to the amplifier.The SSM2517 combines an audio digital-to-analog converter(DAC), a power amplifier, and a PDM digital interface on a singlechip. The integrated DAC plus analog ?-? modulator architectureenables extremely low real-world power consumption fromdigital audio sources with excellent audio performance. Usingthe SSM2517, audio can be transmitted digitally to the audioamplifier, significantly reducing the effect of noise sources such asGSM interference or other digital signals on the transmitted audio.The SSM2517 is capable of delivering 2.4 W of continuous outputpower with <1% THD + N driving a 4 ? load from a 5.0 V supply.The SSM2517 features a high efficiency, low noise modulationscheme that requires no external LC output filters. The closed-loop,three-level modulator design retains the benefits of an all-digitalamplifier, yet enables very good PSRR and audio performance. Themodulation continues to provide high efficiency even at low outputpower and has an SNR of 96 dB. Spread-spectrum pulse densitymodulation is used to provide lower EMI-radiated emissionscompared with other Class-D architectures.The SSM2517 has a four-state gain and sample frequency selectionpin that can select two different gain settings, optimized for 3.6 Vand 5 V operation. This same pin also controls the internal digitalfiltering and clocking, which can be set for 64 ? fS or 128 ? fS inputsample rates to support both 3 MHz and 6 MHz PDM clock rates.The SSM2517 has a micropower shutdown mode with a typicalshutdown current of 1 ?A for both power supplies. Shutdown isenabled automatically by gating input clock and data signals. Astandby mode can be entered by applying a designated PDM stopcondition sequence. The device also includes pop-and-click suppressioncircuitry. This suppression circuitry minimizes voltageglitches at the output when entering or leaving the low powerstate, reducing audible noises on activation and deactivation.The SSM2517 is specified over the industrial temperature rangeof ?40?C to +85?C. It has built-in thermal shutdown and outputshort-circuit protection. It is available in a 9-ball, 1.5 mm ? 1.5 mmwafer level chip scale package (WLCSP).Applications Mobile handsets

The SSM2529 is a digital input, Class-D power amplifier that combinesa digital-to-analog converter (DAC), a low power audio specificdigital signal processor, and a sigma-delta (?-?) Class-D modulator.This unique architecture enables extremely low real-world powerconsumption from digital audio sources with excellent audioperformance. The SSM2529 is ideal for power sensitive applications,such as mobile phones and portable media players, where systemnoise can the corrupt small analog signals that are sent to ananalog input audio amplifier.Using the SSM2529, audio data can be transmitted to the amplifierover a standard digital audio serial interface, thereby significantlyreducing the effect of noise sources such as GSM interference orother digital signals on the transmitted audio. The closed-loopdigital input design retains the benefits of an all-digital amplifier, yetenables very good PSRR and audio performance. The three-level,?-? Class-D modulator is designed to provide the least amount ofEMI, the lowest quiescent power dissipation, and the highestaudio efficiency without sacrificing audio quality.The audio input is provided via a serial audio interface that can beprogrammed to accept all common audio formats, including I2S,TDM, and PDM. Control of the IC is provided via an I2C controlinterface. An alternative to I2C control is standalone operationmode, which allows several settings that are adjusted by off-chipexternal resistors. The SSM2529 can accept a variety of input MCLKfrequencies and can use BCLK as the clock source in someconfigurations. An integrated PLL can also provide the devicemaster clock.The integrated DSP includes soft digital volume control circuits; ade-emphasis, high-pass filter; a seven-band programmable equalizer;and a programmable digital dynamic range compressor. In addition,the part includes a feedforward speaker temperature predictionmodule to protect the loudspeaker.The SSM2529 supports single-supply mode, where DVDD isprovided by the on-chip LDO regulator, eliminating the need for anexternal digital core supply.The digital interface is very flexible and convenient. It can offer abetter system solution for other products whose sole audio sourceis digital, such as wireless speakers, laptop PCs, portable digitaltelevisions, and navigation systems.The SSM2529 is specified over the industrial temperature range of?40?C to +85?C. It has built-in thermal shutdown and output shortcircuitprotection. It is available in a 16-ball, 1.92 mm ? 1.94 mmwafer level chip scale package (WLCSP).Applications Mobile phones Portable media players Laptop PCs Wireless speakers Portable gaming Navigation systems

