The MAX5403/MAX5404/MAX5405 is a family of duallinear taper digital potentiometers. Each device has one3-terminal potentiometer and one 2-terminal variableresistor (Figure 1). The MAX5403/MAX5404/MAX5405operate from +2.7V to +5.5V single-supply voltagesand use an ultra-low supply current of 0.1µA. Thesedevices also provide glitchless switching betweenresistors taps as well as a convenient power-on reset(POR) that sets the wiper to the midscale position atpower-up. The potentiometer consists of a fixed resistorwith a wiper contact that is digitally controlled through a3-wire serial interface and has 256-tap points. It performsthe same function as a discrete potentiometer orvariable resistor.These parts are ideal for applications requiring digitallycontrolled resistors. Three resistance values are available:10kΩ (MAX5403), 50kΩ (MAX5404), and 100kΩ(MAX5405). A nominal resistor-temperature coefficientof 35ppm/°C end-to-end and 5ppm/°C ratiometric makethe MAX5403/MAX5404/MAX5405 ideal for applicationsrequiring low temperature-coefficient variable resistors,such as adjustable-gain circuit configurations.The MAX5403/MAX5404/MAX5405 are available in a 10-pin µMAX® package. Each device is guaranteed over theextended industrial temperature range (-40°C to +85°C).ApplicationsAdjustable Voltage ReferenceImpedance MatchingLCD Screen AdjustmentLow-Drift Programmable Gain Amplifier (PGA)Mechanical Potentiometer ReplacementProgrammable Filters, Delays, Time ConstantVolume Control

The MAX5413/MAX5414/MAX5415 is a family of dual linear taper digital potentiometers. Each device has two 3-terminal potentiometers. The MAX5413/MAX5414/MAX5415 operate from +2.7V to +5.5V single-supply voltages and use an ultra-low 0.1µA supply current. These devices also provide glitchless switching between resistor taps, as well as a convenient power-on reset (POR) that sets the wiper to the midscale position at power-up. Each potentiometer consists of a fixed resistor with a wiper contact that is digitally controlled through a 3-wire serial interface and has 256 tap points. It performs the same function as a discrete potentiometer or variable resistor.These parts are ideal for applications requiring digitally controlled resistors. Three resistance values are available: 10kΩ (MAX5413), 50kΩ (MAX5414), and 100kΩ (MAX5415). A nominal resistor temperature coefficient of 35ppm/°C end-to-end and 5ppm/°C ratiometric make the MAX5413/MAX5414/MAX5415 ideal for applications requiring low temperature-coefficient variable resistors, such as adjustable-gain circuit configurations.The MAX5413/MAX5414/MAX5415 are available in a 14-pin TSSOP package. Each device is guaranteed over the extended industrial temperature range (-40°C to +85°C).ApplicationsAdjustable Voltage ReferenceImpedance MatchingLCD Screen AdjustmentLow-Drift Programmable-Gain AmplifiersMechanical Potentiometer ReplacementsProgrammable Filters, Delays, Time ConstantVolume Control

The MAX5460–MAX5468 linear-taper digital potentiometersperform the same function as a mechanical potentiometeror a variable resistor. These devices consist of afixed resistor and a wiper contact with 32-tap points thatare digitally controlled through a 2-wire serial interface.The MAX5462/MAX5465/MAX5468 are configured aspotentiometers. The rest of the devices in this family areconfigured as variable resistors. See Pin Configurationsfor part functionality.Three resistance values are available: 10kΩ (MAX5466/MAX5467/MAX5468), 50kΩ (MAX5463/MAX5464/MAX5465), and 100kΩ (MAX5460/MAX5461/MAX5462).The MAX5460–MAX5465 (100kΩ and 50kΩ) are availablein space-saving 5-pin and 6-pin SC70 packages.The MAX5466/MAX5467/MAX5468 (10kΩ) are availablein 5-pin and 6-pin SOT23 packages.ApplicationsGain AdjustmentLCD Screen AdjustmentLine Impedance MatchingMechanical Potentiometer ReplacementVolume Control

