Dual Smart Card Interface with Serial Control Features:Compatible with ISO7816-3 and EMV Electrical SpecificationsPower Management and Control for Two Smart CardsControl/Status Serial Port May Be Daisychained for Multicard ApplicationsAutomatic Shutdown on Electrical FaultsBuck/Boost Charge Pump Generates 5V, 3V or 1.8V Outputs (Smart Card Classes A, B and C)Independent 5V/3V/1.8V Level Control for Both CardsAutomatic Level TranslationSupervisory Functions Prevent Smart Card FaultsLow Operating Current: 250μA TypicalUltralow Shutdown Current>10kV ESD on Smart Card PinsSmall 32-Lead 5mm × 5mm QFN Package

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) Features: 5.7 kV rms and 1.5 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS signal levels Quad-channel configuration Any data rate up to 2.5 Gbps switching with low jitter 10 Gbps total bandwidth across four channels 2.15 ns typical propagation delay Typical jitter: 0.82 ps rms random, 40 ps total peak Lower power 1.8 V supplies ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: 100 kV/μs typical Safety and regulatory approvals (28-lead SOIC_W_FP package) UL (pending): 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK (working voltage) Enable or disable refresh (low speed output correctness check) Operating temperature range: −40°C to +125°C 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance

5 kV RMS/3.75 kV RMS, Dual LVDS Gigabit Isolator (0 Reverse Channels) Features: 5 kV rms and 3.75 kV rms LVDS isolators Complies with TIA/EIA-644-A LVDS standard Multiple dual-channel configurations Any data rate up to 1.1 Gbps switching with low jitter 4 ns typical propagation delay 2.6 ps rms typical random jitter, rms 90 ps typical peak-to-peak total jitter at 1.1 Gbps 2.5 V or 3.3 V supplies −75 dBc power supply ripple rejection, phase spur level Glitch immunity ±8 kV IEC 61000-4-2 ESD protection across isolation barrier High common-mode transient immunity: >25 kV/μs Passes EN 55022 Class B radiated emissions limits with 1.1 Gbps PRBS Safety and regulatory approvals (20-lead SOIC_W package) UL (pending): 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 424 VPEAK Fail-safe output high for open, short, and terminated input conditions (ADN4655/ADN4656) Operating temperature range: −40°C to +125°C 7.8 mm minimum creepage and clearance

Hot-Swappable I2C Isolators Features: Bidirectional I2C Communication Between Two Isolated Buses Full Isolation with Inexpensive Ethernet Transformers or Capacitors Low Voltage Level Shifting I2C Maximum Operating Frequency: 100kHz for LTC4310-1 400kHz for LTC4310-2 I2C Specification Compliant VOL, VIL ±5kV Human Body Model ESD Protection Rise Time Accelerators SDA, SCL Hot-Swapping Very Low Shutdown Current Stuck Bus Disconnect and Recovery Thermal Shutdown 10-Lead MSOP and 3mm × 3mm DFN Packages

Precision Analog Microcontroller, 12-Bit Analog Input/Output with MDIO Interface, Arm Cortex-M33 Features: Analog input/output Multichannel, 12-bit, 2 MSPS ADC Up to 12 external channels On-chip die temperature monitor 3 power monitor channels Single-ended mode 0 V to VREF analog input range Input buffers 12-bit voltage output DACs 8× 0 V to 2.5 V, 1 kΩ load 4× 0 V to 2.5 V, 2.5 kΩ load On-chip low drift voltage reference, 1.25 V or 2.5 V Buffered 1.25 V or 2.5 V output 4 voltage comparators Microcontroller 32-bit Arm Cortex-M33 core, 32-bit RISC architecture, FPU Serial wire port supports code download and debug Clocking options 16 MHz on-chip oscillator 160 MHz PLL output with programmable divider External clock source Package and temperature range 3.46 mm × 3.46 mm 64-ball WLCSP Fully specified for −40°C to +105°C operation Memory 2× 256 kB independent Flash/EE memories with ECC 10,000-cycle Flash/EE endurance 20-year Flash/EE retention 64 kB SRAM with ECC Software triggered, in circuit reprogrammability via MDIO or I2C On-chip peripherals 2× UART, 2× SPI, 3× I2C serial input/output Multilevel voltage (3.3 V, 1.8 V, 1.2 V) GPIOs MDIO slave up to 10 MHz 5 general-purpose timers Wake-up timer (WUTs) Watchdog timers (WDTs) 32-element PLA 16-bit PWM All GPIOs support external interrupt, 5 can support wake-up Power Multiple supplies: 3.3 V for voltage DACs and ADCs, and 3.3 V, 1.8 V, or 1.2 V for digital inputs/outputs Flexible operating modes for low power applications Tools Low cost quick start development system Full third-party support

