The AD7983 is a 16-bit, successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD. It contains a low power, high speed, 16-bit sampling ADC and a versatile serial interface port. On the CNV rising edge, it samples an analog input IN+ between 0 V to REF with respect to a ground sense IN?. The reference voltage, REF, is applied externally and can be set independent of the supply voltage, VDD. Its power scales linearly with throughput.The SPI-compatible serial interface also features the ability, using the SDI input, to daisy-chain several ADCs on a single, 3-wire bus and provides an optional busy indicator. It is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using the separate supply VIO.The AD7983 is housed in a 10-lead MSOP or a 10-lead LFCSP with operation specified from ?40?C to +85?.APPLICATIONS Automated test equipment Data acquisition systems Medical instruments Machine automation

The AD7997?/ AD7998 are 8-channel, 10- and 12-bit, low power,successive approximation ADCs with an I2C-compatibleinterface. The parts operate from a single 2.7 V to 5.5 V powersupply and feature a 2 ?s conversion time. The parts contain an8-channel multiplexer and track-and-hold amplifier that canhandle input frequencies up to 11 MHz.The AD7997 / AD7998 provide a 2-wire serial interface that iscompatible with I2C interfaces. Each part comes in two versions,AD7997-0 / AD7998-0 and AD7997-1 / AD7998-1, and eachversion allows at least two different I2C addresses. The I2C interface on the AD7997-0/AD7998-0 supports standard andfast I2C interface modes. The I2C interface on the AD7997-1 / AD7998-1 supports standard, fast, and high speed I2C interface modes.The AD7997 / AD7998 normally remain in a shutdown statewhile not converting, and power up only for conversions. Theconversion process can be controlled using the CONVST pin,by a command mode where conversions occur across I2C writeoperations or an automatic conversion interval mode selectedthrough software control. The AD7997 / AD7998 require an external reference that shouldbe applied to the REFIN pin and can be in the range of 1.2 V toVDD. This allows the widest dynamic input range to the ADC. On-chip limit registers can be programmed with high andlow limits for the conversion result, and an open-drain, out-of-range indicator output (ALERT) becomes active when theprogrammed high or low limits are violated by the conversionresult. This output can be used as an interrupt.PRODUCT HIGHLIGHTS 2 ?s conversion time with low power consumption. I2C-compatible serial interface with pin-selectable addresses. Two AD7997/AD7998 versions allow five AD7997/AD7998 devices to be connected to the same serial bus. The parts feature automatic shutdown while not converting to maximize power efficiency. Current consumption is 1 ?A max when in shutdown mode at 3V. Reference can be driven up to the power supply. Out-of-range indicator that can be software disabled or enabled. One-shot and automatic conversion rates. Registers store minimum and maximum conversion results.

The AD8452 combines a precision analog front-end controller and switch mode power supply (SMPS), pulse-width modulator (PWM) driver into a single silicon platform for high volume battery testing and formation manufacturing. A precision instrumentation amplifier (in-amp) measures the battery charge/discharge current, while an equally accurate difference amplifier measures the battery voltage. Internal laser trimmed resistor networks establish the in-amp and difference amplifier gains (66 V/V and 0.4 V/V, respectively), and stabilize the AD8452 performance across the rated operating temperature range.Desired battery cycling current and voltage levels are established by applying precise control voltages to the ISET and VSET inputs. Actual charge and discharge current levels are sensed (usually by a high power, highly accurate shunt resistor) whose value is carefully selected according to system parameters. Switching between constant current (CC) and constant voltage (CV) loop integration is instantaneous, automatic, and completely transparent to the observer. A logic high at the MODE input selects the charge or discharge mode (high for charge, low for discharge).The AD8452 simplifies designs by providing excellent performance, functionality, and overall reliability in a space saving 48-lead, 7 mm ? 7 mm ? 1.4 mm LQFP package rated for operation at temperatures from ?40?C to +85?C.Applications Battery formation and testing High efficiency battery test systems with recycle capability Battery conditioning (charging and discharging) systems

The ADA4097-1/ADA4097-2 are single and dual robust, precision, rail-to-rail input and output operational amplifiers (op amps) with inputs that operate from ?VS to +VS and beyond, which are referred to in this data sheet as Over-The-Top?. The devices feature offset voltages of ?VS, independent of the +VS supply.The ADA4097-1/ADA4097-2 are unity-gain stable and can drive loads requiring up to 20 mA per channel. The devices can also drive capacitive loads as large as 200 pF. The amplifiers are available with low power shutdown.The ADA4097-1 is available in a standard, 6-lead thin small outline transistor (TSOT) package. The ADA4097-2 is available in an 8-lead standard small outline (SOIC_N) package, 8-lead mini small outline package (MSOP), and 10-lead lead-frame chip-scale package (LFCSP).APPLICATIONS Industrial sensor conditioning Supply current sensing Battery and power supply monitoring Front-end amplifiers in abusive environments 4 mA to 20 mA transmitters