The MAX4548/MAX4549 serial-interface, programmable, triple 3x2 audio/video crosspoint switches are ideal for multimedia applications. The devices include three crosspoint switch matrices, each containing three inputs and two outputs. To improve off-isolation, each switch matrix has a shunt input and each output is selectively programmable for clickless or regular-mode operation. A selectable set of internal resistive voltage dividers supplies DC bias for each output when using AC-coupled inputs. To improve crosstalk, the voltage dividers include four externally accessible bypass points.The MAX4548/MAX4549 feature 35Ω max on-resistance, 7Ω on-resistance matching between channels, 5Ω on-resistance flatness, and 0.07% total harmonic distortion (THD). Additionally, they feature off-isolation of -85dB at 20kHz and -72dB at 10MHz, with crosstalk of -85dB at 20kHz and -55dB at 10MHz. The MAX4548 uses a 2-wire I²-compatible serial interface, while the MAX4549 uses a 3-wire SPI™/QSPI™/MICROWIRE™-compatible serial interface. These parts are available in 36-pin SSOP packages and are specified for the extended (-40°C to +85°C) operating range.ApplicationsHigh-End Audio SystemsPC Multimedia BoardsSecurity SystemsSet-Top BoxesVideo Conferencing Systems

The ADuM3223/ADuM4223 are 4 A isolated, half-bridge gatedrivers that employ the Analog Devices, Inc., iCoupler® technology to provide independent and isolated high-side and low-sideoutputs. The ADuM3223 provides 3000 V rms isolation in thenarrow body, 16-lead SOIC package, and the ADuM4223 provides 5000 V rms isolation in the wide body, 16-lead SOIC package.Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to the alternatives, such as the combination of pulse transformers and gate drivers. The ADuM3223/ADuM4223 isolators each provide two independent isolated channels. They operate with an inputsupply ranging from 3.0 V to 5.5 V, providing compatibility with lower voltage systems. In comparison to gate drivers employinghigh voltage level translation methodologies, the ADuM3223/ADuM4223 offer the benefit of true, galvanic isolation between the input and each output. Each output may be continuously operated up to 537 V peak relative to the input, thereby supporting low-side switching to negative voltages. The differential voltagebetween the high-side and low-side may be as high as 800 V peak.As a result, the ADuM3223/ADuM4223 provide reliable controlover the switching characteristics of IGBT/MOSFET configurations over a wide range of positive or negative switching voltages.Applications Switching power supplies Isolated IGBT/MOSFET gate drives Industrial inverters Automotive

The MAX31180 is a low-jitter, crystal-based clock generator with an integrated phase-locked loop (PLL) to generate spread-spectrum clock outputs from 16MHz to 134MHz. The device is pin-programmable to select the clock multiplier rate as well as the dither magnitude. The MAX31180 has a spread-spectrum disable mode and a power-down mode to conserve power.ApplicationsAutomotiveCable ModemsCell PhonesComputer PeripheralsCopiersInfotainmentPCsPrinters

The MAX4936A/MAX4937A are octal, high-voltage,transmit/receive (T/R) switches. The T/R switches arebased on a diode bridge topology, and the amount ofcurrent in the diode bridges can be programmed bythree digital inputs (S0, S1, and S2). Two control inputs(EN1 and EN2) allow enabling/disabling channels 1–4and channels 5–8, respectively. The MAX4936A includesthe T/R switch and grass-clipping diodes, performingboth transmit and receive operations. The MAX4937Aincludes just the T/R switch and performs the receiveoperation only.These devices feature low on-impedance in the entireultrasound frequency range with extremely low powerdissipation of 15mW (typ) per channel.The receive path for both devices is low impedanceduring low-voltage receive and high impedance duringhigh-voltage transmit, providing protection to the receivecircuitry. The low-voltage receive path is high bandwidth,low noise, low distortion, and low jitter.The MAX4936A SWC_ pins can be driven with high-voltagesignals using the anti-parallel diodes as grassclippers while connecting the SWB_ pins to the low-noiseamplifier (LNA). Connecting SWC_ to GND allowsthe internal anti-parallel diodes to be used as clamps.Grass-clipping diodes can then be connected to SWB_and the LNA to SWA_.Both devices are available in a small, 42-pin, 3.5mm x9mm TQFN package, and are specified over the commercial0°C to +70°C temperature range.ApplicationsHigh-Voltage Transmit and Low-Voltage IsolationMedical/Industrial ImagingUltrasound

