The SSM2529 is a digital input, Class-D power amplifier that combinesa digital-to-analog converter (DAC), a low power audio specificdigital signal processor, and a sigma-delta (?-?) Class-D modulator.This unique architecture enables extremely low real-world powerconsumption from digital audio sources with excellent audioperformance. The SSM2529 is ideal for power sensitive applications,such as mobile phones and portable media players, where systemnoise can the corrupt small analog signals that are sent to ananalog input audio amplifier.Using the SSM2529, audio data can be transmitted to the amplifierover a standard digital audio serial interface, thereby significantlyreducing the effect of noise sources such as GSM interference orother digital signals on the transmitted audio. The closed-loopdigital input design retains the benefits of an all-digital amplifier, yetenables very good PSRR and audio performance. The three-level,?-? Class-D modulator is designed to provide the least amount ofEMI, the lowest quiescent power dissipation, and the highestaudio efficiency without sacrificing audio quality.The audio input is provided via a serial audio interface that can beprogrammed to accept all common audio formats, including I2S,TDM, and PDM. Control of the IC is provided via an I2C controlinterface. An alternative to I2C control is standalone operationmode, which allows several settings that are adjusted by off-chipexternal resistors. The SSM2529 can accept a variety of input MCLKfrequencies and can use BCLK as the clock source in someconfigurations. An integrated PLL can also provide the devicemaster clock.The integrated DSP includes soft digital volume control circuits; ade-emphasis, high-pass filter; a seven-band programmable equalizer;and a programmable digital dynamic range compressor. In addition,the part includes a feedforward speaker temperature predictionmodule to protect the loudspeaker.The SSM2529 supports single-supply mode, where DVDD isprovided by the on-chip LDO regulator, eliminating the need for anexternal digital core supply.The digital interface is very flexible and convenient. It can offer abetter system solution for other products whose sole audio sourceis digital, such as wireless speakers, laptop PCs, portable digitaltelevisions, and navigation systems.The SSM2529 is specified over the industrial temperature range of?40?C to +85?C. It has built-in thermal shutdown and output shortcircuitprotection. It is available in a 16-ball, 1.92 mm ? 1.94 mmwafer level chip scale package (WLCSP).Applications Mobile phones Portable media players Laptop PCs Wireless speakers Portable gaming Navigation systems

The SSM2537 is a PDM digital input Class D power amplifier that offers higher performance than existing DAC plus Class D solutions. The SSM2537 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones and portable media players.The SSM2537 combines an audio digital-to-analog converter (DAC), a power amplifier, and a PDM digital interface on a single chip. The integrated DAC plus analog ?-? modulator architecture enables extremely low real-world power consumption from digital audio sources with excellent audio performance. Using the SSM2537, audio can be transmitted digitally to the audio amplifier, significantly reducing the effect of noise sources such as GSM interference or other digital signals on the transmitted audio. The SSM2537 is capable of delivering 2.5 W of continuous output power with <1% THD + N driving a 4 ? load from a 5.0 V supply.The SSM2537 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The closed-loop, three-level modulator design retains the benefits of an all-digital amplifier, yet enables very good PSRR and audio performance. The modulation continues to provide high efficiency even at low output power and has an SNR of 103 dB PDM input. Spread-spectrum pulse density modulation is used to provide lower EMI-radiated emissions compared with other Class D architectures.The SSM2537 has a four-state gain and sample frequency selection pin that can select two different gain settings, optimized for 3.6 V and 5 V operation. This same pin also controls the internal digital filtering and clocking, which can be set for 64 ? fS or 128 ? fS input sample rates to support both 3 MHz and 6 MHz PDM clock rates.The SSM2537 has a micropower shutdown mode with a typical shutdown current of 1 ?A for both power supplies. Shutdown is enabled automatically by gating input clock and data signals. A standby mode can be entered by applying a designated PDM stop condition sequence. The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output when entering or leaving the low power state, reducing audible noises on activation and deactivation.The SSM2537 is specified over the industrial temperature range of ?40?C to +85?C. It has built-in thermal shutdown and output short-circuit protection. It is available in a 9-ball, 1.3 mm ? 1.3 mm wafer level chip scale package (WLCSP).Applications Mobile handsets