The ADA4099-1 and ADA4099-2 are single/dual robust, precision, rail-to-rail input/output operational amplifiers (op amps) with inputs that operate from ?VS to +VS and beyond, which is referred to in this data sheet as Over-The-Top?. The devices feature offset voltages of ?VS, independent of the +VS supply.The ADA4099-1 and ADA4099-2 are unity-gain stable and can drive loads requiring up to 20 mA per channel. The device can also drive capacitive loads as large as 100 pF. The amplifiers are available with low power shutdown.The ADA4099-1 is available in a standard, 6-lead, thin small outline transistor (TSOT) package. The ADA4099-2 is available in an 8- lead, standard small outline package (SOIC_N), 8-lead, mini small outline package (MSOP), and a 10-lead, lead frame chip scale package (LFCSP).APPLICATIONS Industrial sensor conditioning Supply current sensing Battery and power supply monitoring Front-end amplifiers in abusive environments 4 mA to 20 mA transmitters

The ADA4099-1 and ADA4099-2 are single/dual robust, precision, rail-to-rail input/output operational amplifiers (op amps) with inputs that operate from ?VS to +VS and beyond, which is referred to in this data sheet as Over-The-Top?. The devices feature offset voltages of ?VS, independent of the +VS supply.The ADA4099-1 and ADA4099-2 are unity-gain stable and can drive loads requiring up to 20 mA per channel. The device can also drive capacitive loads as large as 100 pF. The amplifiers are available with low power shutdown.The ADA4099-1 is available in a standard, 6-lead, thin small outline transistor (TSOT) package. The ADA4099-2 is available in an 8- lead, standard small outline package (SOIC_N), 8-lead, mini small outline package (MSOP), and a 10-lead, lead frame chip scale package (LFCSP).APPLICATIONS Industrial sensor conditioning Supply current sensing Battery and power supply monitoring Front-end amplifiers in abusive environments 4 mA to 20 mA transmitters

The ADA4350 is an analog front end for photodetectors or othersensors whose output produces a current proportional to thesensed parameter or voltage input applications where the systemrequires the user to select between very precise gain levels tomaximize the dynamic range.The ADA4350 integrates a FET input amplifier, a switching network,and an ADC driver with all functions controllable via a serialperipheral interface (SPI) or parallel control logic into a singleIC. The FET input amplifier has very low voltage noise and currentnoise making it an excellent choice to work with a wide range ofphotodetectors, sensors, or precision data acquisition systems.Its switching network allows the user individual selection of upto six different, externally configurable feedback networks; byusing external components for the feedback network, the usercan more easily match the system to their desired photodetector orsensor capacitance. This feature also allows the use of low thermaldrift resistors, if required.The design of the switches minimizes error sources so that theyadd virtually no error in the signal path. The output driver canbe used in either single-ended or a differential mode and isideal for driving the input of an ADC.The ADA4350 can operate from a single +3.3 V supply or a dual?5 V supply, offering user flexibility when choosing the polarity ofthe detector. It is available in a Pb-free, 28-lead TSSOP package andis specified to operate over the ?40?C to +85?C temperature range.Multifunction pin names may be referenced by their relevantfunction only.Applications Current to voltage (I to V) conversions Photodiode preamplifiers Chemical analyzers Mass spectrometry Molecular spectroscopy Laser/LED receivers Data acquisition systems

The ADAQ4001 is a ?Module? precision data acquisition (DAQ), signal chain solution that reduces the development cycle of a precision measurement system by transferring the signal chain design challenge of component selection, optimization, and layout from the designer to the device. Using system-in-package (SIP) technology, the ADAQ4001 reduces end system component count by combining multiple common signal processing and conditioning blocks into a single device. These blocks include a high resolution 16-bit, 2 MSPS successive approximation register (SAR), analog-to-digital converter (ADC), a low noise, fully differential ADC driver amplifier (FDA), and a stable reference buffer. Using Analog Devices, Inc., iPassives? technology, the ADAQ4001 also incorporates crucial passive components with superior matching and drift characteristics to minimize temperature dependent error sources and to offer optimized performance (see Figure 1 in the data sheet). Housing this signal chain solution in a small, 7 mm ? 7 mm, 0.80 mm pitch, 49-ball CSP_BGA enables compact form factor designs without sacrificing performance and simplifies end system bill of materials management. This level of system integration makes the ADAQ4001 much less sensitive to printed circuit board (PCB) layout while still providing flexibility to adapt to a wide range of signal levels. The serial peripheral interface (SPI)-compatible, serial user interface is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using a separate VIO supply. Specified operation of the ADAQ4001 is from ?40?C to +125?C.APPLICATIONSAutomatic test equipmentMachine automationProcess controlsMedical instrumentationDigital control loops

