DC956A: Demo Board for the LTC2485 24-Bit Delta Sigma ADC with Easy Drive Input Current Cancellation and I2C Interface.

DC962A-C: Demo Board for the LT6600-10 Very Low Noise, Differential Amplifier and 10MHz Lowpass Filter.

DC963B: Demo Board for the LT5560 0.01MHz to 4GHz Low Power Active Mixer.

DC966A: Demo Board for the LT5568 700MHz to 1050MHz High Linearity Direct Quadrature Modulator.

Demonstration circuit 967B is a single output high frequency step-down DC/DC controller featuring the low quiescent current LTC3835 in a 20-pin exposed pad TSSOP package. The DC967B is designed to generate a regulated 3.3V@5A output from 4.5V to 36V input voltage.

DC997B-E - Demo Board for the LTC2241-10 10-Bit, 210Msps ADC.

DC998A - Demo Board for the LTC4261 Negative Voltage Hot Swap Controllers with ADC and I2C Monitoring.

The HMC8200LP5ME is a highly integrated intermediatefrequency (IF) transmitter chip that converts the industrystandard 300 MHz to 400 MHz IF input signals to an 800 MHz to4000 MHz single-ended radio frequency (RF) signal at its output.The IF transmitter chip is housed in a compact 5 mm ? 5 mmLFCSP package and supports complex modulations up to1024 QAM. The HMC8200LP5ME simultaneously reduces thedesign complexity of traditional microwave radios while realizingsignificant size and cost improvements. With IF input powerranges from ?31 dBm to +4 dBm, the HMC8200LP5MEprovides 35 dB of digital gain control in 1 dB steps and ananalog voltage gain amplifier (VGA) continuously controls thetransmitter output power from ?20 dBm to +5 dBm.The device also features three integrated power detectors. Thefirst detector (LOG_IF) can be utilized to monitor the IF inputpower. The second detector (SLPD_OUT) is a square law powerdetector that monitors the power entering the mixer. The thirdpower detector (LOG_RF) is used to monitor the output power,which can be used for fine output power adjustment.Applications Point to point communications Satellite communications Wireless microwave backhaul systemsPlease also view complementary product HMC8100, Intermediate Frequency Receiver 800 MHz - 4000 MHz

The HMC832A is a 3.3 V, high performance, wideband, fractional-N, phase-locked loop (PLL) that features an integrated voltage controlled oscillator (VCO) with a fundamental frequency of 1500 MHz to 3000 MHz and an integrated VCO output divider (divide by 1, 2, 4, 6, ? 62) that enables the HMC832A to generate continuous frequencies from 25 MHz to 3000 MHz. The integrated phase detector (PD) and ?-? modulator, capable of operating at up to 100 MHz, permit wider loop bandwidths and faster frequency tuning with excellent spectral performance.Industry leading phase noise and spurious performance, across all frequencies, enable the HMC832A to minimize blocker effects, and to improve receiver sensitivity and transmitter spectral purity. A low noise floor (?160 dBc/Hz) eliminates any contribution to modulator/mixer noise floor in transmitter applications.The HMC832A is footprint compatible to the market leading HMC830 PLL with an integrated VCO. It features 3.3 V supply and an innovative programmable performance technology that enables the HMC832A to tailor current consumption and corresponding noise floor performance to individual applications by selecting either a low current consumption mode or a high performance mode for an improved noise floor performance.Additional features of the HMC832A include 12 dB of RF output gain control in 1 dB steps; an output mute function to automatically mute the output during frequency changes when the device is not locked; selectable output return loss; programmable differential or single-ended outputs, with the ability to select either output in single-ended mode; and a ?-? modulator exact frequency mode that enables users to generate output frequencies with 0 Hz frequency error; and a register configurable 3.3 V or 1.8 V serial port interface (SPI).Applications Cellular infrastructure Microwave radios WiMax, WiFi Communications test equipment CATV equipment DDS replacement Military Tunable reference sources for spurious-free performance

The HMC1023 is a 6th order, programmable bandwidth, fully calibrated, dual low pass filter. It features programmable 0 or 10 dB gain and supports arbitrary bandwidths from 5 MHz to 72 MHz. When calibrated, the bandwidth is accurate to +/-2.5%. Built-in filter bypass option enables wider bandwidths while maintaining programmed gain and common mode control settings.Integrated ADC driver, programmable input impedance, and adjustable output common mode voltage from 0.9 V to 3 V with 2 Vppd signal, or lower than 0.9 V common mode with lower signal swing enables simple interface while achieving maximum performance. Programmable bias settings enable performance/power dissipation trade-off optimized for each application.Filter calibration is accomplished with any reference clock rate from 20 to 80 MHz. One time programmable (OTP) memory offers unsurpassed flexibility allowing the user ?set and forget? parameters like gain and bandwidth setting.Housed in a compact 5x5 mm SMT QFN package, the HMC1023 is pin and register compatible to the existing HMC900 programmable bandwidth Low Pass Filter. It requires minimal external components and provides a low cost alternative to more complicated switched discrete filter architectures.The 6th order Butterworth transfer function delivers superior stop band rejection while maintaining both a flat passband and minimal group delay variation.Applications Baseband filtering before or after?data converters for point-to-point fixed?wireless and cellular infrastructure?transceivers Software defined radio applications Anti-aliasing and reconstruction filters Test and measurement equipment ADC driver applications