High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier Features: Low power: 330 μA maximum quiescent current Rail-to-rail output Low noise and distortion 8 nV/√Hz maximum input voltage noise at 1 kHz 0.15 μV p-p RTI noise (G = 100) 0.5 ppm nonlinearity with 2 kΩ load (G = 1) Excellent ac specifications 80 dB minimum CMRR at 10 kHz (G = 1) 2.2 MHz bandwidth (G = 1) High precision dc performance (AD8422BRZ) 150 dB minimum CMRR (G = 1000) 0.04% maximum gain error (G = 1000) 0.3 μV/°C maximum input offset drift 0.5 nA maximum input bias current Wide supply range 4.6 V to 36 V single supply ±2.3 V to ±18 V dual supply Input overvoltage protection: 40 V from opposite supply Gain range: 1 to 1000 Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC_N

60 MHz, 2000 V/s, Monolithic Op Amp with Quad Low Noise Features: Wide bandwidth 60 MHz at gain of −1  33 MHz at gain of −10  Slew rate: 2000 V/μs  20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω  Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz  Differential phase error: 0.16° at 4.4 MHz  Low offset voltage: 150 μV maximum (B Grade) Low quiescent current: 6.5 mA  Available in tape and reel in accordance with EIA-481-A standard

High Speed, Low Power Monolithic Op Amp Features:Superior PerformanceHigh Unity Gain BW: 50 MHzLow Supply Current: 5.3 mAHigh Slew Rate: 300 V/sExcellent Video SpecificationsDrives Any Capacitive LoadFast Settling Time to 0.1% (10 V Step): 65 nsExcellent DC PerformanceHigh Open-Loop Gain 5.5 V/mV (PLOAD = 1 k)Low Input Offset Voltage: 0.5 mVSpecified for 5 V and 15 V OperationAvailable in a Wide Variety of OptionsPlastic DIP and SOIC PackagesCerdip PackageDie FormMIL-STD-883B ProcessingTape & Reel (EIA-481A Standard)Dual Version Available: AD827 (8 lead)Enhanced Replacement for LM6361

+5 Volt, Serial Input, Dual 12-Bit DAC Features: Complete Dual 12-Bit DAC No External Components +5 Single-Supply Operation ±10% 4.095 V Full Scale (1 mV/LSB) Buffered Voltage Outputs Low Power: 5 mW/DAC Space Saving 1.5mm Height SO-14 Package

Digitally Programmable Sensor Signal Amplifier with EMI Filters Features: EMI filters at input pins Specified from −40°C to +140°C Low offset voltage: 10 μV maximum Low input offset voltage drift: 65 nV/°C maximum High CMRR: 94 dB minimum Digitally programmable gain and output offset voltage Programmable output clamp voltage Open and short wire fault detection Low-pass filtering Single-wire serial interface Stable with any capacitive load SOIC_N and LFCSP_VQ packages 4.5 V to 5.5 V operation

Ultrafast 7 ns Single Supply Comparator Features: 7 ns propagation delay at 5 V Single supply operation: 3 V to 10 V Low power Latch function TSSOP packages

DigiTrim RRIO Quad Op Amp with Very Low Offset Voltage Features: Low Offset Voltage: 500 µV Max Single-Supply Operation: 2.7 V to 5.5 V Low Supply Current: 750 µA/Amplifier Wide Bandwidth: 8 MHz Slew Rate: 5 V/µs Low Distortion No Phase Reversal Low Input Currents Unity Gain Stable

Low Input Bias Current, Wide BW JFET Precision Dual Op Amp Features: Low Noise 6 nV/√Hz Low Offset Voltage: 100 µV Max Low Input Bias Current 10 pA Max Fast Settling: 600 ns to 0.01% Low Distortion Unity Gain Stable No Phase Reversal Dual-Supply Operation: ±5 V to ±13 V

SPI Interface, 1.5 RON, 15 V/+12 V, Quad SPST Switch, Mux Configurable Features: SPI interface with error detection Includes CRC, invalid read/write address, and SCLK count error detection Supports burst mode and daisy-chain mode Industry-standard SPI Mode 0 and Mode 3 interface compatible Guaranteed break-before-make switching allowing external wiring of switches to deliver multiplexer configurations 1.5 typical on resistance at 25°C 0.3 typical on resistance flatness at 25°C 0.1 typical on resistance match between channels at 25°C VSS to VDD analog signal range Fully specified at ±15 V, ±5 V, and +12 V 1.8 V logic compatibility with 2.7 V ≤ VL ≤ 3.3 V 24-lead LFCSP

SPI Interface, 1 RON, 5 V, 12 V, 5 V, 3.3 V, Mux Configurable, Quad SPST Switch Features: SPI interface with error detection Includes CRC, invalid read/write address, and SCLK count error detection Supports burst mode and daisy-chain mode Industry-standard SPI Mode 0 and SPI Mode 3 interface compatible Guaranteed break-before-make switching allowing external wiring of switches to deliver multiplexer configurations 1 Ω typical on resistance at 25°C 0.23 Ω typical on resistance flatness at 25°C VSS to VDD analog signal range Fully specified at ±5 V, 12 V, 5 V, and 3.3 V ±3.3 V to ±8 V dual-supply operation 3.3 V to 16 V single-supply operation 1.8 V logic compatibility with 2.7 V ≤ VL ≤ 3.3 V 4 mm × 4 mm, 24-lead LFCSP package