LTC4223-1 | Dual Supply Hot Swap Controller for AMC (Latch Off After Fault)
Analog Devices Inc.
DC1162A-A: Demo Board for LTC4223 Dual Supply Hot Swap Controller for Advanced Mezzanine Card
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC1162A-A-ND | 0 | 1 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 |
| Analog Devices Inc | DC1162A-A | 0 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | |
| Arrow North American Components | DC1162A-A | 0 | 1 | $87.19 | $86.31 | $84.60 | $83.75 | $81.26 | $80.45 |
| Mouser Electronics | 584-DC1162A-A | 0 | 1 | $91.82 | $91.82 | $91.82 | $91.82 | $91.82 | $91.82 |
Manufacturer Page
LT8603 Demo Board | 42V, Quad Output Triple Monolithic Buck Converter and Boost Controller
Analog Devices Inc.
Demonstration Circuit 2114A features the LT8603 with triple monolithic buck regulators and a boost controller. The demo circuit is designed for 8.0V, 5.0V, 3.3V, and 1.8V outputs from a nominal 12V input. The 4th channel is set as a boost converter and is powered from a wide input range with output VOUT4 regulated at 8V if 3V < VIN < 8.5V. It works as diode pass through if the input is above 8.5V. The two high voltage buck regulators are powered from the boost converter. VOUT1 is regulated at 5V with 1.5A maximum output load current, and VOUT2 is at 3.3V with 2.5A maximum output load current. Thanks to the pre-boost converter, they can ride through a cold crank in automotive applications while providing constant output voltages 5V and 3.3V. The low voltage buck is powered from the VOUT2 (3.3V), and the output VOUT3 is regulated at 1.8V with 1.8A maximum load current.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 161-DC2114A-ND | 1 | 1 | $118.21 | $118.21 | $118.21 | $118.21 | $118.21 | $118.21 |
| Analog Devices Inc | DC2114A | 0 | $100.05 | $100.05 | $100.05 | $100.05 | $100.05 | $100.05 | |
| Mouser Electronics | 584-DC2114A | 0 | 1 | $104.06 | $104.06 | $104.06 | $104.06 | $104.06 | $104.06 |
LTC4235-2 Demo Board | Dual 12V Ideal Diode-OR & Single Hot Swap Controller with Current Monitor, Auto-Retry
Analog Devices Inc.
Demonstration circuit 2315A is intended to demonstrate the performance of the LTC4235-1/LTC4235-2 Dual 12V Ideal Diode-OR and Single Hot Swap™ Controller with Current Monitor. The controller operates in redundant 12V supply circuits, where each rail has an individual ideal diode, and the outputs are connected to the load through a single Hot Swap circuit. The controller enables monitoring of the load current by providing a signal that is 100× the sense resistor voltage.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC2315A-B-ND | 0 | 1 | $95.38 | $95.38 | $95.38 | $95.38 | $95.38 | $95.38 |
| Analog Devices Inc | DC2315A-B | 0 | $80.25 | $80.25 | $80.25 | $80.25 | $80.25 | $80.25 | |
| Arrow North American Components | DC2315A-B | 0 | 1 | $80.20 | $78.47 | $76.91 | $76.14 | $73.87 | $73.14 |
| Mouser Electronics | 584-DC2315A-B | 0 | 1 | $83.47 | $83.47 | $83.47 | $83.47 | $83.47 | $83.47 |
| Verical Marketplace | DC2315A-B | 65 | 1 | $86.96 | $82.19 | $80.00 | $80.00 | $80.00 | $80.00 |
LT3753EFE Isolated Demo Board | Sync Forward Controller with Active Clamp, 9V ≤ VIN ≤ 18V; VOUT = 24V @ 4A
Analog Devices Inc.
Demonstration circuits 2324A-A, 2324A-B, and 2324A-C are active clamp forward converters with synchronous rectification featuring the LT3753.
These circuits were designed to demonstrate the high level of performance, efficiency and small solution size attainable using this part. They operate at 240kHz. The DC2324A-A produces a 24V/5A output from an input voltage range of 36V to 72V. The DC2324A-B produces a 24V/5A output from an input voltage range of 18V to 36V. The DC2324A-C produces a 24V/4A output from an input voltage range of 9V to 18V, making it suitable for telecom, industrial and other isolated power supply applications. They all have an eighth-brick footprint area. Synchronous rectification helps to attain efficiency exceeding 94% (exceeding 95% for the DC2324A-A and DC2324A-B).
