The DS1747 is a full-function, year-2000-compliant (Y2KC), real-time clock/calendar (RTC) and 512k x 8 nonvolatile static RAM. User access to all registers within the DS1747 is accomplished with a byte-wide interface as shown in Figure 1. The RTC information and control bits reside in the eight uppermost RAM locations. The RTC registers contain century, year, month, date, day, hours, minutes, and seconds data in 24-hour binary-coded decimal (BCD) format. Corrections for the date of each month and leap year are made automatically. The RTC clock registers are double buffered to avoid access of incorrect data that can occur during clock update cycles. The double-buffered system also prevents time loss as the timekeeping countdown continues unabated by access to time register data. The DS1747 also contains its own power-fail circuitry that deselects the device when the VCC supply is in an out-of-tolerance condition. This feature prevents loss of data from unpredictable system operation brought on by low VCC as errant access and update cycles are avoided.

The DS17285, DS17485, DS17885, DS17287, DS17487, and DS17887 real-time clocks (RTCs) are designed to be successors to the industry-standard DS12885 and DS12887. The DS17285, DS17485, and DS17885 (hereafter referred to as the DS17x85) provide a real-time clock/calendar, one time-of-day alarm, three maskable interrupts with a common interrupt output, a programmable square wave, and 114 bytes of battery-backed NV SRAM. The DS17x85 also incorporates a number of enhanced functions including a silicon serial number, power-on/off control circuitry, and 2K, 4K, or 8Kbytes of battery-backed NV SRAM. The DS17287, DS17487, and DS17887 (hereafter referred to as the DS17x87) integrate a quartz crystal and lithium energy source into a 24-pin encapsulated DIP package. The DS17x85 and DS17x87 power-control circuitry allows the system to be poweredon by an external stimulus such as a keyboard or by a time-and-date (wake-up) alarm. The active-low PWR output pin is triggered by one or either of these events, and is used to turn on an external power supply. The active-low PWR pin is under software control, so that when a task is complete, the system power can then be shut down.For all devices, the date at the end of the month is automatically adjusted for months with fewer than 31 days, including correction for leap years. It also operates in either 24-hour or 12-hour format with an AM/PM indicator. A precision temperature-compensated circuit monitors the status of VCC. If a primary power failure is detected, the device automatically switches to a backup supply. A lithium coin cell battery can be connected to the VBAT input pin on the DS17x85 to maintain time and date operation when primary power is absent. The DS17x85 and DS17x87 include a VBAUX input used to power auxiliary functions such as active-low PWR control. The device is accessed through a multiplexed byte-wide interface.ApplicationsEmbedded SystemsNetwork Hubs, Bridges, and RoutersSecurity SystemsUtility Meters

The DS17285, DS17485, DS17885, DS17287, DS17487, and DS17887 real-time clocks (RTCs) are designed to be successors to the industry-standard DS12885 and DS12887. The DS17285, DS17485, and DS17885 (hereafter referred to as the DS17x85) provide a real-time clock/calendar, one time-of-day alarm, three maskable interrupts with a common interrupt output, a programmable square wave, and 114 bytes of battery-backed NV SRAM. The DS17x85 also incorporates a number of enhanced functions including a silicon serial number, power-on/off control circuitry, and 2K, 4K, or 8Kbytes of battery-backed NV SRAM. The DS17287, DS17487, and DS17887 (hereafter referred to as the DS17x87) integrate a quartz crystal and lithium energy source into a 24-pin encapsulated DIP package. The DS17x85 and DS17x87 power-control circuitry allows the system to be poweredon by an external stimulus such as a keyboard or by a time-and-date (wake-up) alarm. The active-low PWR output pin is triggered by one or either of these events, and is used to turn on an external power supply. The active-low PWR pin is under software control, so that when a task is complete, the system power can then be shut down.For all devices, the date at the end of the month is automatically adjusted for months with fewer than 31 days, including correction for leap years. It also operates in either 24-hour or 12-hour format with an AM/PM indicator. A precision temperature-compensated circuit monitors the status of VCC. If a primary power failure is detected, the device automatically switches to a backup supply. A lithium coin cell battery can be connected to the VBAT input pin on the DS17x85 to maintain time and date operation when primary power is absent. The DS17x85 and DS17x87 include a VBAUX input used to power auxiliary functions such as active-low PWR control. The device is accessed through a multiplexed byte-wide interface.ApplicationsEmbedded SystemsNetwork Hubs, Bridges, and RoutersSecurity SystemsUtility Meters