The SSM2537 is a PDM digital input Class D power amplifier that offers higher performance than existing DAC plus Class D solutions. The SSM2537 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones and portable media players.The SSM2537 combines an audio digital-to-analog converter (DAC), a power amplifier, and a PDM digital interface on a single chip. The integrated DAC plus analog ?-? modulator architecture enables extremely low real-world power consumption from digital audio sources with excellent audio performance. Using the SSM2537, audio can be transmitted digitally to the audio amplifier, significantly reducing the effect of noise sources such as GSM interference or other digital signals on the transmitted audio. The SSM2537 is capable of delivering 2.5 W of continuous output power with <1% THD + N driving a 4 ? load from a 5.0 V supply.The SSM2537 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The closed-loop, three-level modulator design retains the benefits of an all-digital amplifier, yet enables very good PSRR and audio performance. The modulation continues to provide high efficiency even at low output power and has an SNR of 103 dB PDM input. Spread-spectrum pulse density modulation is used to provide lower EMI-radiated emissions compared with other Class D architectures.The SSM2537 has a four-state gain and sample frequency selection pin that can select two different gain settings, optimized for 3.6 V and 5 V operation. This same pin also controls the internal digital filtering and clocking, which can be set for 64 ? fS or 128 ? fS input sample rates to support both 3 MHz and 6 MHz PDM clock rates.The SSM2537 has a micropower shutdown mode with a typical shutdown current of 1 ?A for both power supplies. Shutdown is enabled automatically by gating input clock and data signals. A standby mode can be entered by applying a designated PDM stop condition sequence. The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output when entering or leaving the low power state, reducing audible noises on activation and deactivation.The SSM2537 is specified over the industrial temperature range of ?40?C to +85?C. It has built-in thermal shutdown and output short-circuit protection. It is available in a 9-ball, 1.3 mm ? 1.3 mm wafer level chip scale package (WLCSP).Applications Mobile handsets

The SSM3302 is a fully integrated, high efficiency, stereo Class-D audio amplifier. The application circuit requires minimal externalcomponents and operates from a single 7 V to 18 V supply. The device is capable of delivering 2 ? 10 W of continuous output power into a 4 ? load (or 2 ? 8 W into 8 ?) with 98 dB. Spread spectrum pulse density modulation (PDM) is used toprovide lower EMI radiated emissions compared with other Class-D architectures. The SSM3302 includes an optional modulation select pin (ultralow EMI emission mode) that significantly reduces the radiated emissions at the Class-D outputs, particularly above 100 MHz. The SSM3302 can pass FCC Class-B emissions testing with an unshielded 20 inch cable using common-mode choke-based filtering.The fully differential input of the SSM3302 provides excellent rejection of common-mode noise on the input. The device also includes a highly flexible gain select pin that only requires one series resistor to choose a gain between 9 dB and 24 dB, with no change to the input impedance. The benefit of this is to improve gain matching between multiple SSM3302 devices within a single application compared with using external resistors to set gain.The SSM3302 includes an integrated voltage regulator thatgenerates a 5 V rail.The SSM3302 has a micropower shutdown mode with a typical shutdown current of 10 ?A. Shutdown is enabled by applying a logic low to the SD pin. The device also includes pop-and-click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off, reducing audible noise during activation and deactivation.Other included features to simplify system level integration of the SSM3302 are input low-pass filtering to suppress out-ofband DAC noise interference to the pulse density modulator, fixed input impedance to simplify component selection across multiple platform production builds, and a thermal warning indicator pin.The SSM3302 is specified over the commercial temperaturerange (?40?C to +85?C). It has built-in thermal shutdown andoutput short-circuit protection. It is available in a halide-free,40-lead, 6 mm ? 6 mm lead frame chip scale package (LFCSP).APPLICATIONS Mobile computing Flat panel televisions Media docking stations Portable electronics Sound bars

