ABX00063

Arduino

The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due.

Let’s break down all the powerful features of this board.

Microcontroller (STM32H747XI): This dual core 32-bits microcontroller allows you have two brain talking to each other (a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz) you can even run micropython in one and Arduino in the other.

Wireless communication (Murata 1DX):  Whether you prefer Wi-Fi or Bluetooth, the GIGA R1 WiFi got you covered. You can even quickly connect to the Arduino IoT Cloud and keep track of your project remotely. And if you are concerned about the security of the communication, the ATECC608A keeps everything under control.

Hardware ports and communication: Following the legacy of the Arduino Mega and the Arduino Due, the GIGA R1 WiFi has 4 UARTs (hardware serial ports), 3 I2C ports (1 more than its predecessors), 2 SPI ports (1 more than its predecessors), 1 FDCAN.

GPIOs and extra pins: We wanted to keep the same form factor of the Mega and the Due, so you can easily adapt your custom made shields to the GIGA R1 WiFi (remember this board works at 3.3V though!) and we added extra headers to access extra pins, leaving the total count to 76 GPIO pins, and the best part, you can access them from underneath, so keep your project as it is and just think on how to expand it. Also, we added two new pins: a VRTC so you can connect a battery to keep the RTC running while the board is off and an OFF pin so you can shut down the board.

Connectors: The GIGA R1 WiFi has extra connectors on board which will facilitate the creation of your project without any extra hardware. This board has:

  • USB-A connector suitable for hosting USB sticks, other mass storage devices and HID devices such as keyboard or mouse.
  • 3.5mm input-output jack connected to DAC0, DAC1 and A7.
  • USB-C® to power and program the board, as well as simulate an HID device such as mouse or keyboard.
  • Jtag connector, 2x5 1.27mm.
  • 20 pin Arducam camera connector.

Higher voltage support: In comparison with its predecessors that support up to 12 volts, the GIGA R1 WiFi can handle a range of 6 to 24 volts.

 

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
AVNET Express ABX00063 255 1 $63.87 $62.94 $60.14 $58.74 $58.74 $58.74
element14 APAC ABX00063 102 1 $94.56 $94.56 $94.56 $94.56 $94.56 $94.56
Farnell ABX00063 150 1 $58.17 $58.17 $58.17 $58.17 $58.17 $58.17
Mouser Electronics ABX00063 560 1 $78.67 $78.67 $78.67 $78.67 $78.67 $78.67
Newark ABX00063 5 1 $73.87 $73.87 $73.87 $73.87 $73.87 $73.87

ABX00070

Arduino

Arduino Nano 33 BLE Sense Rev2 with headers

An AI (Artificial Intelligence) enabled board in the shape of the classic Nano board, with all the sensors to start building your next project right away.

The Arduino Nano 33 BLE Sense Rev2 with headers is Arduino’s 3.3V AI enabled board in the smallest available form factor with a set of sensors that will allow you without any external hardware to start programming your next project, right away.

With the Arduino Nano 33 BLE Sense Rev2, you can:

  • Build wearable devices that using AI can recognize movements.
  • Build a room temperature monitoring device that can suggest or modify changes in the thermostat.
  • Build a gesture or voice recognition device using the microphone or the gesture sensor together with the AI capabilities of the board.

The main feature of this board, besides the complete selection of sensors, is the possibility of running Edge Computing applications (AI) on it using TinyML. Learn how to use the Tensor Flow Lite library following this instructions or learn how to train your board using Edge Impulse.

Tech Specs

Microcontroller - nRF52840

Operating Voltage - 3.3V

Input Voltage - 21V

DC Current per I/O Pin - 15mA

Clock Speed - 64MHz

CPU Flash Memory - 1MB (nRF52840)

SRAM - 256KB (nRF52840)

EEPROM - none

Digital Input / Output Pins - 14

PWM Pins - All digital pins

UART - 1

SPI - 1

I2C - 1

Analog Input Pins - 8 (ADC 12 bit 200 k samples)

Analog Output Pins - Only through PWM (no DAC)

External Interrupts - All digital pins

LED_BUILTIN - 13

USB - Native in the nRF52840 Processor

IMU - BMI1270 and BMM150

Microphone - MP34DT06JTR

Gesture, light, proximity, color - APDS9960

Barometric pressure - LPS22HB

Temperature, humidity - HS3003

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1050-ABX00070-ND 183 $43.50 $43.50 $43.50 $43.50 $43.50 $43.50
AVNET Express ABX00070 0 1 $40.47 $39.88 $38.11 $37.22 $37.22 $37.22
element14 APAC ABX00070 259 1 * $42.74 * $42.74 * $42.74 * $42.74 * $42.74 * $42.74
Farnell ABX00070 286 1 * $45.08 * $45.08 * $45.08 * $45.08 * $45.08 * $45.08
Mouser Electronics 782-ABX00070 83 1 $43.29 $43.29 $43.29 $43.29 $43.29 $43.29
Newark ABX00070 4 1 $44.13 $44.13 $44.13 $44.13 $44.13 $44.13

ABX00092

Arduino

Arduino Nano ESP32

Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease.