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC2324A-C-ND | 2 | 1 | $205.46 | $205.46 | $205.46 | $205.46 | $205.46 | $205.46 |
| Analog Devices Inc | DC2324A-C | 0 | $176.55 | $176.55 | $176.55 | $176.55 | $176.55 | $176.55 | |
| Arrow North American Components | DC2324A-C | 0 | 1 | $174.37 | $172.63 | $169.19 | $167.50 | $162.52 | $160.90 |
| Mouser Electronics | 584-DC2324A-C | 0 | 1 | $183.62 | $183.62 | $183.62 | $183.62 | $183.62 | $183.62 |
| Verical Marketplace | DC2324A-C | 73 | 1 | $174.69 | $174.69 | $174.69 | $174.69 | $174.69 | $174.69 |
LTC4421 Demo Board | Dual Channel Prioritized Powerpath Controller
Analog Devices Inc.
Demonstration circuit 2866A features the LTC4421 Dual
Supply High Power Prioritized Powerpath™ Controller in
a 12V/24V, 10A application. The LTC4421 incorporates
strong gate drivers to switch large external N-channel
MOSFETs and fast switchover circuitry to minimize VOUT
droop while preventing reverse and cross conduction
currents, making it an ideal solution for high reliability
systems, battery back up systems, and servers. DC2866A
arbitrates between two input supply rails, selecting the
highest priority, valid supply to power the load. By definition, the supply connected to V1 is the higher priority
supply, although it can be changed dynamically. External
resistive dividers set the undervoltage and overvoltage
thresholds that bound the valid voltage window. External
sense resistors set the limit on maximum current that can flow to the load. Two or more DC2866As can be cascaded
to provide switchover between more than two rails.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 505-DC2866A-ND | 3 | 1 | $131.72 | $131.72 | $131.72 | $131.72 | $131.72 | $131.72 |
| Analog Devices Inc | DC2866A | 0 | $111.81 | $111.81 | $111.81 | $111.81 | $111.81 | $111.81 | |
| Arrow North American Components | DC2866A | 0 | 1 | $104.26 | $104.26 | $104.26 | $104.26 | $104.26 | $104.26 |
| element14 APAC | DC2866A | 1 | 1 | * $136.81 | * $136.81 | * $136.81 | * $136.81 | * $136.81 | * $136.81 |
| Farnell | DC2866A | 1 | 1 | * $112.56 | * $112.56 | * $112.56 | * $112.56 | * $112.56 | * $112.56 |
| Mouser Electronics | 584-DC2866A | 8 | 1 | $115.72 | $115.72 | $115.72 | $115.72 | $115.72 | $115.72 |
| Newark | DC2866A | 1 | 1 | $131.89 | $131.89 | $131.89 | $131.89 | $131.89 | $131.89 |
| Verical Marketplace | DC2866A | 32 | 1 | $110.64 | $110.64 | $110.64 | $110.64 | $110.64 | $110.64 |
LTC1420CGN | 12-Bit 10Msps ADC (requires DC718 controller)
Analog Devices Inc.
DC552A: Demo Board for the LTC1420 12-Bit, 10Msps,Sampling ADC.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC552A-ND | 2 | 1 | $245.83 | $245.83 | $245.83 | $245.83 | $245.83 | $245.83 |
| Analog Devices Inc | DC552A | 0 | $173.05 | $173.05 | $173.05 | $173.05 | $173.05 | $173.05 | |
| Arrow North American Components | DC552A | 0 | 1 | $237.83 | $235.45 | $230.76 | $228.45 | $221.67 | $219.45 |
| Mouser Electronics | 584-DC552A | 0 | 1 | $206.99 | $206.99 | $206.99 | $206.99 | $206.99 | $206.99 |
| Verical Marketplace | DC552A | 68 | 1 | $247.58 | $247.58 | $247.58 | $247.58 | $247.58 | $247.58 |
LTC4278 IEEE802.3at PD Controller with 12V Auxiliary, VOUT = 5V, IOUT = 4.5A
Analog Devices Inc.
