600mA Low Noise Multi-LED Camera Light Charge Pumps Features: Charge Pump Provides High Efficiency with Automatic Mode Switching Multimode Operation: 1x, 1.5x, 2x Four Low Dropout LED Outputs Up to 600mA Total Output Current Independent Torch and Flash ISET and Enable Pins Low Noise Constant Frequency Operation* PWM Brightness Control via the EN2 Pin Low Shutdown Current: 4μA Internal Soft-Start Limits Inrush Current During Start-Up and Mode Switching Open/Short LED Protection No Inductors (3mm x 3mm) 16-Lead QFN Plastic Package

400mA Single Wire Camera LED Charge Pump Features: Low Noise Constant-Frequency Operation Multi-Mode Operation: 1x or 2x Boost Mode Automatic Mode Switching High Output Current: 150mA (Continuous), 400mA (Pulsed) From Li-Ion/Polymer Input 2-Second Flash Current Timeout for LED Protection Automatic Soft-Start Output Disconnect No Inductors 220mΩ Internal High Side Current Sense Resistor Single Resistor Programming Capability Tiny Application Circuit (3mm × 2mm DFN Package, All Components < 1mm High)

High Speed, High Voltage, High Side Gate Driver Features: Wide Operating VIN Range: Up to 80V Rugged Architecture Tolerant of 100V VIN Transients Powerful 1.85Ω Driver Pull-Down (with 6V Supply) Powerful 1.1A Peak Current Driver Pull-Up (with 6V Supply) 7ns Fall Time Driving 1000pF Load 10ns Rise Time Driving 1000pF Load Drives Standard Threshold MOSFETs TTL/CMOS Compatible Inputs with Hysteresis Input Thresholds are Independent of Supply Undervoltage Lockout Thermally Enhanced 8-Lead MSOP Package

High Speed, High Voltage, High Side Gate Driver Features: Wide Operating VIN Range: Up to 60V Rugged Architecture Tolerant of 80V VIN Transients Powerful 1.85Ω Driver Pull-Down (with 6V Supply) Powerful 1.1A Peak Current Driver Pull-Up (with 6V Supply) 7ns Fall Time Driving 1000pF Load 10ns Rise Time Driving 1000pF Load Drives Standard Threshold MOSFETs TTL/CMOS Compatible Inputs with Hysteresis Input Thresholds are Independent of Supply Undervoltage Lockout Low Profile (1mm) SOT-23 (ThinSOT™) and Thermally Enhanced 8-Pin MSOP Packages

High Speed, High Voltage High Side Gate Driver Features: Wide Operating VIN Range: Up to 80V Rugged Architecture Tolerant of 100V VIN Transients Powerful 1.5Ω Driver Pull-Down Powerful 2.4A Peak Current Driver Pull-Up 7ns Fall Time Driving 1000pF Load 10ns Rise Time Driving 1000pF Load Drives Standard Threshold MOSFETs TTL/CMOS Compatible Inputs with Hysteresis Input Thresholds are Independent of Supply Undervoltage Lockout Low Profile (1mm) SOT-23 (ThinSOT)™ and Thermally Enhanced 8-Pin MSOP Packages

High Speed, High Voltage High Side Gate Driver Features: Wide Operating VIN Range: Up to 80V Rugged Architecture Tolerant of 100V VIN Transients Powerful 1.5Ω Driver Pull-Down Powerful 2.4A Peak Current Driver Pull-Up 7ns Fall Time Driving 1000pF Load 10ns Rise Time Driving 1000pF Load Drives Standard Threshold MOSFETs TTL/CMOS Compatible Inputs with Hysteresis Input Thresholds are Independent of Supply Undervoltage Lockout Low Profile (1mm) SOT-23 (ThinSOT)™ and Thermally Enhanced 8-Pin MSOP Packages

Level Shifting Hot Swappable 2-Wire Bus Buffer with Enable Features:Bidirectional Buffer* for SDA and SCL Lines Increases FanoutPrevents SDA and SCL Corruption During Live Board Insertion and Removal From BackplaneLogic Threshold ENABLE InputIsolates Input SDA and SCL Lines from OutputCompatible with I2C, I2C Fast Mode and SMBus Standards (Up to 400kHz Operation)1V Precharge on all SDA and SCL LinesSupports Clock Stretching, Arbitration and Synchronization5V to 3.3V Level TranslationHigh Impedance SDA, SCL Pins for VCC = 0V, VCC2 = 0VSmall 8-Lead DFN and MSOP Packages

Hot Swappable 2-Wire Bus Buffer with Low Voltage Level Translation Features: Level Translates 1V Signals to Standard 3.3V and 5V Logic Rails Allows Bus Pull-Up Voltages as Low as 1V on SDAIN and SCLIN Bidirectional Buffer* for SDA and SCL Lines Increases Fanout Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane Isolates Input SDA and SCL Line from Output 10kV Human Body Model ESD Protection Supports Clock Stretching, Arbitration and Synchronization High Impedance SDA, SCL Pins for VCC = 0V CS Gates Connection from Input to Output Compatible with I2C™, I2C Fast Mode and SMBus Standards (Up to 400kHz Operation) Small 8-Pin MSOP and DFN (3mm x 3mm) Packages

Hot Swappable 2-Wire Bus Buffer with Stuck Bus Recovery Features: Automatic Disconnect of SDA/SCL Lines when Bus is Stuck Low for ≥30ms Fault Flag for Stuck Bus Recovers Stuck Busses with Automatic Clocking* Bidirectional Buffer* for SDA and SCL Lines Increases Fanout Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane Allows Bus Pullup Voltages Above and Below VCC ±15kV Human Body Model ESD Protection Isolates Input SDA and SCL Lines from Output Compatible with I2C™, I2C Fast-Mode and SMBus Standards (Up to 400kHz Operation) READY Open Drain Output 1V Precharge on All SDA and SCL Lines High Impedance SDA, SCL Pins for VCC = 0V ENABLE Gates Connection from Input to Output MSOP 10-Pin and DFN (3mm × 3mm) Packages

High Definition Multimedia Interface (HDMI) Level-Shifting 2-Wire Bus Buffer Features: Bidirectional Buffer for Display Data Channel (DDC) Compliant with HDMI Specifi cation Version 1.3 DDC Capacitance Requirement Level Translation Between 3.3V and 5V ±5kV Human Body Model ESD Protection 60mV Buffer Offset Independent of Load Compatible with Non-Compliant VOL I2C Devices Isolates Input SDA and SCL Line from Output Compatible with I2C™, I2C Fast Mode and SMBus READY Open-Drain Output High Impedance SDA, SCL Pins for VCC = 0V Small 8-Lead (3mm × 3mm) DFN and 8-Lead MSOP Packages