The SSM3302 is a fully integrated, high efficiency, stereo Class-D audio amplifier. The application circuit requires minimal externalcomponents and operates from a single 7 V to 18 V supply. The device is capable of delivering 2 ? 10 W of continuous output power into a 4 ? load (or 2 ? 8 W into 8 ?) with 98 dB. Spread spectrum pulse density modulation (PDM) is used toprovide lower EMI radiated emissions compared with other Class-D architectures. The SSM3302 includes an optional modulation select pin (ultralow EMI emission mode) that significantly reduces the radiated emissions at the Class-D outputs, particularly above 100 MHz. The SSM3302 can pass FCC Class-B emissions testing with an unshielded 20 inch cable using common-mode choke-based filtering.The fully differential input of the SSM3302 provides excellent rejection of common-mode noise on the input. The device also includes a highly flexible gain select pin that only requires one series resistor to choose a gain between 9 dB and 24 dB, with no change to the input impedance. The benefit of this is to improve gain matching between multiple SSM3302 devices within a single application compared with using external resistors to set gain.The SSM3302 includes an integrated voltage regulator thatgenerates a 5 V rail.The SSM3302 has a micropower shutdown mode with a typical shutdown current of 10 ?A. Shutdown is enabled by applying a logic low to the SD pin. The device also includes pop-and-click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off, reducing audible noise during activation and deactivation.Other included features to simplify system level integration of the SSM3302 are input low-pass filtering to suppress out-ofband DAC noise interference to the pulse density modulator, fixed input impedance to simplify component selection across multiple platform production builds, and a thermal warning indicator pin.The SSM3302 is specified over the commercial temperaturerange (?40?C to +85?C). It has built-in thermal shutdown andoutput short-circuit protection. It is available in a halide-free,40-lead, 6 mm ? 6 mm lead frame chip scale package (LFCSP).APPLICATIONS Mobile computing Flat panel televisions Media docking stations Portable electronics Sound bars

The SSM3525 is a fully integrated, high efficiency, mono Class D audio amplifier with digital input and digitized output of output voltage, output current, and PVDD supply. The application circuit requires few external components and can operate from 4.5 V to 17 V (PVDD) and 1.8 V (IOVDD) supplies. It is capable of delivering 8.3 W of continuous output power into an 8 ? load (or 15.3 W into 4 ?) with <1% THD + N from a 12 V supply, or 30.2 W into an 4 ? load from a 17 V power supply, all with <1% THD + N. The SSM3525 features a high efficiency, low noise modulation scheme that requires no external inductor/capacitor (LC) output filters. This scheme continues to provide high efficiency even at low output power. It operates with 92% efficiency at 9W into an 8 ? load, 12V or 89% efficiency at 20 W into 4 ? from a 17 V supply, (should now match the table)and it has an signal-to-noise ratio (SNR) of 107 dB A weighted.Spread spectrum pulse density modulation provides lower electromagnetic interference (EMI) radiated emissions compared with other Class-D architectures, particularly above 100 MHz.The digital input eliminates the need of an external digital-to-analog converter (DAC). The SSM3525 has a micropower shutdown mode with a typical shut?down current of 90 nA at 12 V PVDD supply. Individual sense blocks can be powered down to save power when sense is not needed.The device also includes pop and click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off.Current sensing is accomplished using an integrated analog-to-digital converter (ADC) and internal sense resistor. The digitized voltage and current information can be returned in various serial audio formats, including I2S, time division multiplexing (TDM) and pulse density modulation (PDM).The SSM3525 includes an integrated regulator to generate the required 5 V analog supply. Alternatively, if an external 5 V rail from a dc-to-dc converter is available, it can improve system efficiency.The SSM3525 is designed to operate with an I2C control interface and specified over the temperature range ?40?C to +85?C. It has built-in thermal shutdown and output short-circuit protection. It is available in a halide free, 23-ball, 2.26 mm ? 2.38 mm wafer-level chip scale package (WLCSP).Applications Mobile computing Portable electronics

The SSM6322 is an integrated, dual-channel audio amplifier solution that interfaces directly with audio DAC/CODEC, maximizing the fidelity of high fidelity audio signal chains. The highly efficient design of the SSM6322 delivers outstandingaudio performance while minimizing power dissipation for maximum battery life in portable applications.The SSM6322 features ?121 dB THD + N at 1 kHz, along with very low output noise from 20 Hz to 20 kHz. The low power operation, high peak output current, and high PSRR make the SSM6322 an ideal candidate for applications that require high fidelity audio, high dynamic range, precision, and low power. This highly integrated drive solution also reduces development time while reducing board space and minimizing external components.The SSM6322 is available in a 24-lead LFCSP package. The SSM6322 operates over the industrial temperature of ?40?C to +85?C.Applications High fidelity headphone driver Mobile phones Bluetooth speakers & headphones Gaming Notebooks and Tablets A/V receivers Professional audio equipment Audio test equipment Automobile infotainment system

