8 Channel, 12-Bit, Configurable ADC/DAC with on-chip Reference, SPI interface Features: Download AD5592R-1-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. 8-channel, configurable ADC/DAC/GPIO Configurable as any combination of 8 × 12-bit DAC channels 8 × 12-bit ADC channels 8 × general-purpose digital input/output pins Integrated temperature sensor SPI interface Available in 16-ball, 2 mm × 2 mm WLCSP 16-lead, 3 mm × 3 mm LFCSP 16-lead TSSOP

Low Cost, Low Power, True RMS-to-DC Converter Features: Delivers true rms or average rectified value of ac waveform Fast settling at all input levels Accuracy: ±10 μV ± 0.25% of reading (B grade) Wide dynamic input range  100 μV rms to 3 V rms (8.5 V p-p) full-scale input range  Larger inputs with external scaling Wide bandwidth: 1 MHz for −3 dB (300 mV)  65 kHz for additional 1% error Zero converter dc output offset No residual switching products Specified at 300 mV rms input  Accurate conversion with crest factors up to 10  Low power: 300 μA typical at ±2.4 V  High-Z FET separately powered input buffer RIN ≥ 1012 Ω, CIN ≤ 2 pF  Precision dc output buffer  Wide power supply voltage range Dual: ±2.4 V to ±18 V; single: 4.8 V to 36 V 4 mm × 4 mm LFCSP and 8 mm × 6 mm QSOP packages ESD protected

+30 V/15 V Operation 128-Position Digital Potentiometer Features: 128 positions  10 kΩ, 50 kΩ, 100 kΩ  20 V to 30 V single-supply operation ±10 V to ±15 V dual-supply operation 3-wire SPI®-compatible serial interface  THD 0.006% typical  Programmable preset  Power shutdown: less than 1 μA  iCMOS™ process technology 

18-Bit, 15 MSPS, Module Data Acquisition Solution Features: Integrated fully differential ADC driver with signal scaling Wide input common-mode voltage range High common-mode rejection Single-ended to differential conversion Pin selectable input range with overrange Input ranges with 4.096 V REFBUF: ±10 V, ±5 V, ±4.096 V, ±2.5 V, and ±1.5 V Gain/attenuation options: 0.37, 0.73, 0.87, 1.38, and 2.25 Critical passive components 0.005% precision matched resistor array for FDA 9 mm × 9 mm, 0.8 mm pitch, 100-ball CSP_BGA package 2.5× footprint reduction vs. discrete solution Low power, dynamic power scaling, power-down mode 143 mW typical at 15 MSPS Throughput: 15 MSPS, no pipeline delay INL error: ±3.1 ppm typical, ±6.2 ppm maximum (Gain = 0.73, gain = 0.87, gain = 1.38, gain = 2.25) SINAD: 90.4 dB typical at 20 kHz (gain = 0.73) THD: −117 dB at 1 kHz, −110 dB at 100 kHz (gain = 0.73) Gain error: ±0.005%FS typical Gain error drift: ±0.13 ppm/°C typical On-board reference buffer with VCMO generation Serial LVDS interface Wide operating temperature range: −40°C to +85°C

MOTOR DRIVER, -40 TO 125DEG C;

12-BIT ADC HOT SWAP CONTROLLER;

256-/1024-Position, Digital Potentiometers with Maximum 1% R-Tolerance Error and 20-TP Memory Features: Single-channel, 256-/1024-position resolution 20 kΩ, 50 kΩ, and 100 kΩ nominal resistance Maximum ±1% nominal resistor tolerance error (resistor performance mode) 20-times programmable wiper memory Rheostat mode temperature coefficient: 35 ppm/°C Voltage divider temperature coefficient: 5 ppm/°C +9 V to +33 V single-supply operation ±9 V to ±16.5 V dual-supply operation SPI-compatible serial interface Wiper setting readback Power-on refreshed from 20-TP memory

The AD637 is a complete, high accuracy, rms-to-dc converter that computes the true rms value of any complex waveform. It offers performance that is unprecedented in integrated circuit rms-to-dc converters and comparable to discrete and modular techniques in accuracy, bandwidth, and dynamic range. The AD637 computes the true root mean square, mean square, or absolute value of any complex ac (or ac plus dc) input waveform and gives an equivalent dc output voltage. The true rms value of a waveform is more useful than an average rectified signal because it relates directly to the power of the signal. The rms value of a statistical signal relates to the standard deviation of the signal.Superior crest factor compensation permits measurements of signals with crest factors of up to 10 with less than 1% additional error. The wide bandwidth of the AD637 permits the measurement of signals up to 600 kHz with inputs of 200 mV rms and up to 8 MHz when the input levels are above 1 V rms.Direct dB value of the rms output with a range of 60 dB is available on a separate pin. An externally programmed reference current allows the user to select the 0 dB reference voltage to correspond to any level between 0.1 V and 2.0 V rms.A chip select connection on the AD637 permits the user to decrease the supply current from 2.2 mA to 350 µA during periods when the rms function is not in use. This feature facilitates the addition of precision rms measurement to remote or handheld applications where minimum power consumption is critical. In addition, when the AD637 is powered down, the output goes to a high impedance state. This allows several AD637s to be tied together to form a wideband true rms multiplexer.The input circuitry of the AD637 is protected from overload voltages in excess of the supply levels. The inputs are not damaged by input signals if the supply voltages are lost.The AD637 is laser wafer trimmed to achieve rated performance without external trimming. The only external component required is a capacitor that sets the averaging period. The value of this capacitor also determines low frequency accuracy, ripple level, and settling time.The on-chip buffer amplifier is used either as an input buffer or in an active filter configuration. The filter can be used to reduce the amount of ac ripple, thereby increasing accuracy.The AD637 is available in accuracy Grade J and Grade K for commercial temperature range (0°C to 70°C) applications, accuracy Grade A and Grade B for industrial range (−40°C to +85°C) applications, and accuracy Grade S rated over the −55°C to +125°C temperature range. All versions are available in hermetically sealed, 14-lead SBDIP, 14-lead CERDIP, and 16-lead SOIC_W packages.

The ADSD3500 is a Time-of-Flight (ToF) Depth Image Signal Processor (ISP) for Analog Devices ToF products such as the ADTF3175 and ADSD3030. The Depth ISP processes the raw phase frames from the ToF imager, generating the final radial depth, active brightness (AB), and confidence frames. The ADSD3500 supports full computation of depth, active brightness and confidence data for 640x480 resolution, and partial depth computation (pre-phase unwrap) for 1024x1024 resolution. Data and processing flow is controlled using the integrated ARM® Cortex®-M33. Computation is performed using dedicated hardware and memory, enabling a low power ToF depth ISP solution. The ADSD3500 also controls the boot-up of the image sensor module, loading of calibration data, and triggering of frames.The image data receiver (Rx) and transmitter (Tx) ports use standard Mobile Industry Processor Interface (MIPI) Camera Serial Link 2 (CSI-2) interfaces. Processor programming and operation are controlled through 4-wire QSPI, I2C, and I3C serial interfaces.The ADSD3500 is available in a 3.47mm x 3.47mm WLCSP, and is specified over an operating temperature range of -25°C to +85°C.APPLICATIONS Augmented reality (AR) systems Robotics Building automation Machine vision systems

SLI9670 Iridium add-on Board for Raspberry Pi Evaluation Board