The LTC1662 is an ultralow power, fully buffered voltage output, dual 10-bit digital-to-analog converter (DAC). Each DAC channel draws just 1.7?A (typ) total supply-plus-reference operating current, yet is capable of supplying DC output currents in excess of 1mA and reliably driving capacitive loads of up to 1000pF. A programmable Sleep mode further reduces total operating current to 0.05?A. Linear Technology?s proprietary, inherently monotonic architecture provides excellent linearity and an exceptionally small external form factor. The double-buffered input logic provides simultaneous update capability and can be used to write to the DACs without interrupting Sleep mode. With its tiny operating current and exceptionally small size, the LTC1662 is ideal for use in the most power-constrained products. For most designs, there is no perceptible impact on the power budget; the LTC1662 draws many times less current than even a trimpot, while providing buffered, low impedance (0.5? typical, VCC = 5V) rail-to-rail outputs. The LTC1662 is pin and software compatible with the LTC1661 dual, 60?A 10-bit DAC. It is available in 8-pin MSOP and PDIP packages and is specified over the industrial temperature range.Applications Mobile Communications Portable Battery-Powered Instruments Remote or Inaccessible Adjustments Digitally Controlled Amplifiers and Attenuators Factory or Field Calibration

The 8-bit LTC1665 and 10-bit LTC1660 integrate eight accurate, serially addressable digital-to-analog converters (DACs) in tiny 16-pin narrow SSOP packages. Each buffered DAC draws just 56?A total supply current, yet is capable of supplying DC output currents in excess of 5mA and reliably driving capacitive loads to 1000pF. Sleep mode further reduces total supply current to 1?A.Proprietary, inherently monotonic voltage interpolation architecture provides excellent linearity while allowing for an exceptionally small external form factor.Ultralow supply current, power-saving Sleep mode and extremely compact size make the LTC1665 and LTC1660 ideal for battery-powered applications, while their ease of use, high performance and wide supply range make them excellent choices as general purpose converters.Applications Mobile Communications Remote Industrial Devices Automatic Calibration for Manufacturing Portable Battery-Powered Instruments Trim/Adjust Applications

The LTC1664 integrates four accurate, serially addressable 10-bit digital-to-analog converters (DACs) in a tiny 16-pin Narrow SSOP package. Each buffered DAC draws just 59?A total supply current, yet is capable of supplying DC output currents in excess of 5mA and reliably driving capacitive loads of up to 1000pF. Sleep mode further reduces total supply current to 1?A.Proprietary, inherently monotonic voltage interpolation architecture provides excellent linearity while allowing for an exceptionally small external form factor.Ultralow supply current, power-saving Sleep mode and extremely compact size make the LTC1664 ideal for battery-powered applications, while its ease of use, high performance and wide supply range make it an excellent choice as a general-purpose converter.Applications Mobile Communications Remote Industrial Devices Automatic Calibration for Manufacturing Portable Battery-Powered Instruments Trim/Adjust Applications

The LTC2688 is a 16-channel,16-bit, ?15 V digital-to-analog converter (DAC) with an integrated precision reference. The LTC2688 is guaranteed monotonic and has built in rail-to-rail output buffers that can source or sink up to 20 mA. This SoftSpan? DAC offers five output ranges up to ?15 V. The range of each channel is independently programmable.The internal 4.096 V precision reference sets the accuracy of the output voltage. An external reference can be used for additional range options. Three toggle pins support Input Register A and Input Register B toggle or sinusoidal dither at multiple frequencies. An analog multiplexer simplifies measurement of pin voltages, load currents, and junction temperature.Programmable offset and gain registers improve the accuracy of the DAC outputs.The serial peripheral interface (SPI) and MICROWIRE?-compatible, 3-wire serial interface operates on logic levels as low as 1.71 V and clock rates up to 50 MHz.APPLICATIONSOptical networkingInstrumentationData acquisitionAutomatic test equipmentProcess control and industrial automation

DC382A: Demo Board for LTC2415 24-Bit No Latency Delta Sigma ADC with Differential Input and Differential Reference.

DC427B-B: Demo Board for the LTC1967 Precision Extended Bandwidth, RMS-to-DC Converter.

DC427B-C: Demo Board for the LTC1968 Precision Wide Bandwidth, RMS-to-DC Converter.

ADC 8BIT 3MSPS TSOT-6; Resolution (Bits):8bit; Sampling Rate:3MSPS; Supply Voltage Type:Single; Supply Voltage Min:2.35V; Supply Voltage Max:3.6V; ADC / DAC Case Style:TSOT; No. of Pins:6Pins; Input Channel Type:Single Ended; Data Interface:Microwire QSPI SPI; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:Single 8-Bit SAR ADCs; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

2.5 V to 5.5 V, 500 A Quad Voltage Output 12-Bit DAC in 10-Lead Packages Features: 4 buffered 12-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±16 LSB INL, B Version: ±10 LSB INL Low power operation: 500μA @ 3V, 600μA @ 5V 2.5V to 5.5V power supply Guaranteed monotonic by design over all codes Power-down to 80nA @ 3V, 200nA @ 5V Double-buffered input logic Output range: 0V to VREF Power-on reset to 0V See data sheet for additional featuresAD5324-EP supports defense and aerospace applications (AQEC standard) Download AD5324-EP Data Sheet (pdf) Military temperature range  (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12628 DSCC Drawing Number

16-Bit, 2.5 MHz/5 MHz/10 MHz, 30 MSPS to 160 MSPS Dual Continuous Time Sigma-Delta ADC Features: SNR: 83 dB (85 dBFS) to 10 MHz input SFDR: 87 dBc to 10 MHz input Noise figure: 15 dB Input impedance: 1 kΩ Power: 600 mW 1.8 V analog supply operation 1.8 V to 3.3 V output supply Selectable bandwidth 2.5 MHz/5 MHz/10 MHz real 5 MHz/10 MHz/20 MHz complex Output data rate: 30 MSPS to 160 MSPS See data sheet for additional features