The MAX9310A is a fast, low-skew 1:5 differential driver with selectable LVPECL inputs and LVDS outputs, designed for clock distribution applications. This device features an ultra-low propagation delay of 340ps with 48mA of supply current.The MAX9310A operates from a 3V to 3.6V power supply for use in 3.3V systems. A 2:1 input multiplexer is used to select one of two differential inputs. The input selection is controlled through the CLKSEL pin.This device features a synchronous enable function. The MAX9310A LVPECL inputs can be driven by either a differential or single-ended signal. A VBB reference voltage output is provided for use with single-ended inputs. The device can also accept differential HSTL signals.The MAX9310A is offered in a space-saving 20-pin TSSOP package and operates over the extended temperature range from -40°C to +85°C.ApplicationsAutomated Test Equipment (ATE)Central Office Backplane Clock DistributionData and Clock Driver and BufferDSLAMWireless Base Stations

The MAX9320B low-skew, 1-to-2 differential driver is designed for clock and data distribution. The input is reproduced at two differential outputs. The differential input can be adapted to accept single-ended inputs by applying an external reference voltage.The MAX9320B features ultra-low propagation delay (208ps), part-to-part skew (20ps), and output-to-output skew (6ps) with 30mA maximum supply current, making this device ideal for clock distribution. For interfacing to differential PECL and LVPECL signals, this device operates over a +3.0V to +5.5V supply range, allowing high-performance clock or data distribution in systems with a nominal 3.3V or 5V supply. For differential ECL and LVECL operation, this device operates from a -3.0V to -5.5V supply.The MAX9320B is offered in industry-standard 8-pin TSSOP and SO packages.ApplicationsLow-Jitter Data RepeaterPrecision Clock DistributionProtection Switching

Timers & Support Products 8-Bit Binary, Programmable, RC Timer Cou

The ADF4368 is a high performance, ultralow jitter, integer-N and fractional-N phase-locked loop (PLL) with integrated VCO ideally suited for frequency conversion applications.The high performance PLL has a figure of merit of -239dBc/Hz, very low 1/f Noise of normalized -287dBc/Hz and high PFD frequency that can achieve ultralow in-band noise and integrated jitter. The ADF4368 can generate any frequency from 800 MHz to 12.8 GHz without an internal doubler, thereby eliminating the need for sub-harmonic filters. Σ-Δ modulator includes a 25-bit fixed modulus which allows hertz frequency resolution and an additional 24-bit variable modulus which allows even finer resolution and flexibility for frequency planning. 9 dBm output power at 12.8 GHz in single ended configuration with 16 step power adjust feature makes it very useful for any application.For multiple frequency conversion applications such as phase array radar or massive MIMO systems, the outputs of multiple ADF4368 can be aligned by using SYNC input or EZSync. EZSync method is used when it is difficult to distribute the SYNC signal to all parts precisely. For applications that require deterministic delay or delay adjustment capability, a programmable reference to output delay with The simplicity of the ADF4368 block diagram eases development time with a simplified SPI register map, external SYNC input and repeatable multi-chip phase alignment both in integer and fractional mode.APPLICATIONSWireless infrastructure (MC-GSM, 5G)Test and MeasurementAerospace and Defense

Timers 22MM DLY MAKE 110 220VAC 5 TO 1 SEC

The Maxim ICM7555 and ICM7556 are respectively singleand dual general-purpose RC timers capable of generatingaccurate time delays or frequencies. The primaryfeature is an extremely low supply current, making thisdevice ideal for battery-powered systems. Additional featuresinclude low THRESHOLD, active-low TRIGGER, and active-low RESETcurrents, a wide operating supply voltage range, andimproved performance at high frequencies.These CMOS low-power devices offer significant performanceadvantages over the standard 555 and 556 bipolartimers. Low-power consumption, combined with the virtuallynonexistent current spike during output transitions, makethese timers the optimal solution in many applications.ApplicationsMissing Pulse DetectorPrecision TimingPulse GeneratorPulse Position ModulationPulse-Width ModulationSequential TimingTime Delay Generation

The Maxim ICM7555 and ICM7556 are respectively singleand dual general-purpose RC timers capable of generatingaccurate time delays or frequencies. The primaryfeature is an extremely low supply current, making thisdevice ideal for battery-powered systems. Additional featuresinclude low THRESHOLD, active-low TRIGGER, and active-low RESETcurrents, a wide operating supply voltage range, andimproved performance at high frequencies.These CMOS low-power devices offer significant performanceadvantages over the standard 555 and 556 bipolartimers. Low-power consumption, combined with the virtuallynonexistent current spike during output transitions, makethese timers the optimal solution in many applications.ApplicationsMissing Pulse DetectorPrecision TimingPulse GeneratorPulse Position ModulationPulse-Width ModulationSequential TimingTime Delay Generation