Key Features:

  • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
  • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
  • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps. Arduino even offer an introductory course for those new to the MicroPython world.
  • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. Our setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app. (Available starting August 2023)
  • HID support: Emulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

Tech Specs:

Board Name Arduino Nano ESP32
SKU ABX00092
Microcontroller u-blox NORA-W106 (ESP32-S3)
USB connector USB-C
Pins Built-in LED Pin 13
Built-in RGB LED pins 14-16
Digital I/O Pins 14
Analog input pins 8
PWM pins 5
External interrupts All digital pins
Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3)
Bluetooth u-blox NORA-W106 (ESP32-S3)
Communication UART 2x
I2C 1x, A4 (SDA), A5 (SCL)
SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power I/O Voltage 3.3 V
Input voltage (nominal) 6-21 V
Source Current per I/O Pin 40 mA
Sink Current per I/O Pin 28 mA
Clock speed Processor up to 240 MHz
Memory ROM 384 kB
SRAM 512 kB
External Flash 128 Mbit (16 MB)
Dimensions Width 18 mm
Length 45 mm
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey 1050-ABX00092-ND 181 $20.00 $20.00 $20.00 $20.00 $20.00 $20.00
AVNET Express ABX00092 0 1 $18.60 $18.33 $17.52 $17.11 $17.11 $17.11
element14 APAC ABX00092 34 1 * $18.75 * $18.75 * $18.75 * $18.75 * $18.75 * $18.75
Farnell ABX00092 35 1 * $19.77 * $19.77 * $19.77 * $19.77 * $19.77 * $19.77
Mouser Electronics 782-ABX00092 559 1 $20.69 $20.69 $20.69 $20.69 $20.69 $20.69
Newark ABX00092 1 1 $19.35 $19.35 $19.35 $19.35 $19.35 $19.35

ABX00083

Arduino

DEVELOPMENT BOARD, 32BIT, XTENSA LX7;

Key Features:

  • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
  • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
  • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps. Arduino even offer an introductory course for those new to the MicroPython world.
  • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. Our setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app. (Available starting August 2023)
  • HID support: Emulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

Tech Specs:

Board Name Arduino® Nano ESP32 with headers
SKU ABX00083
Microcontroller u-blox® NORA-W106 (ESP32-S3)
USB connector USB-C®
Pins Built-in LED Pin 13
Built-in RGB LED pins 14-16
Digital I/O Pins 14
Analog input pins 8
PWM pins 5
External interrupts All digital pins
Connectivity Wi-Fi® u-blox® NORA-W106 (ESP32-S3)
Bluetooth® u-blox® NORA-W106 (ESP32-S3)
Communication UART 2x
I2C 1x, A4 (SDA), A5 (SCL)
SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power I/O Voltage 3.3 V
Input voltage (nominal) 6-21 V
Source Current per I/O Pin 40 mA
Sink Current per I/O Pin 28 mA
Clock speed Processor up to 240 MHz
Memory ROM 384 kB
SRAM 512 kB
External Flash 128 Mbit (16 MB)
Dimensions Width 18 mm
Length 45 mm
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey ABX00083 524 $21.00 $21.00 $21.00 $21.00 $21.00 $21.00
AVNET Express ABX00083 0 1 $19.54 $19.25 $18.40 $17.97 $17.97 $17.97
element14 APAC ABX00083 42 1 $26.16 $26.16 $26.16 $26.16 $26.16 $26.16
Farnell ABX00083 54 1 $16.09 $16.09 $16.09 $16.09 $16.09 $16.09
Mouser Electronics ABX00083 1353 1 $20.90 $20.90 $20.90 $20.90 $20.90 $20.90
Newark ABX00083 1 1 $20.43 $20.43 $20.43 $20.43 $20.43 $20.43

AVX00067

Arduino
EDUCATION JUNIOR CERTIFICATION 1 CODE

ABX00067

Arduino
Arduino Giga R1 Rohs Compliant: Yes |Arduino ABX00067
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
Mouser Electronics ABX00067 0 1
Newark ABX00067 0 1 $101.64 $94.41 $85.13 $82.03 $82.03 $82.03

