High Voltage, Isolated IGBT Gate Driver with Fault Detection Features:6 A peak drive output capability Internal turn off NFET, on resistance: <0.95 Ω Internal turn on PFET, on resistance: <1.18 Ω Split emitter overcurrent detection Miller clamp output with gate sense input Isolated fault output Isolated temperature sensor read back Propagation delay Rising: 105 ns typical Falling: 107 ns typical Minimum pulse width: 70 nsOperating junction temperature range (−40°C to +150°C) VDD1 and VDD2 UVLO ASC input 8.3 mm creepage distance Safety and regulatory approvals 5 kV rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 VPEAK (reinforced/basic) AEC-Q100 qualified for automotive applications

5.7kV rms Digital Isolator for Isolated USB 2.0 High Speed (Upstream Clock Input) Features: USB 2.0 signaling with automatic detection of low, full, and high speed connections 1.5 Mbps, 12 Mbps, and 480 Mbps data rates Bidirectional USB isolator for upstream or downstream ports Redriving and high speed data retiming for input jitter removal and an open eye Flexible clock input options 4.5 V to 5.5 V VBUSx or 3 V to 3.6 V operation on each side 21 mA typical idle, low or full speed mode supply current 48 mA typical idle, high speed mode supply current Ultra low power standby in USB 2.0 suspend (L2) or disconnect 1.7 mA typical low power standby, upstream supply current 20 μA typical low power standby, downstream supply current ±8000 V IEC 61000-4-2 ESD protection across the isolation barrier Passed CISPR32/EN55032 Class B emissions High common-mode transient immunity: 50 kV/μs typical Safety and regulatory approvals (pending) UL (pending): 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) IEC 62368-1, IEC 61010-1 and IEC60601‑1 VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK Operating temperature range: −55°C to +125°C 20-lead, wide-body, increased creepage SOIC_IC package with 8.3 mm creepage and clearance

5.7kV rms Digital Isolator for Isolated USB 2.0 High Speed (Upstream Clock Input) Features: USB 2.0 signaling with automatic detection of low, full, and high speed connections 1.5 Mbps, 12 Mbps, and 480 Mbps data rates Bidirectional USB isolator for upstream or downstream ports Redriving and high speed data retiming for input jitter removal and an open eye Flexible clock input options 4.5 V to 5.5 V VBUSx or 3 V to 3.6 V operation on each side 21 mA typical idle, low or full speed mode supply current 48 mA typical idle, high speed mode supply current Ultra low power standby in USB 2.0 suspend (L2) or disconnect 1.7 mA typical low power standby, upstream supply current 20 μA typical low power standby, downstream supply current ±8000 V IEC 61000-4-2 ESD protection across the isolation barrier Passed CISPR32/EN55032 Class B emissions High common-mode transient immunity: 50 kV/μs typical Safety and regulatory approvals (pending) UL (pending): 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) IEC 62368-1, IEC 61010-1 and IEC60601‑1 VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK Operating temperature range: −55°C to +125°C 20-lead, wide-body, increased creepage SOIC_IC package with 8.3 mm creepage and clearance

High Voltage, Isolated IGBT Gate Driver with Isolated Flyback Controller Features: 6 A (typical) peak drive output capability Internal turn off NFET, on resistance: <1 Ω Internal turn on PFET, on resistance: <1.2 Ω 2 overcurrent protection methods Desaturation detection Split emitter overcurrent detection Miller clamp output with gate sense input Isolated fault output Isolated temperature sensor readback Propagation delay Rising: 95 ns typical Falling: 100 ns typical Minimum pulse width: 74 ns Operating junction temperature range: −40°C to +150°C VDD1 and VDD2 UVLO Minimum external tracking (creepage): 8.3 mm (pending) Safety and regulatory approvals 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 VPEAK (reinforced/basic) Qualified for automotive applications

High Voltage, Isolated IGBT Gate Driver with Isolated Flyback Controller Features: 6 A (typical) peak drive output capability Internal turn off NFET, on resistance: <1 Ω Internal turn on PFET, on resistance: <1.2 Ω 2 overcurrent protection methods Desaturation detection Split emitter overcurrent detection Miller clamp output with gate sense input Isolated fault output Isolated temperature sensor readback Propagation delay Rising: 95 ns typical Falling: 100 ns typical Minimum pulse width: 74 ns Operating junction temperature range: −40°C to +150°C VDD1 and VDD2 UVLO Minimum external tracking (creepage): 8.3 mm (pending) Safety and regulatory approvals 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 VPEAK (reinforced/basic) Qualified for automotive applications

