LMH1218 Evaluation Module

TPA3121D2 Evaluation Module (EVM)

The ADL8121 is a gallium arsenide (GaAs), monolithic microwave integrated circuit (MMIC), pseudomorphic high electron mobility transistor (pHEMT), low noise wideband amplifier that operates from 0.025 GHz to 12 GHz.The ADL8121 provides a typical gain of 16.5 dB, a 2.5 dB typical noise figure, and a typical output third-order intercept (OIP3) of 36 dBm across the 0.025 GHz to 10 GHz frequency range, requiring only 95 mA from a 5 V supply voltage. The saturated output power (PSAT) of 21.5 dBm typical across the 0.025 GHz to 10 GHz frequency range enables the low noise amplifier (LNA) to function as a local oscillator (LO) driver for many of Analog Devices, Inc., balanced, in-phase and quadrature (I/Q) or image rejection mixers.The ADL8121 also features inputs and outputs that are internally matched to 50 ?, making the device ideal for surface-mounted technology (SMT)-based and is housed in a RoHS-compliant, 2 mm ? 2 mm, 6-lead LFCSP.APPLICATIONSTest instrumentationMilitary communicationsMilitary radarTelecommunications

The ADP121 is a quiescent current, low dropout, linear regulator that operates from 2.3 V to 5.5 V and provides up to 150 mA of output current. The low 135 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range. The low 30 ?A of quiescent current at full load makes the ADP121 ideal for battery-operated portable equipment.The ADP121 is available in output voltages ranging from 1.2 V to 3.3 V. The parts are optimized for stable operation with small 1 ?F ceramic output capacitors. The ADP121 delivers good transient performance with minimal board area.Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP121 is available in a tiny 5-lead TSOT and 4-ball 0.4 mm pitch WLCSP pack-ages and utilizes the smallest footprint solution to meet a variety of portable applications.

The ADP121 is a quiescent current, low dropout, linear regulator that operates from 2.3 V to 5.5 V and provides up to 150 mA of output current. The low 135 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range. The low 30 ?A of quiescent current at full load makes the ADP121 ideal for battery-operated portable equipment.The ADP121 is available in output voltages ranging from 1.2 V to 3.3 V. The parts are optimized for stable operation with small 1 ?F ceramic output capacitors. The ADP121 delivers good transient performance with minimal board area.Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP121 is available in a tiny 5-lead TSOT and 4-ball 0.4 mm pitch WLCSP pack-ages and utilizes the smallest footprint solution to meet a variety of portable applications.

The ADGS1212 contains four independent single-pole/single-throw(SPST) switches. A serial peripheral interface (SPI)controls the switches. The SPI interface has robust error detectionfeatures such as cyclic redundancy check (CRC) error detection,invalid read/write address detection, and SCLK count errordetection.It is possible to daisy-chain multiple ADGS1212 devices together.Daisy-chain mode enables the configuration of multiple deviceswith minimal digital lines. The ADGS1212 can also operate inburst mode to decrease the time between SPI commands.iCMOS construction ensures ultralow power dissipation, makingthe device ideal for portable and battery-powered instruments.Each switch conducts equally well in both directions when on,and each switch has an input signal range that extends to thesupplies.In the off condition, signal levels up to the supplies are blocked.The ultralow capacitance and charge injection of these switchesmake them ideal solutions for data acquisition and sample-andholdapplications where low glitch and fast settling are required.Fast switching speed coupled with high signal bandwidth makethe device suitable for video signal switching.Multifunction pin names may be referenced by their relevantfunction only.Product Highlights SPI interface removes the need for parallel conversion, logic traces, and reduces the general-purpose input/output (GPIO) channel count. Daisy-chain mode removes additional logic traces when multiple devices are used. CRC error detection, invalid read/write address detection, and SCLK count error detection ensure a robust digital interface. CRC and error detection capabilities allow the ADGS1212 to be used in safety critical systems. Guaranteed break-before-make switching allows the the ADGS1212 to be used in multiplexer configurations with external wiring. The ADGS1212 1.8 V logic compatibility with 2.7 V ? VL ? 3.3 V Ultralow capacitance. <1 pC charge injection.Applications Automated test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Audio signal routing Video signal routing Communications systems

12-Bit Micro Power Digital-to-Analog Converter with Rail-to-Rail Output

EVAL BOARD FOR BQ25121

LMH2121EVAL Power Detector RF Envelope Detector Evaluation Board/Module

THS3121 Evaluation Module