DIGITAL POT VOLATILE 10 KOHM NSOIC-8; End To End Resistance:10kohm; No. of Pots:Single; Control Interface:Serial SPI; Track Taper:Linear; Resistance Tolerance:± 1%; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Potentiometer IC Case Style:NSOIC; No. of Pins:8Pins; No. of Steps:256; Temperature Coefficient:500ppm/°C; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:-; Automotive Qualification Standard:-; MSL:-; SVHC:No SVHC (12-Jan-2017)

750 MHz, 16 16 Analog Crosspoint Switch Features: 16 × 16 high speed, nonblocking switch array Pinout and functionally equivalent to the AD8114 / AD8115 Complete solution Buffered inputs Programmable high impedance outputs 16 output amplifiers,  G = +1 (ADV3226), G = +2 (ADV3227) Drives 150 Ω loads Operates on ±5 V supplies Low power: 1.3 W Excellent ac performance  −3 dB bandwidth, 200 mV p-p:  820 MHz (ADV3226),  750 MHz (ADV3227)  2 V p-p: 600 MHz (ADV3226),   750 MHz (ADV3227) Slew rate: 2150 V/μs (ADV3226), 2950 V/μs (ADV3227) Serial or parallel programming of switch array 100-lead LFCSP (12 mm × 12 mm)

10-Bit, Integrated, Multiformat SDTV/HDTV Video Decoder and RGB Graphics Digitizer Features: Four 10-bit ADCs sampling up to 110 MHz 6 analog input channels SCART fast blank support Internal antialias filters NTSC, PAL, SECAM color standards support 525p/625p component progressive scan support 720p/1080i component HDTV support Digitizes RGB graphics up to 1024 × 768 at 70 Hz (XGA) 3 × 3 color space conversion matrix Industrial temperature range: −40°C to +85°C 12-bit 4:4:4 DDR, 8-/10-/16-/20-bit SDR pixel output interface See data sheet for additional features

Single Channel, 1024-Position, 1% R-Tolerance Digital Potentiometer Features: Single-channel, 1024-position resolution 20 kΩ, 50 kΩ, and 100 kΩ nominal resistance Calibrated 1% nominal resistor tolerance (resistor performance mode) Rheostat mode temperature coefficient: 35 ppm/°C Voltage divider temperature coefficient: 5 ppm/°C Single-supply operation: 9 V to 33 V Dual-supply operation: ±9 V to ±16.5 V SPI-compatible serial interface Wiper setting readback

Quad-Channel, Software Configurable Input/Output Features: Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal 16-bit, Σ-ADC with optional 50 Hz and 60 Hz rejection 13-bit monotonic DACs Charge pump for true zero voltage output Internal temperature sensor, 5°C accuracy On-chip diagnostics including open circuit and short-circuit detection Robust architecture SPI Temperature range: −40°C to +85°C 64-lead LFCSP

Quad-Channel, Software Configurable Input and Output Features: Quad-channel software configurable input/output circuit Screw terminals tolerant to ±40 V dc Line protectors to block power from the screw terminals to supplies User configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal 16-bit, Σ- ADC with optional 50 Hz and 60 Hz rejection 13-bit monotonic DACs Charge pump for true zero voltage output HART-compatible Internal temperature sensor, ±5°C accuracy On-chip diagnostics including open circuit and short-circuit detection SPI-compatible Temperature range: −40°C to +105°C 64-lead LFCSP

ADC, 24BIT, LFCSP-16, -40 TO 85DEG C ROHS COMPLIANT: YES

The AD74115H is a single-channel, software-configurable, input and output device for industrial control applications. The AD74115H provides a wide range of use cases, integrated on a single chip. These use cases include analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capability. The AD74115H also has an integrated HART modem. A serial peripheral interface (SPI) is used to handle all communications to the device, including communications with the HART modem. The digital input and digital outputs can be accessed via the SPI or the general-purpose input and output (GPIO) pins to support higher speed data rates.The device features a 16-bit, Σ-Δ analog-to-digital converter (ADC) and a 14-bit digital-to-analog converter (DAC). The AD74115H contains a high accuracy 2.5 V on-chip reference that can be used as the DAC and ADC reference.Power and isolation can be provided using the ADP1034 companion product. When using the ADP1034 and AD74115H together, programmable power control (PPC) is available on the positive analog supply, AVDD, which allows for an optimized power solution in the end application. An on-chip charge pump can be enabled if unipolar capability is required.APPLICATIONS Isolated industrial control systems Process control Factory automation Building control systems

SHARC DIGITAL SIGNAL PROCESSORS;

16-Bit, 1 MSPS, 8 Channel Data Acquisition System Features: Ease of use—16-bit, 1 MSPS complete data acquisition system High impedance, 8-channel input: >500 MΩ Differential input voltage range: ±24.576 V maximum High input common-mode rejection: >100 dB User-programmable input ranges Channel sequencer with individual channel gains On-chip 4.096 V reference and buffer Auxiliary input—direct interface to PulSAR ADC inputs No latency or pipeline delay (SAR architecture) Serial 4-wire, 1.8 V to 5 V SPI-/SPORT-compatible interface LFCSP package (6 mm × 6 mm) LQFP package (7 mm × 7 mm) −40°C to +85°C industrial temperature range