The ADF4360-2 is a fully integrated integer-N synthesizerand voltage-controlled oscillator (VCO). The ADF4360-2 isdesigned for a center frequency of 2000 MHz. In addition, adivide-by-2 option is available, whereby the user gets an RFoutput of between 925 MHz and 1085 MHz.Control of all the on-chip registers is through a simple 3-wireinterface. The device operates with a power supply rangingfrom 3.0 V to 3.6 V and can be powered down when not in use.Applications Wireless handsets (DECT, GSM, PCS, DCS, WCDMA) Test equipment Wireless LANs CATV equipment

The ADF4360-4 is a fully integrated integer-N synthesizerand voltage-controlled oscillator (VCO). The ADF4360-4 isdesigned for a center frequency of 1600 MHz. In addition, adivide-by-2 option is available, whereby the user gets an RFoutput of between 725 MHz and 875 MHz.Control of all the on-chip registers is through a simple 3-wireinterface. The device operates with a power supply rangingfrom 3.0 V to 3.6 V and can be powered down when not in use.Applications Wireless handsets (DECT, GSM, PCS, DCS, WCDMA) Test equipment Wireless LANs CATV equipment

The ADV7441A is a high quality multiformat video decoder and graphics digitizer with an integrated 2:1 multiplexed HDMI? receiver.The ADV7441A contains two main processing sections. The first section is the standard definition processor (SDP), which processes all types of PAL, NTSC, and SECAM signals. The second section is the component processor (CP), which processes YPrPb and RGB component formats, including RGB graphics. The CP also processes the video signals from the HDMI receiver. The ADV7441A can keep the HDCP link between a HDMI source and the selected HDMI port active in analog mode operation. This allows for fast switching between the analog and HDMI modes.As a decoder, the ADV7441A can convert PAL, NTSC, and SECAM composite or S-Video signals into a digital ITU-R BT.656 format. It can also decode a component RGB or YPrPb video signal into a digital YCrCb or RGB pixel output stream. The ADV7441A supports the 525i, 625i, 525p, 625p, 720p, 1080i, 1080p, and 1250i component video standards, as well as many other HD and SMPTE standards. SCART and overlay functionality are enabled by the ability of the ADV7441A to process CVBS and standard definition RGB signals simultaneously. As a graphics digitizer, the ADV7441A can digitize RGB graphics signals from VGA to UXGA rates and convert them to a digital RGB or YCrCb pixel output stream.The ADV7441A incorporates a dual-input HDMI 1.3-compatible receiver that supports HDTV formats up to 1080p and display resolutions up to UXGA. The reception of encrypted video is possible with the inclusion of HDCP. The inclusion of adaptive equalization in the HDMI receiver ensures robust operation of the interface with cable lengths up to 30 meters. The HDMI receiver has advanced audio functionality, including a mute controller that prevents audible extraneous noise in the audio output.To facilitate professional applications, where HDCP processing and decryption is not required, a derivative part of the ADV7441A is available. This allows users who are not HDCP adopters to purchase the ADV7441A (see the Ordering Guide section for details).Fabricated using an advanced CMOS process, the ADV7441A is available in a space-saving, 144-lead, surface-mount, RoHS-compliant, plastic LQFP and is specified over the ?40?C to +85?C temperature range.APPLICATIONS Advanced TVs PDP HDTVs LCD TVs (HDTV ready) LCD/DLP? rear projection HDTVs CRT HDTVs LCoS? HDTVs Audio/video receivers (AVR) LCD/DLP front projectors HDTV STBs with PVR DVD recorders with progressive scan input support

