Video ICs 3 DAC 10-bit HDTV Video Encoder

Dual Channel, 256-Position, SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: ±8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time <75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 3 mm × 3 mm package optionQualified for automotive applications

Single/Dual, +15 V/5 V, 256-Position, I2C-Compatible Digital Potentiometer Features:AD5280: 1 channelAD5282: 2 channels256 positions+10 V to +15 V single supply; 5.5 V dual-supply operationFixed terminal resistance: 20 k, 50 k, 200 kLow temperature coefficient: 30 ppm/CPower-on midscale preset1 Programmable resetOperating temperature: 40°C to +85°CI2C-compatible interface

Video ICs 10-bit 4x Oversampling SDTV Decoder

Digital Potentiometer ICs 256tap, Dual DigiPOT, NVM, SPI

Up-Down Converters

The ADV7613 is a high quality, low power, single-input HDMIto LVDS display bridge. It incorporates an HDMI capablereceiver that supports up to 1080p, 60 Hz.The HDMI port has dedicated 5 V detect and hot plug assert pins. The HDMI receiver also includes an integrated equalizer that ensures the robust operation of the interface with longcables.The ADV7613 has an audio output port for the audio dataextracted from the HDMI stream. HDMI audio formats includesuper audio CD (SACD) via Direct Stream Digital® (DSD) andHBR. The HDMI receiver has an advanced mute controller that prevents audible extraneous noise in the audio output.The ADV7613 contains a component processor (CP) that processes the video signals from the HDMI receiver. It providesfeatures such as contrast, brightness and saturation adjustments, STDI detection block, free run, and synchronization alignment controls.The LVDS encoder can package data into 6-bit or 8-bit non-dcbalanced OpenLDI mapping or 8-bit VESA mapping. TheADV7613 can output 24-bit OpenLDI data via dual-channelLVDS transmitters, up to a maximum resolution of 1080p,60 Hz received at the input. The maximum output clocksupported by a single LVDS output port is 92 MHz.The ADV7613 is offered in an automotive grade and a consumer grade. The operating temperature range is −40°C to +85°C.Fabricated in an advanced CMOS process, the ADV7613 isprovided in a 9 mm × 9 mm, 100-ball CSP_BGA, RoHS-compliant package.Applications Projectors Automotive infotainment headunits Automotive infotainment displays Digital signage

The HMC1164 is a monolithic microwave integrated circuit (MMIC), voltage controlled oscillator that integrates a resonator, a negative resistance device, and a varactor diode, and features a half frequency output.Because of the monolithic construction of the oscillator, the output power and phase noise performance are excellent over temperature.The power output is 8 dBm typical from a 5 V supply voltage. The voltage controlled oscillator is housed in a RoHS-compliant LFCSP package and requires no external matching components.APPLICATIONS Point to point and multipoint radios Test equipment and industrial controls Very small aperture terminals (VSATs)

The HMC472ALP4E are broadband 6-bit GaAs IC digital attenuators in low cost leadless surface mount packages. This single positive control line per bit digital attenuator incorporates off chip AC ground capacitors for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering DC to 3.8 GHz, the insertion loss is less than 2.0 dB typical. The attenuator bit values are 0.5 (LSB), 1, 2, 4, 8, and 16 dB for a total attenuation of 31.5 dB. Attenuation accuracy is excellent at ± 0.25 dB typical step error with an IIP3 of +54 dBm. Six TTL/CMOS control inputs are used to select each attenuation state. A single Vdd bias of +5V is required.APPLICATIONSThe HMC472ALP4E is ideal for: 3G Infrastructure & access points  Cellular/3G, LTE & UMB WiMAX, WiBN & Fixed Wireless  Test Equipment and Sensors GSM, WCDMA & TD-SCDMA

The HMC494LP3(E) is a low noise Divide-by-8 Static Divider utilizing InGaP GaAs HBT technology packaged in leadless 3×3 mm QFN surface mount plastic package. This device operates from DC (with a square wave input) to 18 GHz input frequency from a single +5V DC supply. The low additive SSB phase noise of -150 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance.APPLICATIONS Point-to-Point / Multi-Point Radios  VSAT Radios  Fiber Optic  Test Equipment  Military