Data Conversion IC Development Tools LTC2273CUJ 16-bit, 80Msps Serial ADC, 70MHz < Ain < 140MHz, req. DC890

Dual, 16-Bit, 666ksps/ch Differential SoftSpan ADC with Wide Input Common Mode Range Features: 666ksps per Channel Throughput Two Simultaneous Sampling Channels ±1.25LSB INL (Maximum) Guaranteed 16-Bit, No Missing Codes Differential, Wide Common Mode Range Inputs Per-Channel SoftSpan Input Ranges: ±4.096V, 0V to 4.096V, ±2.048V, 0V to 2.048V ±5V, 0V to 5V, ±2.5V, 0V to 2.5V 93.4dB Single-Conversion SNR (Typical) −114dB THD (Typical) at fIN = 2kHz 105dB CMRR (Typical) at fIN = 200Hz Rail-to-Rail Input Overdrive Tolerance Guaranteed Operation to 125°C Integrated Reference and Buffer (4.096V) SPI CMOS (1.8V to 5V) and LVDS Serial I/O Internal Conversion Clock, No Cycle Latency 74mW Power Dissipation (Typical) 32-Lead (5mm × 5mm) QFN Package

CMOS 12-Bit Buffered Multiplying DAC With Onboard Data Latches Features: 12-Bit Resolution Low Gain TC: 2ppm/°C typ Fast TTL Compatible Data Latches Small 20-Lead 0.3" DIP and 20-Terminal Surface Mount Packages Single +5 V to +15 V Supply Latch Free (Schottky Protection Diode not Required) Low Cost Ideal for Battery Operated Equipment

LC2CMOS, Quad 8-Bit Voltage Output DAC Features: Four 8-Bit DACs with Output Amplifiers Skinny 20-Lead DIP, SOIC, SSOP, and PLCC Packages Microprocessor-Compatible TTL/CMOS-Compatible No User Trims Extended Temperature Range Operation Single Supply Operation Possible

Complete 12-Bit, 100 kHz, Sampling ADC (AD7870/AD7870A) Features: Complete Monolithic 12-Bit ADC with: 2 µs Track/Hold Amplifier 8 µs A/D Converter On-Chip Reference Laser-Trimmed Clock Parallel, Byte and Serial Digital Interface 57 ns Data Access Time 72 dB SNR at 10 kHz Input Frequency (AD7870, AD7875) Low Power: –60 mW typ Variety of Input Ranges: ±3 V for AD7870 0 V to +5 V for AD7875 ±10 V for AD7876

Variable Resolution Resolver-to-Digital Converter Features: Tracking R/D Converter High Accuracy Velocity Output High Max Tracking Rate 1040 RPS (10 Bits) 44-Lead PLCC Package 10-, 12-, 14-, or 16-Bit Resolution Set by User Ratiometric Conversion Stabilized Velocity Reference Dynamic Performance Set by User Industrial Temperature Range

18-Bit, 2 MSPS/1 MSPS/500 kSPS, Precision, Pseudo Differential, SAR ADCs Features: Easy Drive Greatly reduced input kickback Input current reduced to 0.5 μA/MSPS Enhanced acquisition phase, ≥79% of cycle time at 1 MSPS First conversion accurate, no latency or pipeline delay Input span compression for single-supply operation Fast conversion allows low SPI clock rates Input overvoltage clamp protection sinks up to 50 mA SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface High performance Pseudo differential analog input range 0 V to VREF with VREF from 2.4 V to 5.1 V Throughput: 2 MSPS/1 MSPS/500 kSPS options INL: ±3.2 LSB maximum Guaranteed 18-bit, no missing codes SNR: 95 dB at fIN = 1 kHz at VREF = 5 V THD: −125 dB at fIN = 1 kHz, −108 dB at fIN = 100 kHz SINAD: 84.5 dB at fIN = 1 MHz (see Figure 17 in data sheet) Oversampled dynamic range 98 dB for OSR = 2 125 dB for OSR = 1024 Low power Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface 2.5 mW at 500 kSPS (VDD only) 70 μW at 10 kSPS, 14 mW at 2 MSPS (total power) 10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP Pin compatible with AD4003/AD4007/AD4011 family Guaranteed operation: −40°C to +125°C

Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs, Open Wire Detection Features: Tested for robustness per: IEC6100-4-2, IEC6100-4-3, IEC6100-4-4, IEC6100-4-5, IEC6100-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C Open wire detection 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Internal or external clock Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

Fully Accurate 12-Bit VOUT nanoDAC SPI Interface 4.5 V to 5.5 V in a TSSOP Features: Low power dual 12-/14-/16-bit DAC, ±1 LSB INL Individual voltage reference pins Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale Power down to 400 nA at 5 V 3 power-down functions Per channel power-down Low glitch upon power-up Hardware power-down lockout capability Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-lead TSSOP