The MAX20328/MAX20328A/MAX20328B are USB Type-C audio interface ICs for use in portable devices. As USB Type-C and USB power delivery (PD) make a high-voltage charging solution readily available, the data and SBU lines are at risk of shorting to a high bus voltage, risking permanent damage to the portable device. USB 2.0 data lines also need protection when multiplexed with analog audio signals that vary from positive to negative voltages. The devices can detect a CC pin connection event to disable the microphone bias and eliminate pop up noise when an audio accessory is attached.The MAX20328/MAX20328A/MAX20328B come in a 5 x 5 array, 25-bump, 0.4mm pitch, 2.31mm x 2.31mm wafer-level package (WLP).ApplicationsPhabletsSmart PhonesTablet PCs

The MAX5160/MAX5161 linear-taper digital potentiometers perform the same function as a mechanical potentiometer or a variable resistor. They consist of a fixed resistor and a wiper contact with 32 tap points that are digitally controlled by three lines for the 8-pin MAX5160 or by two lines for the 6-pin MAX5161.These parts are ideal for applications requiring digitally controlled resistors. Three resistance values are available for each part type: 50kΩ,100kΩ, and 200kΩ. A nominal resistor temperature coefficient of 50ppm/°C end-to-end and only 5ppm/°C ratiometric makes the MAX5160 ideal for applications requiring a low-temperature-coefficient variable resistor, such as low-tempco, adjustable-gain circuit configurations.The MAX5160 is available in an 8-pin µMAX package, and the MAX5161 is available in a 6-pin SOT23 package. Both devices are guaranteed over the extended-industrial temperature range (-40°C to +85°C).ApplicationsLCD Screen AdjustmentMechanical Potentiometer ReplacementsVolume Control

The MAX5160/MAX5161 linear-taper digital potentiometers perform the same function as a mechanical potentiometer or a variable resistor. They consist of a fixed resistor and a wiper contact with 32 tap points that are digitally controlled by three lines for the 8-pin MAX5160 or by two lines for the 6-pin MAX5161.These parts are ideal for applications requiring digitally controlled resistors. Three resistance values are available for each part type: 50kΩ,100kΩ, and 200kΩ. A nominal resistor temperature coefficient of 50ppm/°C end-to-end and only 5ppm/°C ratiometric makes the MAX5160 ideal for applications requiring a low-temperature-coefficient variable resistor, such as low-tempco, adjustable-gain circuit configurations.The MAX5160 is available in an 8-pin µMAX package, and the MAX5161 is available in a 6-pin SOT23 package. Both devices are guaranteed over the extended-industrial temperature range (-40°C to +85°C).ApplicationsLCD Screen AdjustmentMechanical Potentiometer ReplacementsVolume Control

The MAX560/MAX561 are the first +3.3V-powered devices to implement the EIA/TIA-562 standard, which guarantees interoperability with RS-232 interfaces. The MAX560/MAX561 are guaranteed to operate with a +3.0V power supply at a 20kbits/sec data rate while maintaining ±3.7V EIA/TIA-562 signal levels.The MAX560/MAX561 include four line drivers, five receivers, a shutdown mode, and a receiver-enable input. An on-board charge-pump voltage converter converts the +3.3V input to the ±6.6V needed to comply with the EIA/TIA-562 output levels. The MAX560 has an active-low shutdown and an active-high receiver enable. In shutdown mode, two receivers are active, allowing unidirectional communication for peripheral monitoring. The MAX561 has an active-high shutdown and an active-low receiver enable. In shutdown mode, all receivers are in a high-impedance, three-state mode.The MAX560/MAX561 are available in a standard 28-pin wide small outline (SO) package and a 28-pin shrink small outline package (SSOP), which requires 40% of the board space of the SO package. Each operates with four 1µF capacitors, further reducing board space.

isoSPI Isolated Communications Interface Features: AEC-Q100 Qualified for Automotive Applications 1Mbps Isolated SPI Data Communications Simple Galvanic Isolation Using Standard Transformers Bidirectional Interface Over a Single Twisted Pair Supports Cable Lengths Up to 100 Meters Very Low EMI Susceptibility and Emissions Configurable for High Noise Immunity or Low Power Engineered for ISO26262 Compliant Systems Requires No Software Changes in Most SPI Systems Ultralow, 2µA Idle Current Automatic Wake-Up Detection Operating Temperature Range: –40°C to 125°C 2.7V to 5.5V Power Supply Interfaces to All Logic from 1.7V to 5.5V Available in 16-Lead QFN and MSOP Packages

48-Port IEEE802.3bt (PoE 2) PSE Digital Controller Features: Fully Compliant IEEE 802.3bt Type 3 and 4 PSE Fully Compliant IEEE 802.3at Type 2 PSE Software-Compatible with LTC4291-1/LTC4292 Up to 48 PSE Ports with One Power Channel per Port Up to 24 PSE Ports with Two Power Channels per Port ECC-Protected eFlash and Data RAMs Low Power Path Dissipation per Channel 100mΩ Sense Resistance 30mΩ or Lower MOSFET RDS(ON) Chipset Provides Electrical Isolation Eliminates Optos and Isolated 3.3V Supply Very High Reliability Multipoint PD Detection Connection Check Distinguishes Single-Signature and Dual-Signature PDs Continuous Per-Port Power and Current Monitoring 1MHz I2C Compatible Serial Control Interface Pin or I2C Programmable PD Power Available in 24-Lead 4mm × 4mm (LTC91011) and a 64-Lead 7mm × 11mm (LTC9102/LTC9103) QFN Packages

100kHz to 1GHz RF Power Detector Features: Temperature Compensated Internal Schottky Diode RF Detector Wide Input Power Range: -34dBm to 14dBm Ultra Wide Input Frequency Range: 100kHz to 1000MHz Buffered Output Wide VCC Range of 2.7V to 6V Low Operating Current: 550µA Low Shutdown Current: <2µA Low Profile (1mm) ThinSOT™ Package

Precision 300MHz to 7GHz RF Detector with Gain and Offset Adjustment Features: Temperature Compensated Internal Schottky Diode RF Detector Wide Input Frequency Range: 300MHz to 7GHz* Wide Input Power Range: –32dBm to 10dBm Buffered Detector Output with External Gain Control Precision VOUT Offset Control Low Starting Voltage: 120mV ±35mV for Gain = 2x Wide VCC Range of 2.7V to 6V Low Operating Current: 500µA Available in a Low Profile (1mm) SOT-23 Package and Tiny 6-Lead (2mm x 2mm) DFN Package

NCN26010 Series 10 Mb/s Industrial Ethernet MAC + PHY IC Controller

Telecom Interface ICs Si3050 Enhanced Global Voice DAA Line-Side - lead-free