The SSM3525 is a fully integrated, high efficiency, mono Class D audio amplifier with digital input and digitized output of output voltage, output current, and PVDD supply. The application circuit requires few external components and can operate from 4.5 V to 17 V (PVDD) and 1.8 V (IOVDD) supplies. It is capable of delivering 8.3 W of continuous output power into an 8 ? load (or 15.3 W into 4 ?) with <1% THD + N from a 12 V supply, or 30.2 W into an 4 ? load from a 17 V power supply, all with <1% THD + N. The SSM3525 features a high efficiency, low noise modulation scheme that requires no external inductor/capacitor (LC) output filters. This scheme continues to provide high efficiency even at low output power. It operates with 92% efficiency at 9W into an 8 ? load, 12V or 89% efficiency at 20 W into 4 ? from a 17 V supply, (should now match the table)and it has an signal-to-noise ratio (SNR) of 107 dB A weighted.Spread spectrum pulse density modulation provides lower electromagnetic interference (EMI) radiated emissions compared with other Class-D architectures, particularly above 100 MHz.The digital input eliminates the need of an external digital-to-analog converter (DAC). The SSM3525 has a micropower shutdown mode with a typical shut?down current of 90 nA at 12 V PVDD supply. Individual sense blocks can be powered down to save power when sense is not needed.The device also includes pop and click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off.Current sensing is accomplished using an integrated analog-to-digital converter (ADC) and internal sense resistor. The digitized voltage and current information can be returned in various serial audio formats, including I2S, time division multiplexing (TDM) and pulse density modulation (PDM).The SSM3525 includes an integrated regulator to generate the required 5 V analog supply. Alternatively, if an external 5 V rail from a dc-to-dc converter is available, it can improve system efficiency.The SSM3525 is designed to operate with an I2C control interface and specified over the temperature range ?40?C to +85?C. It has built-in thermal shutdown and output short-circuit protection. It is available in a halide free, 23-ball, 2.26 mm ? 2.38 mm wafer-level chip scale package (WLCSP).Applications Mobile computing Portable electronics

The SSM4567 is a digital input Class-D power amplifier that includes an integrated boost converter, allowing higher output power than with a normal battery supply. This means that maximum output power is constant across the battery voltage range. The SSM4567 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones, tablets, and portable media players.The SSM4567 combines an audio digital-to-analog converter (DAC), a power amplifier, and PDM or PCM (I2S/TDM) digital audio interfaces on a single chip. Using the SSM4567, audio can be transmitted digitally to the audio amplifier, significantly reducing the effect of noise sources on the transmitted audio and eliminate the need for input coupling capacitors. The SSM4567 is capable of delivering 2.5 W of continuous output power with <1% THD + N driving a 4 ? load from a 3.6 V supply.The SSM4567 can be controlled by I2C, PDM pattern control, or TDM control. It can also operate in standalone mode without a control interface.The SSM4567 includes circuitry to sense output current, output voltage, and the VBAT supply voltage. Current sensing is performed using an on-chip sense resistor that is connected between an output pin and the load. Output current and voltage are sent to an ADC. The outputs of these ADCs are available on the digital serial output port. The VBAT supply voltage can be used with an automatic gain control circuit that is fully configurable. This AGC can limit the maximum output at low battery voltages to avoid drawing too much current from the battery, thereby extending battery life.The SSM4567 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The closed-loop, five-level modulator design retains the benefits of an all digital amplifier, yet enables very good PSRR and audio performance. The modulation continues to provide high efficiency even at low output power and has an SNR of 104 dB, A-weighted. Spread spectrum pulse density modulation is used to provide lower EMI radiated emissions compared with other Class-D architectures.The SSM4567 has a micropower shutdown mode with a typical shutdown current of 0.2 ?A for the VBAT power supply. Shutdown is enabled automatically by gating input clock and data signals.The SSM4567 is specified over the industrial temperature range of ?40?C to +85?C. It has a built-in thermal shutdown and amplifier and boost output short-circuit protection. It is available in a 19-ball, 1.74 mm ? 2.1 mm wafer level chip scale package (WLCSP).Applications Mobile handsets Tablets Portable media players

The ADPD2214 is an optical sensor optimized for biomedical applications. Very low power consumption and near theoretical signal-to-noise ratio (SNR) are achieved by packaging an ultralow capacitance deep junction silicon photodiode operated in zero bias photoconductive mode with a low noise current amplifier. The ADPD2214 offers a typical 75 kHz bandwidth performance, which is well suited for use with pulsed excitation. The ADPD2214 uses very little power during operation and incorporates a power-down pin, enabling power cycling to optimize battery life in portable applications. The ADPD2214 provides shot noise limited performance, making it an excellent choice for measuring signals with the highest possible fidelity in low light conditions. This combination of low power, very high SNR, and electromagnetic interference (EMI) immunity enables low-power system solutions not possible with traditional photodiode (PD) and transimpedance amplifier (TIA) systems.Applications Heart rate, pulse oximetry monitoring (photoplethysmography) Battery-powered medical sensors Chemical analysis