ABX00072

Arduino
Bluetooth Development Tools - 802.15.1 Nano 33 BLE Rev2 built-in 9-axis Inertial Measurement Unit (IMU) Without Headers
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
AVNET Express ABX00072 0 1
Farnell ABX00072 71 1 $20.31 $20.31 $20.31 $20.31 $20.31 $20.31
Mouser Electronics ABX00072 192 1 $27.73 $27.73 $27.73 $27.73 $27.73 $27.73
Newark ABX00072 0 1 $25.59 $25.59 $25.59 $25.59 $25.59 $25.59

ABX00019

Arduino

The new standard Narrow Band IoT, with the easy to use Arduino ecosystem. Fully compatible with Narrow Band IoT NB classes and LTE CAT M1 networks.

Add Narrow Band communication to your project with the MKR NB 1500. It's the perfect choice for devices in remote locations without an Internet connection, or in situations in which power isn't available (e.g., field monitoring systems).

This board is designed for global use, providing Cat M1/NB1 deployed bands 2, 3, 4, 5, 8, 12, 13, 20, 28 (Vodafone, AT&T, T-Mobile USA, Telstra, Verizon).

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey ABX00019 325 $92.40 $92.40 $92.40 $92.40 $92.40 $92.40
Arrow North American Components ABX00019 0 10 $64.22 $104.60 $94.14 $94.14 $94.14 $94.14
AVNET Express ABX00019 0 1 $85.84 $84.59 $80.83 $78.95 $78.95 $78.95
element14 APAC ABX00019 23 1 $110.53 $110.53 $110.53 $110.53 $110.53 $110.53
Farnell ABX00019 42 1 $67.99 $67.99 $67.99 $67.99 $67.99 $67.99
Mouser Electronics ABX00019 89 1 $91.95 $91.95 $91.95 $91.95 $91.95 $91.95
Newark ABX00019 5 1 $86.34 $86.34 $86.34 $86.34 $86.34 $86.34
RS Components ABX00019 0 $74.52
RS Components (APAC) ABX00019 0 $125.18
Verical Marketplace ABX00019 10 1 $64.22 $64.22 $64.22 $64.22 $64.22 $64.22

ABX00021

Arduino

Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi and some other enhancements. It incorporates a brand new 8-bit microprocessor from Microchip and has an onboard IMU (Inertial Measurement Unit).

The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.

The Arduino Uno WiFi has 14 digital input/output pins—5 can be used as PWM outputs with Pin 11 that is not PWM as on the UNO Rev3 —6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.

Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey ABX00021 256 $53.80 $53.80 $53.80 $53.80 $53.80 $53.80
Arrow North American Components ABX00021 6 1 $53.80 $53.80 $53.80 $53.80 $53.80 $53.80
AVNET Express ABX00021 0 1 $49.96 $49.23 $47.05 $45.95 $45.95 $45.95
element14 APAC ABX00021 47 1 $64.28 $64.28 $64.28 $64.28 $64.28 $64.28
Farnell ABX00021 95 1 $34.03 $34.03 $34.03 $34.03 $34.03 $34.03
Jameco ABX00021 28 $44.85 $44.85 $44.85 $44.85 $44.85 $44.85
Mouser Electronics ABX00021 331 1 $51.77 $51.77 $51.77 $51.77 $51.77 $51.77
Newark ABX00021 5 1 $50.22 $50.22 $50.22 $50.22 $50.22 $50.22
RS Components ABX00021 0 $40.74
RS Components (APAC) ABX00021 0 $68.43
Verical Marketplace ABX00021 6 1 $53.80 $53.80 $53.80 $53.80 $53.80 $53.80

ABX00003

Arduino
Arduino Zero
Distributor SKU Stock MOQ 1 10 50 100 1,000 10,000
DigiKey ABX00003 20 $47.40 $47.40 $0.00 $0.00 $0.00 $0.00
Arrow North American Components ABX00003 0 25 $0.00 $0.00 $0.00 $0.00
AVNET Express ABX00003 0 1 $33.48 $32.99 $31.53 $30.79 $30.79 $30.79
element14 APAC ABX00003 64 1 $53.54 $53.54 $53.54 $53.54 $53.54 $53.54
Farnell ABX00003 84 1 $32.94 $32.94 $32.94 $32.94 $32.94 $32.94
Jameco ABX00003 0 $39.95 $37.95 $35.95 $35.95 $35.95 $35.95
Mouser Electronics ABX00003 50 1 $47.17 $47.17 $47.17 $47.17 $47.17 $47.17
Newark ABX00003 12 1 $41.83 $41.83 $41.83 $41.83 $41.83 $41.83