The ADAQ4003 is a ?Module? precision data acquisition (DAQ), signal chain solution that reduces the development cycle of a precision measurement system by transferring the signal chain design challenge of component selection, optimization, and layout from the designer to the device.Using system-in-package (SIP) technology, the ADAQ4003 reduces end system component count by combining multiple common signal processing and conditioning blocks into a single device. These blocks include a high resolution 18-bit, 2 MSPS successive approximation register (SAR), analog-to-digital converter (ADC), a low noise, fully differential ADC driver amplifier (FDA), and a stable reference buffer.Using Analog Devices, Inc., iPassives? technology, the ADAQ4003 also incorporates crucial passive components with superior matching and drift characteristics to minimize temperature dependent error sources and to offer optimized performance (see Figure 1 in the data sheet). Housing this signal chain solution in a small, 7 mm ? 7 mm, 0.80 mm pitch, 49-ball CSP_BGA enables compact form factor designs without sacrificing performance and simplifies end system bill of materials management. This level of system integration makes the ADAQ4003 much less sensitive to printed circuit board (PCB) layout while still providing flexibility to adapt to a wide range of signal levels.The serial peripheral interface (SPI)-compatible, serial user interface is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic, using a separate VIO supply. Specified operation of ADAQ4003 is from ?40?C to +125?C.APPLICATIONS Automatic test equipment Machine automation Process controls Medical instrumentation Digital control loops

The ADAS1000 measures electrocardiac (ECG) signals, thoracic impedance, pacing artifacts,and lead-on/lead-off status and output this information in theform of a data frame supplying either lead/vector or electrodedata at programmable data rates. Its low power and small sizemake it suitable for portable, battery-powered applications.The high performance also makes it suitable for higher enddiagnostic machines. The ADAS1000 is a full-featured, 5-channel ECG includingrespiration and pace detection, while the ADAS1000-1 offersonly ECG channels with no respiration or pace features. Similarly,the ADAS1000-2 is a subset of the main device and is configuredfor gang purposes with only the ECG channels enabled (norespiration, pace, or right leg drive).The ADAS1000/ADAS1000-1/ADAS1000-2 are designed tosimplify the task of acquiring and ensuring quality ECG signals.They provide a low power, small data acquisition system forbiopotential applications. Auxiliary features that aid in betterquality ECG signal acquisition include multichannel averageddriven lead, selectable reference drive, fast overload recovery,flexible respiration circuitry returning magnitude and phaseinformation, internal pace detection algorithm operating onthree leads, and the option of ac or dc lead-off detection. Severaldigital output options ensure flexibility when monitoring andanalyzing signals. Value-added cardiac post processing isexecuted externally on a DSP, microprocessor, or FPGA.Because ECG systems span different applications, theADAS1000/ADAS1000-1/ADAS1000-2 feature a power/noisescaling architecture where the noise can be reduced at theexpense of increasing power consumption. Signal acquisitionchannels can be shut down to save power. Data rates can bereduced to save power.To ease manufacturing tests and development as well as offerholistic power-up testing, the ADAS1000/ADAS1000-1/ADAS1000-2 offer a suite of features, such as dc and ac testexcitation via the calibration DAC and cyclic redundancy check(CRC) redundancy testing, in addition to readback of allrelevant register address space.The input structure is a differential amplifier input, therebyallowing users a variety of configuration options to best suittheir application.The ADAS1000/ADAS1000-1/ADAS1000-2 are available in twopackage options, a 56-lead LFCSP package and a 64-lead LQFPpackage. Both packages are specified over a ?40?C to +85?Ctemperature range. APPLICATIONSECG: Monitor & Diagnostic Bedside Patient Monitoring Portable Telemetry Holter AED Cardiac Defibrillators Ambulatory Monitors Pace Maker Programmer Patient Transport Stress testing