Single Gate, Adjustable Slew Rate, Isolated Gate Driver, 3 A Short-Circuit (<3 ) Features:2 A output current per output pin (<3 Ω RDSON_X) 3 A peak short-circuit current 3.3 V to 6.5 V, VDD1 4.5 V to 35 V, VDD2 Positive going threshold, UVLO at 3.3 V VDD1 Multiple positive going thresholds, UVLO options on VDD2 Grade A: 4.4 V (typical) positive going threshold, UVLO Grade B: 7.3 V (typical) positive going threshold, UVLO Grade C: 11.3 V (typical) positive going threshold, UVLO Precise timing characteristics 48 ns maximum propagation delay for falling edge CMOS input logic levels High common-mode transient immunity: >150 kV/µsHigh junction temperature operation: 125°C Default low output Selectable slew rate control Safety and regulatory approvals (pending) UL recognition per UL 1577 5 kV rms for 1 minute CSA Component Acceptance Notice 5A VDE certificate of conformity (pending) DIN V VDE V 0884-10 VIORM = 849 V peak Wide-body, 8-lead SOIC_IC

11 A High Voltage Isolated Bipolar Gate Driver with Fault Detection, Miller Clamp Features: 11 A short-circuit source current (0 Ω gate resistance) 9 A short-circuit sink current (0 Ω gate resistance) 4.61 A peak current (2 Ω gate resistance) Output power device resistance: <1 Ω Output voltage range up to 30 V Multiple UVLO options on VDD2 Grade A: 14.5 V (typical) UVLO on VDD2 positive going threshold Grade B and Grade C: 11.5 V (typical) UVLO on VDD2 positive going threshold VDD1 input voltage range from 2.5 V to 6 V Desaturation protection Soft shutdown on desaturation fault Multiple desaturation detect comparator voltages Grade B: 9.2 V (typical) Grade A and Grade C: 3.5 V (typical) Miller clamp output with gate sense input Isolated fault and ready functions Low propagation delay: 75 ns (typical) Operating temperature range: −40°C to +125°C Creepage distance: 8.3 mm minimum CMTI: 100 kV/μs Safety and regulatory approvals (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-11 VIORM = 2150 V peak

High Stability Isolated Error Amplifier Features: Stable over time and temperature 0.5% initial accuracy 1% accuracy over the full temperature range Compatible with Type II or Type III compensation networks Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Wide voltage supply range: 3.0 V to 20 V (VDD1 and VDD2) Output -3 dB bandwidth: 400 kHz typical Isolation voltage: 5 kV rms reinforced See data sheet for additional featuresADuM4190-EP supports defense and aerospace applications (ADEQ standard) Download ADuM4190-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/17602 DSCC Drawing Number

Single Gate, Adjustable Slew Rate, Isolated Gate Driver, 3 A Short-Circuit (<3 ) Features:2 A output current per output pin (<3 Ω RDSON_X) 3 A peak short-circuit current 3.3 V to 6.5 V, VDD1 4.5 V to 35 V, VDD2 Positive going threshold, UVLO at 3.3 V VDD1 Multiple positive going thresholds, UVLO options on VDD2 Grade A: 4.4 V (typical) positive going threshold, UVLO Grade B: 7.3 V (typical) positive going threshold, UVLO Grade C: 11.3 V (typical) positive going threshold, UVLO Precise timing characteristics 48 ns maximum propagation delay for falling edge CMOS input logic levels High common-mode transient immunity: >150 kV/µsHigh junction temperature operation: 125°C Default low output Selectable slew rate control Safety and regulatory approvals (pending) UL recognition per UL 1577 5 kV rms for 1 minute CSA Component Acceptance Notice 5A VDE certificate of conformity (pending) DIN V VDE V 0884-10 VIORM = 849 V peak Wide-body, 8-lead SOIC_IC

11 A High Voltage Isolated Bipolar Gate Driver with Fault Detection, Miller Clamp Features: 11 A short-circuit source current (0 Ω gate resistance) 9 A short-circuit sink current (0 Ω gate resistance) 4.61 A peak current (2 Ω gate resistance) Output power device resistance: <1 Ω Output voltage range up to 30 V Multiple UVLO options on VDD2 Grade A: 14.5 V (typical) UVLO on VDD2 positive going threshold Grade B and Grade C: 11.5 V (typical) UVLO on VDD2 positive going threshold VDD1 input voltage range from 2.5 V to 6 V Desaturation protection Soft shutdown on desaturation fault Multiple desaturation detect comparator voltages Grade B: 9.2 V (typical) Grade A and Grade C: 3.5 V (typical) Miller clamp output with gate sense input Isolated fault and ready functions Low propagation delay: 75 ns (typical) Operating temperature range: −40°C to +125°C Creepage distance: 8.3 mm minimum CMTI: 100 kV/μs Safety and regulatory approvals (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-11 VIORM = 2150 V peak