Constant-Voltage/Constant-Current Battery Charger Features: Charges NiCd, NiMH and Lithium-Ion Batteries - Only One 1/10W Resistor Is Needed to Program Charging Current High Efficiency Current Mode PWM with 1.5A Internal Switch and Sense Resistor 3% Typical Charging Current Accuracy Precision 0.5% Voltage Reference for Voltage Mode Charging or Overvoltage Protection Current Sensing Can Be at Either Terminal of the Battery Low Reverse Battery Drain Current: 3µA Charging Current Soft Start Shutdown Control 500kHz Version Uses Small Inductor

Constant-Voltage/Constant-Current Battery Charger Features: Charges NiCd, NiMH and Lithium-Ion Batteries - Only One 1/10W Resistor Is Needed to Program Charging Current High Efficiency Current Mode PWM with 1.5A Internal Switch and Sense Resistor 3% Typical Charging Current Accuracy Precision 0.5% Voltage Reference for Voltage Mode Charging or Overvoltage Protection Current Sensing Can Be at Either Terminal of the Battery Low Reverse Battery Drain Current: 3µA Charging Current Soft Start Shutdown Control 500kHz Version Uses Small Inductor

SEPIC Constant- or Programmable-Current/Constant-Voltage Battery Charger Features: Charger Input Voltage May Be Higher, Equal to or Lower Than Battery Voltage Charges Any Number of Cells Up to 20V 1% Voltage Accuracy for Rechargeable Lithium Batteries 100mV Current Sense Voltage for High Efficiency (LT1513) 0mV Current Sense Voltage for Easy Current Programming (LT1513-2) Battery Can Be Directly Grounded 500kHz Switching Frequency Minimizes Inductor Size Charging Current Easily Programmable or Shut Down

Battery Management Multicell Battery Stack Monitor with Daisy Chain isoSPI Interface

Battery Management 4A, High Efficiency Li-Ion Charger

Microprocessor-Controlled Battery Management System Features: Fast Charge Nickel-Cadmium, Nickel-Metal-Hydride, Lithium Ion or Lead-Acid Batteries under µP Control Flexible Current Regulation: Programmable 111kHz PWM Current Regulator with Built-In PFET Driver PFET Current Gating Discharge Mode Measures Battery Voltage, Battery Temperature and Ambient Temperature with Internal 10-Bit ADC Battery Voltage, Temperature and Charge Time Fault Protection Built-In Voltage Regulator and Programmable Battery Attenuator Easy-to-Use 3- or 4-Wire Serial µP Interface Accurate Gas Gauge Function Wide Supply Range: VDD = 4.5V to 16V Can Charge Batteries with Voltages Greater Than VDD Can Charge Batteries from Charging Supplies Greater Than VDD Digital Input Pins Are High Impedance in Shutdown Mode

Power Tracking 2A Battery Charger Features: Input Supply Voltage Regulation Loop for Peak Power Tracking in (MPPT) Solar Applications Wide Input Voltage Range: 4.95V to 34V (40V Abs Max) Programmable Charge Rate Up to 2A User Selectable Termination: C/10 or On-Board Termination Timer Resistor Programmable Float Voltage Up to 18V Accommodates 4-Cell Li-Ion/Polymer, 5-Cell LiFePO4, Lead-Acid Chemistries Parallelable for Higher Output Current 1MHz Fixed Frequency 0.5% Float Voltage Reference Accuracy 5% Charge Current Accuracy 2.5% C/10 Detection Accuracy Binary-Coded Open-Collector Status Pins Thermally Enhanced 3mm × 3mm DFN and MSE Packages

Power Tracking 2A Battery Charger Features: Input Supply Voltage Regulation Loop for Peak Power Tracking in (MPPT) Solar Applications Wide Input Voltage Range: 4.95V to 34V (40V Abs Max) Programmable Charge Rate Up to 2A User Selectable Termination: C/10 or On-Board Termination Timer Resistor Programmable Float Voltage Up to 18V Accommodates 4-Cell Li-Ion/Polymer, 5-Cell LiFePO4, Lead-Acid Chemistries Parallelable for Higher Output Current 1MHz Fixed Frequency 0.5% Float Voltage Reference Accuracy 5% Charge Current Accuracy 2.5% C/10 Detection Accuracy Binary-Coded Open-Collector Status Pins Thermally Enhanced 3mm × 3mm DFN and MSE Packages

Smart Battery Charger Features: Single Chip Smart Battery Charger Controller 100% Compliant (Rev 1.0) SMBus Support Allows for Operation with or without Host SMBus Accelerator Improves SMBus Timing Hardware Interrupt and SMBAlert Response Eliminate Interrupt Polling High Efficiency Synchronous Buck Charger 0.5V Dropout Voltage; Maximum Duty Cycle > 99.5% AC Adapter Current Limit Maximizes Charge Rate* 1% Voltage Accuracy; 5% Current Accuracy Up to 8A Charging Current Capability Dual 10-Bit DACs for Charger Voltage and Current Programming User-Selectable Overvoltage and Overcurrent Limits High Noise Immunity Thermistor Sensor Small 36-Lead Narrow (0.209 Inches) SSOP Package

32V, 2A Module (Power Module) Li-Ion/Polymer Battery Charger Features: Wide Input Voltage Range: 4.95V to 32V (40V Absolute Maximum) Float Voltage Options: 1-Cell: 4.1V, 4.2V 2-Cell: 8.2V, 8.4V Programmable Charge Current: Up to 2A User-Selectable Charge Termination: C/10 or Onboard Termination Timer Dynamic Charge Rate Programming/Soft-Start Pin Programmable Input Current Limit Optional Reverse Input Protection NTC Resistor Temperature Monitor 0.5% Float Voltage Accuracy Bad-Battery Detection with Auto-Reset Tiny, Low Profile (9mm × 15mm × 4.32mm) Surface Mount LGA Package