Ultralow Noise, Low Power Current Amplifier Features: Ultralow noise, low power current amplifier 80 fA/√Hz (typical) noise floor 140 μA (typical) of supply current when active (EE = 0 μW/cm2) 100 nA (typical) of supply current in standby Flexible output configuration Optimized for pulsed systems Nominal linear output: 240 μA Space-saving 2 mm × 2 mm LFCSP package

Half-Duplex, iCoupler Isolated RS-485 Transceiver Features: RS-485 transceiver with electrical data isolation Complies with ANSI TIA/EIA RS-485-A and ISO 8482: 1987(E) 500 kbps data rate Slew rate-limited driver outputs Low power operation: 2.5 mA max Suitable for 5 V or 3 V operations (VDD1) High common-mode transient immunity: >25 kV/μs True fail-safe receiver inputs Chatter-free power-up/power-down protection 256 nodes on bus Thermal shutdown protection Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A IEC 60950-1 800 V rms (basic), 400V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak (reinforced) VIORM(DC) = 1500 V dc CQC certification per GB4943.1-2011 Operating temperature range: −40°C to +85°C

2.5 kV Signal Isolated, High Speed (20 Mbps), Half Duplex RS-485 Transceiver Features: Half-duplex, isolated RS-485 transceiver PROFIBUS® compliant ANSI EIA/TIA 485-A and ISO 8482: 1987(E) compliant 20 Mbps data rate 5 V or 3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs Isolated DE status output Receiver open-circuit, fail-safe design Thermal shutdown protection 50 nodes on bus Safety and regulatory approvals UL recognition—2500 Vrms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 609501 800 Vrms (basic), 400 Vrms (reinforced) VDE Certificate of Conformity DIN V VDE 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak Operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package

5.7 kV RMS Signal and Power Isolated RS-485 Transceiver with 15 kV IEC ESD Features: 5.7 kV rms isolated RS-485/RS-422 transceiver Low radiated emissions, integrated, isolated dc-to-dc converter Passes EN 55032 Class B with margin on a 2-layer PCB Cable invert smart feature Correct reversed cable connection on A, B, Y, and Z bus pins while maintaining full receiver fail-safe feature ESD protection on RS-485 A, B, Y, and Z pins 12 kV IEC61000-4-2 contact discharge 15 kV IEC61000-4-2 air discharge High speed 25 Mbps data rate (ADM2865E/ADM2867E) Low speed 500 kbps data rate for EMI control (ADM2861E/ADM2863E) Flexible power supplies Input VCC supply of 3 V to 5.5 V Logic VIO supply of 1.7 V to 5.5 V VSEL pin to select VISO supply of 5 V (VCC > 4.5 V) or 3.3 V PROFIBUS compliant for 5 V VISO Wide operating temperature range: −40°C to +105°C High common-mode transient immunity: 250 kV/μs Short-circuit, open-circuit, and floating input receiver fail-safe Supports 192 bus nodes (72 k receiver input impedance) Full hot swap support (glitch free power-up/power-down) Safety and regulatory approvals (pending) CSA Component Acceptance Notice 5A, DIN V VDE V 0884-11, UL 1577, CQC11-471543-2012, IEC 61010-1 Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E) 28-lead, fine pitch SOIC_W package (10.15 mm 10.05 mm) with >8.0 mm creepage and clearance

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC