Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
DigiKey | 1660-1006-ND | 0 | 1 | $0.00 | $0.00 | $0.00 | $0.00 | $0.00 | $0.00 |
Mouser Electronics | 475-GBX00004 | 0 | 1 |
ABX00012
Arduino
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex M0+ core.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.
Features:
- Small form factor
- Number crunching capability
- Low power consumption
- Integrated battery management
- USB host
- Integrated SD management
- Programmable SPI, I2C and UART
Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
DigiKey | ABX00012 | 1170 | 1 | $30.30 | $30.30 | $30.30 | $30.30 | $30.30 | $30.30 |
Arrow North American Components | ABX00012 | 0 | 1 | $26.99 | $21.68 | $21.52 | $21.52 | $21.52 | $21.52 |
AVNET Express | ABX00012 | 0 | 1 | $38.59 | $38.59 | $38.59 | $38.59 | $38.59 | $38.59 |
element14 APAC | ABX00012 | 22 | 1 | * $28.06 | * $28.06 | * $28.06 | * $28.06 | * $28.06 | * $28.06 |
Farnell | ABX00012 | 293 | 1 | * $27.90 | * $27.90 | * $27.90 | * $27.90 | * $27.90 | * $27.90 |
Jameco | ABX00012 | 25 | $24.59 | $24.59 | $24.59 | $24.59 | $24.59 | $24.59 | |
Mouser Electronics | ABX00012 | 1063 | 1 | $30.15 | $30.15 | $30.15 | $30.15 | $30.15 | $30.15 |
Newark | ABX00012 | 9 | 1 | $28.28 | $28.28 | $28.28 | $28.28 | $28.28 | $28.28 |
RS Components | ABX00012 | 0 | $22.33 | ||||||
RS Components (APAC) | ABX00012 | 0 | $37.51 | ||||||
Verical Marketplace | ABX00012 | 1052 | 1 | $30.30 | $22.52 | $22.77 | $22.77 | $22.77 | $22.77 |
ABX00014
Arduino
Arduino MKR FOX 1200 has been designed to offer a practical and cost effective solution for makers seeking to add SigFox connectivity to their projects with minimal previous experience in networking. It is based on the Atmel SAMD21 and a ATA8520 SigFox module.
The design includes the ability to power the board using two 1.5V AA or AAA batteries or external 5V. Switching from one source to the other is done automatically. A good 32 bit computational power similar to the Zero board, the usual rich set of I/O interfaces, low power SigFox communication and the ease of use of the Arduino Software (IDE) for code development and programming. All these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form factor. The USB port can be used to supply power (5V) to the board. The Arduino MKR FOX 1200 is able to run with or without the batteries connected and has limited power consumption.
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
DigiKey | 1050-1145-ND | 0 | $41.40 | $41.40 | $41.40 | $41.40 | $41.40 | $41.40 | |
Arrow North American Components | ABX00014 | 0 | 50 | $36.99 | $48.37 | $45.87 | $45.87 | $45.87 | $45.87 |
Farnell | ABX00014 | 48 | 1 | * $33.26 | * $33.26 | * $33.26 | * $33.26 | * $33.26 | * $33.26 |
Mouser Electronics | 485-ABX00014 | 0 | 1 | ||||||
Newark | ABX00014 | 0 | $44.17 | $44.17 | $44.17 | $44.17 | $44.17 | $44.17 | |
RS Components | ABX00014 | 0 | $35.40 | ||||||
RS Components (APAC) | ABX00014 | 0 | $59.47 | ||||||
Verical Marketplace | ABX00014 | 986 | 1 | $36.99 | $59.58 | $56.97 | $56.97 | $56.97 | $56.97 |
ABX00030
Arduino
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
DigiKey | ABX00030 | 71 | 1 | $26.30 | $26.30 | $26.30 | $26.30 | $26.30 | $26.30 |
Arrow North American Components | ABX00030 | 22 | 1 | $26.30 | $26.30 | $30.62 | $30.62 | $7.62 | $7.62 |
AVNET Express | ABX00030 | 0 | 1 | $39.11 | $39.11 | $39.11 | $39.11 | $39.11 | $39.11 |
element14 APAC | ABX00030 | 221 | 1 | * $24.33 | * $24.33 | * $24.33 | * $24.33 | * $24.33 | * $24.33 |
Farnell | ABX00030 | 268 | 1 | * $24.18 | * $24.18 | * $24.18 | * $24.18 | * $24.18 | * $24.18 |
Mouser Electronics | ABX00030 | 2095 | 1 | $28.98 | $28.98 | $28.98 | $28.98 | $28.98 | $28.98 |
Newark | ABX00030 | 1 | 1 | $24.52 | $24.52 | $24.52 | $24.52 | $24.52 | $24.52 |
RS Components | ABX00030 | 0 | $20.64 | ||||||
RS Components (APAC) | ABX00030 | 0 | $34.67 | ||||||
Verical Marketplace | ABX00030 | 22 | 1 | $26.30 | $26.30 | $26.30 | $26.30 | $26.30 | $26.30 |
ABX00034
Arduino
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
DigiKey | ABX00034 | 0 | 1 | $32.88 | $32.88 | $32.88 | $32.88 | $32.88 | $32.88 |
Arrow North American Components | ABX00034 | 0 | 25 | $34.12 | $34.12 | $34.12 | $34.12 | $34.12 | $34.12 |
AVNET Express | ABX00034 | 0 | 1 | $43.65 | $43.65 | $43.65 | $43.65 | ||
element14 APAC | ABX00034 | 160 | 1 | * $27.11 | * $27.11 | * $27.11 | * $27.11 | * $27.11 | * $27.11 |
Farnell | ABX00034 | 161 | 1 | * $26.94 | * $26.94 | * $26.94 | * $26.94 | * $26.94 | * $26.94 |
Mouser Electronics | ABX00034 | 72 | 1 | $32.35 | $32.35 | $32.35 | $32.35 | $32.35 | $32.35 |
Newark | ABX00034 | 4 | 1 | $27.31 | $27.31 | $27.31 | $27.31 | $27.31 | $27.31 |
RS Components | ABX00034 | 0 | $22.80 | ||||||
RS Components (APAC) | ABX00034 | 0 | $38.30 | ||||||
Verical Marketplace | ABX00034 | 15 | 1 | $29.30 | $29.30 | $29.30 | $29.30 | $29.30 | $29.30 |
ABX00063
Arduino
The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due.
Let’s break down all the powerful features of this board.
Microcontroller (STM32H747XI): This dual core 32-bits microcontroller allows you have two brain talking to each other (a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz) you can even run micropython in one and Arduino in the other.
Wireless communication (Murata 1DX): Whether you prefer Wi-Fi or Bluetooth, the GIGA R1 WiFi got you covered. You can even quickly connect to the Arduino IoT Cloud and keep track of your project remotely. And if you are concerned about the security of the communication, the ATECC608A keeps everything under control.
Hardware ports and communication: Following the legacy of the Arduino Mega and the Arduino Due, the GIGA R1 WiFi has 4 UARTs (hardware serial ports), 3 I2C ports (1 more than its predecessors), 2 SPI ports (1 more than its predecessors), 1 FDCAN.
GPIOs and extra pins: We wanted to keep the same form factor of the Mega and the Due, so you can easily adapt your custom made shields to the GIGA R1 WiFi (remember this board works at 3.3V though!) and we added extra headers to access extra pins, leaving the total count to 76 GPIO pins, and the best part, you can access them from underneath, so keep your project as it is and just think on how to expand it. Also, we added two new pins: a VRTC so you can connect a battery to keep the RTC running while the board is off and an OFF pin so you can shut down the board.
Connectors: The GIGA R1 WiFi has extra connectors on board which will facilitate the creation of your project without any extra hardware. This board has:
- USB-A connector suitable for hosting USB sticks, other mass storage devices and HID devices such as keyboard or mouse.
- 3.5mm input-output jack connected to DAC0, DAC1 and A7.
- USB-C® to power and program the board, as well as simulate an HID device such as mouse or keyboard.
- Jtag connector, 2x5 1.27mm.
- 20 pin Arducam camera connector.
Higher voltage support: In comparison with its predecessors that support up to 12 volts, the GIGA R1 WiFi can handle a range of 6 to 24 volts.
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
AVNET Express | ABX00063 | 255 | 1 | $83.92 | $83.92 | $83.92 | $83.92 | $83.92 | $83.92 |
element14 APAC | ABX00063 | 287 | 1 | * $73.31 | * $73.31 | * $73.31 | * $73.31 | * $73.31 | * $73.31 |
Farnell | ABX00063 | 339 | 1 | * $72.86 | * $72.86 | * $72.86 | * $72.86 | * $72.86 | * $72.86 |
Mouser Electronics | ABX00063 | 28 | 1 | $94.20 | $94.20 | $94.20 | $94.20 | $94.20 | $94.20 |
Newark | ABX00063 | 10 | 1 | $73.87 | $73.87 | $73.87 | $73.87 | $73.87 | $73.87 |
ABX00070
Arduino
Arduino Nano 33 BLE Sense Rev2 with headers
The Arduino Nano 33 BLE Sense Rev2 with headers is Arduino’s 3.3V AI enabled board in the smallest available form factor with a set of sensors that will allow you without any external hardware to start programming your next project, right away.
With the Arduino Nano 33 BLE Sense Rev2, you can:
- Build wearable devices that using AI can recognize movements.
- Build a room temperature monitoring device that can suggest or modify changes in the thermostat.
- Build a gesture or voice recognition device using the microphone or the gesture sensor together with the AI capabilities of the board.