The ADV7481 is an integrated video decoder and combinedHDMI?/MHL? receiver. It is targeted at connectivity enabledhead units requiring a wired, uncompressed digital audio/videolink from smartphones and other consumer electronics devicesto support streaming and integration of cloud-basedmultimedia content and applications into an automotiveinfotainment system.The ADV7481 MHL 2.1 capable receiver supports a maximumpixel clock frequency of 75 MHz, allowing resolutions up to720p/1080i at 60 Hz in 24-bit mode. The ADV7481 features alink control bus (CBUS) that handles the link layer, translationlayer, CBUS electrical discovery, and display data channel(DDC) commands. The implementation of the MHL sidebandchannel (MSC) commands by the system processor can behandled either by the I2C bus, or via a dedicated serialperipheral interface (SPI) bus. A dedicated interrupt pin(INTRQ3) is available to indicate that events related to CBUShave occurred.The ADV7481 also features an enable pin (VBUS_EN) todynamically enable or disable the output of a voltage regulator,which provides a 5 V voltage bus (VBUS) signal to the MHLsource.The ADV7481 HDMI capable receiver supports a maximumpixel clock frequency of 162 MHz, allowing HDTV formats upto 1080p, and display resolutions up to UXGA (1600 ? 1200 at60 Hz). The device integrates a consumer electronics control(CEC) controller that supports the capability discovery andcontrol (CDC) feature. The HDMI input port has dedicated 5 Vdetect and Hot Plug? assert pins.The HDMI/MHL receiver includes an adaptive transitionminimized differential signaling (TMDS) equalizer that ensuresrobust operation of the interface with long cables.The ADV7481 single receiver port is capable of accepting bothHDMI and MHL electrical signals. Automatic detectionbetween HDMI and MHL is achieved by using cable impedancedetection through the CD_SENSE pin.The ADV7481 contains a component processor (CP) thatprocesses the video signals from the HDMI/MHL receiver. Itprovides features such as contrast, brightness, and saturationadjustments, as well as free run and timing adjustment controlsfor HS/VS/DE timing.The ADV7481 analog front end (AFE) comprises a single highspeed, 10-bit analog-to-digital converter (ADC) that digitizesthe analog video signal before applying it to the SDP.The eight analog video inputs can accept single-ended, pseudodifferential, and fully differential composite video signals, aswell as S-Video and YPbPr video signals, supporting a widerange of consumer and automotive video sources.Short to battery (STB) events can be detected on differentialinput video signals. STB protection is provided by ac couplingthe input video signals. The ADV7481, in combination with anexternal resistor divider, provides a common-mode input rangeof 4 V, enabling the removal of large signal common-modetransients present on the video lines.The automatic gain control (AGC) and clamp restore circuitryallow an input video signal up to 1.0 V p-p at the analog videoinput pins of the ADV7481. Alternatively, the AGC and clamprestore circuitry can be bypassed for manual settings.The SDP of the ADV7481 is capable of decoding a largeselection of analog baseband video signals in composite,S-Video, and component formats. The SDP supports worldwideNTSC, PAL, and SECAM standards.The ADV7481 features an 8-bit digital input/output port,supporting input and output video resolutions up to 720p/1080iin both the 8-bit interleaved 4:2:2 SDR and DDR modes.APPLICATIONSPortable devicesAutomotive infotainment (head unit and rear seatentertainment systems)HDMI repeaters and video switches

The ADV7622 is a high performance, four-input, one-output, High-Definition Multimedia Interface (HDMI?) transceiver that integrates HDMI receiver and transmitter functions with digital audio I/Os onto one chip. It supports all HDCP repeater functions through fully tested Analog Devices, Inc., repeater software libraries and driversThe ADV7622 supports all mandatory 3D TV formats in addition to all HDTV formats up to 1080p 36-bit Deep Color. The ADV7622 also features an integrated CEC controller that supports capability discovery and control (CDC).The ADV7622 offers a dedicated flexible audio output port and a dedicated audio input port to allow for easy extraction and insertion of audio data into and out of the HDMI stream. All HDMI audio formats, including SACD via DSD, compressed SACD via DST, and HBR audio, are supported. The ADV7622 also features an audio return channel (ARC) receiver. ARC simplifies cabling by combining upstream audio capability in a conventional HDMI cable.Fabricated in an advanced CMOS process, the ADV7622 is provided in a 144-lead, 20 mm ? 20 mm LQFP, Pb-free package and is specified over the ?20?C to +70?C temperature range.APPLICATIONS AVR HTiB Sound bar with HDMI repeater support HBR enabled TVs Other repeater applications