DC1561B: Demo Board for the LTC4278 IEEE 802.3at PD with Synchronous No-Opto Flyback Controller and 12V Auxiliary Support.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC1561B-ND | 1 | 1 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 |
| Analog Devices Inc | DC1561B | 0 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | |
| Arrow North American Components | DC1561B | 0 | 1 | $82.66 | $82.66 | $82.66 | $82.66 | $82.66 | $82.66 |
| Mouser Electronics | 584-DC1561B | 5 | 1 | $91.36 | $91.36 | $91.36 | $91.36 | $91.36 | $91.36 |
| Verical Marketplace | DC1561B | 32 | 1 | $87.35 | $0.00 | $0.00 | $0.00 | $0.00 | $0.00 |
LTC4227CUFD-3 Demo Board: Dual Ideal Diode and Single Hot Swap Controller with Fault Latch-Off and 1.6ms On Delay
Analog Devices Inc.
Demonstration circuit 1625A is intended to demonstrate performance of the LTC4227-1/LTC4227-2/LTC4227-3/LTC4227-4 dual ideal diode and Hot Swap™ controller. Each rail has an individual ideal diode. Ideal diode outputs are connected to the load through a single Hot Swap circuit.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC1625A-C-ND | 2 | 1 | $95.38 | $95.38 | $95.38 | $95.38 | $95.38 | $95.38 |
| Analog Devices Inc | DC1625A-C | 0 | $80.25 | $80.25 | $80.25 | $80.25 | $80.25 | $80.25 | |
| Arrow North American Components | DC1625A-C | 0 | 1 | $79.26 | $78.47 | $76.91 | $76.14 | $73.87 | $73.14 |
| Mouser Electronics | 584-DC1625A-C | 0 | 1 | $83.47 | $83.47 | $83.47 | $83.47 | $83.47 | $83.47 |
LTC4226CUD-1 Demo Board: Dual Hot Swap Controller with Latch Off
Analog Devices Inc.
DC1627A-A: Demo Board for the LTC4226 Wide Operating Range Dual Hot Swap Controller.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC1627A-A-ND | 0 | 1 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 | $104.65 |
| Analog Devices Inc | DC1627A-A | 0 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | $88.28 | |
| Arrow North American Components | DC1627A-A | 0 | 1 | $87.19 | $86.31 | $84.60 | $83.75 | $81.26 | $80.45 |
| Mouser Electronics | 584-DC1627A-A | 0 | 1 | $92.55 | $92.55 | $92.55 | $92.55 | $92.55 | $92.55 |
LT8312EMS Demo Board | Boost Controller with PFC, 90VAC ≤ VIN ≤ 265VAC; VOUT = 400Vdc @ 0.375A
Analog Devices Inc.
Demonstration Circuit 2104A is an off-line boundary conduction mode power factor correction (PFC) boost converter featuring the LT8312. Boundary conduction mode offers inherent MOSFET valley switching to reduce the switching loss and the boost diode zero current switching to remove the diode reverse-recovery loss. The demo board provides a 400V/150W single constant-voltage output suitable for applications requiring regulated input voltage.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 |
|---|---|---|---|---|---|---|---|---|---|
| DigiKey | DC2104A-ND | 2 | 1 | $271.86 | $271.86 | $271.86 | $271.86 | $271.86 | $271.86 |
| Analog Devices Inc | DC2104A | 0 | $235.40 | $235.40 | $235.40 | $235.40 | $235.40 | $235.40 | |
| element14 APAC | DC2104A | 3 | 1 | * $297.08 | * $297.08 | * $297.08 | * $297.08 | * $297.08 | * $297.08 |
| Farnell | DC2104A | 3 | 1 | * $273.32 | * $273.32 | * $273.32 | * $273.32 | * $273.32 | * $273.32 |
| Mouser Electronics | 584-DC2104A | 4 | 1 | $250.84 | $250.84 | $250.84 | $250.84 | $250.84 | $250.84 |
| Newark | DC2104A | 3 | 1 | $241.45 | $241.45 | $241.45 | $241.45 | $241.45 | $241.45 |
| Win Source | DC2104A | 4790 |