The MAX4936A/MAX4937A are octal, high-voltage,transmit/receive (T/R) switches. The T/R switches arebased on a diode bridge topology, and the amount ofcurrent in the diode bridges can be programmed bythree digital inputs (S0, S1, and S2). Two control inputs(EN1 and EN2) allow enabling/disabling channels 1–4and channels 5–8, respectively. The MAX4936A includesthe T/R switch and grass-clipping diodes, performingboth transmit and receive operations. The MAX4937Aincludes just the T/R switch and performs the receiveoperation only.These devices feature low on-impedance in the entireultrasound frequency range with extremely low powerdissipation of 15mW (typ) per channel.The receive path for both devices is low impedanceduring low-voltage receive and high impedance duringhigh-voltage transmit, providing protection to the receivecircuitry. The low-voltage receive path is high bandwidth,low noise, low distortion, and low jitter.The MAX4936A SWC_ pins can be driven with high-voltagesignals using the anti-parallel diodes as grassclippers while connecting the SWB_ pins to the low-noiseamplifier (LNA). Connecting SWC_ to GND allowsthe internal anti-parallel diodes to be used as clamps.Grass-clipping diodes can then be connected to SWB_and the LNA to SWA_.Both devices are available in a small, 42-pin, 3.5mm x9mm TQFN package, and are specified over the commercial0°C to +70°C temperature range.ApplicationsHigh-Voltage Transmit and Low-Voltage IsolationMedical/Industrial ImagingUltrasound

The MAX77501 is a high-efficiency controller driver for piezo haptic actuators and is optimized for driving up to 2µF piezo elements. It can generate a single-ended haptic waveform of up to 110VPK-PK amplitude from a 2.8V to 5.5V input power supply or a single cell Li+ battery. Memory playback and haptic waveforms real-time streaming modes are supported.A 25MHz SPI interface provides full system access and control, including fault reporting and monitoring. This allows for a rapid 600µs playback start-up time from shutdown. The on-board memory can be dynamically allocated as multiple waveforms storage or as a FIFO buffer. The IC also implements an ultra-low power boost architecture providing the lowest power consumption solution for a haptic actuator driver.Built-in undervoltage lockout (UVLO), cycle-by-cycle overcurrent limit, overvoltage and thermal shutdown protections ensure safe operation under abnormal operating conditions.The MAX77501 is available in a 30-bump, 0.4mm pitch, wafer-level package (WLP). Design Solution: Piezo Haptic Driver Extends Portables’ Battery Life ›ApplicationsSmartphones, Tablets/E-readers, Game ConsolesKeyboard, Mice, Remote Controls, and PeripheralsHaptic/Tactile Feedback Enabled Equipment

The MAX77757 is a standalone 3.15A charger with integrated USB Type-C®CC detection with JEITA compliance that supports reverse boost capability. The fast-charge current is easily configured with resistors. The MAX77757 operates with an input voltage of 4.5V to 13.7V and has a maximum input current limit of 3A. The IC also implements the adaptive input current limit (AICL) function that regulates the input voltage by reducing input current to prevent the voltage of a weak adapter from collapsing or folding back.The USB Type-C Configuration Channel (CC) detection pins on the MAX77757 enable automatic USB Type-C power source detection and input current limit configuration. To support a variety of legacy USB types as well as proprietary adapters, the IC also integrates BC1.2 detection using the D+ and D- pins. The IC runs the CC pin and BC1.2 detection automatically as soon as a USB plug is inserted without any software control.The IC also offers reverse-boost capability up to 5.1V and 1.5A, which can be enabled with the ENBST pin. The STAT pin indicates charging status while the INOKB pin indicates valid input voltage. Charging can be stopped by pulling the THM pin low.The MAX77757 is equipped with a Smart Power Selector™ and a battery true-disconnect FET to control the charging and discharging of the battery or to isolate the battery in case of a fault. The MAX77757 is offered in several variants to support Li-ion batteries with various termination voltages from 4.1V to 4.5V. It also has a 3.6V termination voltage option for LiFePO4 batteries. The IC comes in a 3mm x 3mm, 0.4mm pitch, 24-lead FC2QFN package making it suitable for low-cost PCB assembly.ApplicationsMobile Point-of-Sale (mPOS) TerminalsPortable Medical DevicesWireless HeadphonesGPS TrackersCharging Cradles for Wearable DevicesPower BanksMobile Routers