High Efficiency Battery Charger/USB Power Manager Features: Switching Regulator Makes Optimal Use of Limited Power Available from USB Port to Charge Battery  and Power Application 180mΩ Internal Ideal Diode Plus Optional External Ideal Diode Controller Seamlessly Provides Low  Loss Power Path When Input Power is Limited or  Unavailable Full Featured Li-Ion/Polymer Battery Charger VBUS Operating Range: 4.25V to 5.5V (7V Absolute  Maximum—Transient) 1.2A Maximum Input Current Limit 1.5A Maximum Charge Current with Thermal Limiting Bat-Track Adaptive Output Control Slew Control Reduces Switching EMI Low Profile (0.75mm) 14-Lead 4mm × 3mm DFN Package

Li-Ion Battery Charger Termination Controllers Features: Built-In Termination: 3-Hour Time-Out C/10 Detection with Status Indicator Trickle Charge Preconditioning If Cell <2.7V Charging Enabled When 0°C < T < 50°C Automatic Charger Present Detection Automatic Battery Present Detection 1- or 2-Cell, 4.1V/Cell or 4.2V/Cell Options Precision Internal 0.2% Voltage Feedback Divider Compatible with LT1505/LT1510/LT1511/LT1512/LT1513/LT1769 Small Footprint/Low Profile

Li-Ion Battery Charger Termination Controllers Features: Built-In Termination: 3-Hour Time-Out C/10 Detection with Status Indicator Trickle Charge Preconditioning If Cell <2.7V Charging Enabled When 0°C < T < 50°C Automatic Charger Present Detection Automatic Battery Present Detection 1- or 2-Cell, 4.1V/Cell or 4.2V/Cell Options Precision Internal 0.2% Voltage Feedback Divider Compatible with LT1505/LT1510/LT1511/LT1512/LT1513/LT1769 Small Footprint/Low Profile

Lithium-Ion Battery Pulse Chargers with Overcurrent Protection Features: Complete Pulse Charger for 1-Cell Lithium-Ion Batteries Sense Resistor Limits Maximum Current for Safety 1% Float Voltage Accuracy End-of-Charge (C/10) Detection Output Programmable Charge Termination Timer Internal 0.35 NMOS Switch No Blocking Diode Required SEL Pin to Set Either 4.1V or 4.2V/Cell (LTC1730-4) Low-Battery Drain (1µA Max) when Input Supply Is Removed Battery Temperature Sensing and Charge Qualification Automatic Trickle Charge for Low-Battery Cell Automatic Battery Refresh

Dual Smart Battery System Manager Features: SMBus Charger/Selector for Two Smart Batteries* Voltage and Current Accuracy within 0.2% of Value Reported by Battery Simplifies Construction of “Smart Battery System Manager” Includes All SMBus Charger V1.1 Safety Features Supports Autonomous Operation without a Host Allows Both Batteries to Discharge Simultaneously into Single Load with Low Loss (Ideal Diode) SMBus Switching for Dual Batteries with Alarm Monitoring for Charging Battery at All Times Pin Programmable Limits for Maximum Charge Current and Voltage Improve Safety Fast Autonomous Power Path™ Switching (<10µs) Low Loss Simultaneous Charging of Two Batteries >95% Efficient Synchronous Buck Charger AC Adapter Current Limiting* Maximizes Charge Rate SMBus Accelerator Improves SMBus Timing** Available in 48-Lead TSSOP Package

Dual Smart Battery System Manager Features: SMBus Charger/Selector for Two Smart Batteries* Voltage and Current Accuracy within 0.2% of Value Reported by Battery Simplifies Construction of “Smart Battery System Manager” Includes All SMBus Charger V1.1 Safety Features Supports Autonomous Operation without a Host Allows Both Batteries to Discharge Simultaneously into Single Load with Low Loss (Ideal Diode) SMBus Switching for Dual Batteries with Alarm Monitoring for Charging Battery at All Times Pin Programmable Limits for Maximum Charge Current and Voltage Improve Safety Fast Autonomous Power Path™ Switching (<10µs) Low Loss Simultaneous Charging of Two Batteries >95% Efficient Synchronous Buck Charger AC Adapter Current Limiting* Maximizes Charge Rate SMBus Accelerator Improves SMBus Timing** Available in 48-Lead TSSOP Package

Backup Battery Controller with Fixed Output Features: Not Recommended For New Designs. Contact Analog Devices for Potential Replacement. Complete Battery Backup System in an SO-8, 16-Pin GN or SO Package Generates Fixed Backup Voltage (3.07V/4.63V) from a Single 1.2V NiCd Button Cell Automatic Main Supply to Backup Switching Minimum 100mW Output Power Automatic Fast Recharge of NiCd Battery Programmable NiCd Trickle Charge Current Smart NiCd Charger Minimizes Recharge Time and Maximizes System Efficiency After Backup Onboard Power-Up and Push-Button Reset Generator Performs VCC Supervisory Functions Reset Assertion Guaranteed at VCC = 1V Short-Circuit Protection Thermal Limiting

Backup Battery Controller with Fixed Output Features: Not Recommended For New Designs. Contact Analog Devices for Potential Replacement. Complete Battery Backup System in an SO-8, 16-Pin GN or SO Package Generates Fixed Backup Voltage (3.07V/4.63V) from a Single 1.2V NiCd Button Cell Automatic Main Supply to Backup Switching Minimum 100mW Output Power Automatic Fast Recharge of NiCd Battery Programmable NiCd Trickle Charge Current Smart NiCd Charger Minimizes Recharge Time and Maximizes System Efficiency After Backup Onboard Power-Up and Push-Button Reset Generator Performs VCC Supervisory Functions Reset Assertion Guaranteed at VCC = 1V Short-Circuit Protection Thermal Limiting

Backup Battery Controller with Fixed Output Features: Not Recommended For New Designs. Contact Analog Devices for Potential Replacement. Complete Battery Backup System in an SO-8, 16-Pin GN or SO Package Generates Fixed Backup Voltage (3.07V/4.63V) from a Single 1.2V NiCd Button Cell Automatic Main Supply to Backup Switching Minimum 100mW Output Power Automatic Fast Recharge of NiCd Battery Programmable NiCd Trickle Charge Current Smart NiCd Charger Minimizes Recharge Time and Maximizes System Efficiency After Backup Onboard Power-Up and Push-Button Reset Generator Performs VCC Supervisory Functions Reset Assertion Guaranteed at VCC = 1V Short-Circuit Protection Thermal Limiting

Microprocessor-Controlled Battery Management System Features: Fast Charge Nickel-Cadmium, Nickel-Metal-Hydride, Lithium Ion or Lead-Acid Batteries under µP Control Flexible Current Regulation: Programmable 111kHz PWM Current Regulator with Built-In PFET Driver PFET Current Gating Discharge Mode Measures Battery Voltage, Battery Temperature and Ambient Temperature with Internal 10-Bit ADC Battery Voltage, Temperature and Charge Time Fault Protection Built-In Voltage Regulator and Programmable Battery Attenuator Easy-to-Use 3- or 4-Wire Serial µP Interface Accurate Gas Gauge Function Wide Supply Range: VDD = 4.5V to 16V Can Charge Batteries with Voltages Greater Than VDD Can Charge Batteries from Charging Supplies Greater Than VDD Digital Input Pins Are High Impedance in Shutdown Mode