The ADV7672 is a High-Definition Multimedia Interface (HDMI?) transceiver with crosspoint matrix switch, video mirror, video split, and video merge capabilities.The ADV7672 supports 40 Gbps fixed rate link (FRL) and 18 Gbps transition minimized differential signaling (TMDS) video rates and provides two independent HDMI receiver ports, two independent HDMI transmitter ports, two audio ports, and an enhanced audio return channel (eARC) interface. Each HDMI receiver and transmitter supports 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, and 4k120 4:4:4 10-bit high frame rate video. Each audio port can be independently configured as either an audio extraction or audio insertion port. The audio ports support 8-channel, 192 kHz, 24-bit pulse coded modulation (PCM) and compressed audio formats including high bitrate formats.The eARC interface can be configured as either an eARC transmitter or an eARC receiver. The eARC interface supports 8-channel 192 kHz PCM audio and high bit rate audio (HBR) compressed audio formats including Dolby TrueHD? and DTS-HD?. Audio return channel (ARC) is also supported on the eARC interface.The ADV7672 supports display stream compression (DSC) 1.2a data passthrough and high dynamic range (HDR) metadata passthrough for HDMI dynamic HDR, HDR10+, and Dolby Vision?. The ADV7672 implements the High-bandwidth Digital Content Protection (HDCP) 2.3 specification to protect the delivery of premium content. HDCP 2.3 is applied in transmitter, receiver, and repeater configurations. HDCP 2.3 is backwards compatible with HDCP 2.2. HDCP 1.4 is also supported to provide interoperability with legacy devices. The ADV7672 is configured via I2C using a high level host controller interface (API). The ADV7672 is provided in a 108-lead, lead frame chip scale package (LFCSP) with an exposed paddle and is specified over a 0?C to 70?C temperature range. Customers that wish to sample or purchase the ADV7672 must be licensed HDMI 2.1 adopters listed at HDMI.org and licensed HDCP 2.x adopters listed at Digital-CP.com. APPLICATIONS TV Home theater Industrial switching

The ADXL327 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ?2 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL327 is available in a small, low profile, 4 mm ? 4 mm ? 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ?16g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0?.Several special sensing functions are provided. Activity and inactivitysensing detect the presence or lack of motion by comparingthe acceleration on any axis with user-set thresholds. Tap sensingdetects single and double taps in any direction. Free-fall sensingdetects if the device is falling. These functions can be mappedindividually to either of two interrupt output pins. An integratedmemory management system with a 32-level first in, first out (FIFO)buffer can be used to store data to minimize host processor activityand lower overall system power consumption.Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.The ADXL345 is supplied in a small, thin, 3 mm ? 5 mm ? 1 mm, 14-lead, plastic package. ADXL345-EP Supports defense and aerospace applications (AQEC)APPLICATIONS Handsets Medical instrumentation Gaming and pointing devices Industrial instrumentation Personal navigation devices Hard disk drive (HDD) protection

The ADXL362 Development Board is an easy-to-use tool designed to shorten application development time by enabling data collection and firmware development on an existing hardware platform. To highlight the ultralow power consumption offered by the ADXL362, the board is designed as a low-power platform. Communications and processing are performed by a Renesas RL78/G13 ultralow power microcontroller, and firmware is written in C. An e-paper display shows numeric or graphical output, depending on the firmware loaded. The board is fully programmable via USB, and a development environment and header files are available from Renesas. Schematics and layout are provided so that the platform can be duplicated in the final application, having already been tested with the application firmware. The board is pre-configured as a motion-activated on/off switch. Other firmware examples available are a tilt sensor, a datalogger, and a real-time data viewer (provided with a GUI that graphs real-time acceleration data on a computer screen). The board can be powered over USB, with a CR2450 coin cell battery, or from an external supply. Supplied with the board are the e-paper display, a USB cable, and a microSD card for logging data. Other evaluation tools available for the ADXL362 are the GUI-based real-time evaluation system, EVAL-ADXL362Z-MLP, and a simple Breakout Board, refer to the EVAL-ADXL362Z

The ADXRS620 is a complete angular rate sensor (gyroscope)that uses the Analog Devices, Inc. surface-micromachiningprocess to create a functionally complete and low cost angularrate sensor integrated with all required electronics on one chip.The manufacturing technique for this device is the same highvolume BiMOS process used for high reliability automotiveairbag accelerometers.The ADXRS620 is an automotive grade gyroscope that has 100% pin, package, temperature, and function compatible to the available industrial grade ADXRS652 gyro. Automotive grade gyroscopes have more extensive guaranteed min/max specifications due to automotive testing.The output signal, RATEOUT (1B, 2A), is a voltageproportional to angular rate about the axis normal to the topsurface of the package. The output is ratiometric with respect toa provided reference supply. A single external resistor can beused to lower the scale factor. An external capacitor sets thebandwidth. Other external capacitors are required for operation.A temperature output is provided for compensation techniques.Two digital self-test inputs electromechanically excite thesensor to test proper operation of both the sensor and the signalconditioning circuits. The ADXRS620 is available in a 7 mm ?7 mm ? 3 mm BGA ceramic package.APPLICATIONS Vehicle chassis rollover sensing Inertial measurement units Platform stabilization