The main feature of this board, besides the complete selection of sensors, is the possibility of running Edge Computing applications (AI) on it using TinyML. Learn how to use the Tensor Flow Lite library following this instructions or learn how to train your board using Edge Impulse.
Tech Specs
Microcontroller - nRF52840
Operating Voltage - 3.3V
Input Voltage - 21V
DC Current per I/O Pin - 15mA
Clock Speed - 64MHz
CPU Flash Memory - 1MB (nRF52840)
SRAM - 256KB (nRF52840)
EEPROM - none
Digital Input / Output Pins - 14
PWM Pins - All digital pins
UART - 1
SPI - 1
I2C - 1
Analog Input Pins - 8 (ADC 12 bit 200 k samples)
Analog Output Pins - Only through PWM (no DAC)
External Interrupts - All digital pins
LED_BUILTIN - 13
USB - Native in the nRF52840 Processor
Microphone - MP34DT06JTR
Gesture, light, proximity, color - APDS9960
Barometric pressure - LPS22HB
Temperature, humidity - HS3003
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
AVNET Express | ABX00070 | 0 | 1 | $53.17 | $53.17 | $53.17 | $53.17 | $53.17 | $53.17 |
element14 APAC | ABX00070 | 397 | 1 | * $43.79 | * $43.79 | * $43.79 | * $43.79 | * $43.79 | * $43.79 |
Farnell | ABX00070 | 445 | 1 | * $43.53 | * $43.53 | * $43.53 | * $43.53 | * $43.53 | * $43.53 |
Mouser Electronics | ABX00070 | 126 | 1 | $43.29 | $43.29 | $43.29 | $43.29 | $43.29 | $43.29 |
Newark | ABX00070 | 4 | 1 | $44.13 | $44.13 | $44.13 | $44.13 | $44.13 | $44.13 |
ABX00092
Arduino
Arduino Nano ESP32
Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease.
Key Features:
- Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
- Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
- Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps. Arduino even offer an introductory course for those new to the MicroPython world.
- Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. Our setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app. (Available starting August 2023)
- HID support: Emulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.
Tech Specs:
Board | Name | Arduino Nano ESP32 |
SKU | ABX00092 | |
Microcontroller | u-blox NORA-W106 (ESP32-S3) | |
USB connector | USB-C | |
Pins | Built-in LED Pin | 13 |
Built-in RGB LED pins | 14-16 | |
Digital I/O Pins | 14 | |
Analog input pins | 8 | |
PWM pins | 5 | |
External interrupts | All digital pins | |
Connectivity | Wi-Fi | u-blox NORA-W106 (ESP32-S3) |
Bluetooth | u-blox NORA-W106 (ESP32-S3) | |
Communication | UART | 2x |
I2C | 1x, A4 (SDA), A5 (SCL) | |
SPI | D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS) | |
Power | I/O Voltage | 3.3 V |
Input voltage (nominal) | 6-21 V | |
Source Current per I/O Pin | 40 mA | |
Sink Current per I/O Pin | 28 mA | |
Clock speed | Processor | up to 240 MHz |
Memory | ROM | 384 kB |
SRAM | 512 kB | |
External Flash | 128 Mbit (16 MB) | |
Dimensions | Width | 18 mm |
Length | 45 mm |
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
AVNET Express | ABX00092 | 0 | 1 | $24.44 | $24.44 | $24.44 | $24.44 | $24.44 | $24.44 |
element14 APAC | ABX00092 | 50 | 1 | * $19.21 | * $19.21 | * $19.21 | * $19.21 | * $19.21 | * $19.21 |
Farnell | ABX00092 | 31 | 1 | * $19.09 | * $19.09 | * $19.09 | * $19.09 | * $19.09 | * $19.09 |
Mouser Electronics | ABX00092 | 473 | 1 | $19.90 | $19.90 | $19.90 | $19.90 | $19.90 | $19.90 |
Newark | ABX00092 | 2 | 1 | $19.35 | $19.35 | $19.35 | $19.35 | $19.35 | $19.35 |
Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
---|---|---|---|---|---|---|---|---|---|
AVNET Express | ABX00041 | 0 | 1 | $90.61 | $90.61 | $90.61 | $90.61 | $90.61 | $90.61 |
element14 APAC | ABX00041 | 7 | 1 | * $65.43 | * $64.28 | * $64.28 | * $64.28 | * $64.28 | * $64.28 |
Farnell | ABX00041 | 11 | 1 | * $65.16 | * $65.16 | * $65.16 | * $65.16 | * $65.16 | * $65.16 |
Mouser Electronics | ABX00041 | 2 | 1 | $77.41 | $77.41 | $77.41 | $77.41 | $77.41 | $77.41 |
Newark | ABX00041 | 0 | 1 | $53.09 | $53.09 | $53.09 | $53.09 | $53.09 | $53.09 |