Demonstration circuit DC675C is for the evaluation of filter circuits using an LT1568. The LT1568 is a dual 2nd order active-RCfilterbuildingblockwithprecision ±0.75% capacitors and low noise op amps with 180MHz GBW trimmed to ±10% maximum variation. The ±10% GBW variation of the LT1568 op amps allows for minimizing the higher frequency error by decreasing resistor values. The cutoff or center frequency (fC) range of an LT1568 filter is 200kHz to 10MHz (5MHz for a bandpass filter). The low limit of 200kHz was chosen only to minimize resistor noise and DC offsets (using external capacitors the fC frequency can be less than 200kHz). For testing and evaluation, the DC675C assembly is configured as a single 4th order, 500kHz narrow passband bandpass filter. For other possible LT1568 configurations, the DC675C has unused pads for 0805 surface mount resistors and capacitors preconfigured with PCB traces to allow for the following high accuracy LT1568 filter circuits: 4th order lowpass filter 5th order lowpass filter 4th order narrow passband bandpass 4th order wide passband bandpass 4th order highpass filter Refer to the LT1568 data sheet for additional information about filter circuit configurations.

The ADuC814 MicroConverter? is a fully integrated 12-bit data acquisition system-on-a-chip. Like all of ADI's MicroConverter products, it features precision A/D & D/A conversion and a Flash microcontroller on a single chip.The ADuC814 is available in a 28-pin TSSOP package and operates on a 3V or 5V power supply.

The ADuC841/ADuC842/ADuC843 are complete smart transducer front ends, that integrates a high performance self-calibrating multichannel ADC, a dual DAC, and an optimized single-cycle 20 MHz 8-bit MCU (8051 instruction set compatible)on a single chip.The ADuC841 and ADuC842 are identical with the exception of the clock oscillator circuit; the ADuC841 is clocked directly from an external crystal up to 20 MHz whereas the ADuC842 uses a 32 kHz crystal with an on-chip PLL generating a programmable core clock up to 16.78 MHz.The ADuC843 is identical to the ADuC842 except that the ADuC843 has no analog DAC outputs.The microcontroller is an optimized 8052 core offering up to 20 MIPS peak performance. Three different memory options are available offering up to 62 kBytes of nonvolatile Flash/EE program memory. Four kBytes of nonvolatile Flash/EE data memory, 256 bytes RAM, and 2 kBytes of extended RAM are also integrated on-chip. The parts also incorporate additional analog functionality with two 12-bit DACs, power supply monitor, and a band gap reference. On-chip digital peripherals include two 16-bit ?-?. DACs, a dual output 16-bit PWM, a watchdog timer, a time interval counter, three timers/counters, and three serial I/O ports (SPI, I2C, and UART).On the ADuC812 and the ADuC832, the I2C and SPI interfaces share some of the same pins. For backwards compatibility, this is also the case for the ADuC841/ADuC842/ADuC843.However, there is also the option to allow SPI operate separately on P3.3, P3.4, and P3.5, while I2C uses the standard pins. The I2C interface has also been enhanced to offer repeated start, general call, and quad addressing.On-chip factory firmware supports in-circuit serial download and debug modes (via UART) as well as single-pin emulation mode via the EA pin..Applications Optical networking?laser power control Base station systems Precision instrumentation, smart sensors Transient capture systems DAS and communications systems

The LTC1563-2/LTC1563-3 are a family of extremely easy-to-use, active RC lowpass filters with rail-to-rail inputs and outputs and low DC offset suitable for systems with a resolution of up to 16 bits. The LTC1563-2, with a single resistor value, gives a unity-gain Butterworth response. The LTC1563-3, with a single resistor value, gives a unity-gain Bessel response. The proprietary architecture of these parts allows for a simple resistor calculation:R = 10k (256kHz/fC); fC = Cutoff Frequencywhere fC is the desired cutoff frequency. For many applications,this formula is all that is needed to design a filter.By simply utilizing different valued resistors, gain andother responses are achieved.The LTC1563-X features a low power mode, for the lowerfrequency applications, where the supply current is reducedby an order of magnitude and a near zero powershutdown mode.The LTC1563-Xs are available in the narrow SSOP-16package (Same footprint as an SO-8 package).Applications Discrete RC Active Filters and Modules Antialiasing Filters Smoothing or Reconstruction Filters Linear Phase Filtering for Data Communication Phase Locked Loops

Dual-Channel, I2C Compatible, 256 Position, Digital Potentiometer Features: 256 positions 10 kΩ, 100 kΩ, 1 MΩ Low temperature coefficient: 30 ppm/°C Single-supply 2.7 V to 5.5 V or dual-supply ±2.7 V for ac or bipolar operation Internal power on midscale preset I2C-compatible interface with readback capability Extra programmable logic outputs Self contained shutdown feature Extended temperature range: −40°C to +105°C