A2B Main/Subordinate 4xPDM XCVR w I2S/TDM Features:A2B BUS FEATURES Line topology Single main node, multiple subordinate nodes Up to 15 m between nodes and up to 40 m overall cable length Communication over distance Synchronous data Multichannel I2S/TDM to I2S/TDM Synchronous clock, phase aligned in all nodes Low latency node to node communication Control and status information I2C to I2C GPIO and interrupt Bus power or local power subordinate nodes Configurable with SigmaStudio/SigmaStudio+ graphical software tool AEC-Q100 qualified for automotive applicationsA2B TRANSCEIVER FEATURES Configurable A2B bus main node or subordinate node Programmable via I2C interface 8-bit to 32-bit multichannel I2S/TDM interface Programmable I2S/TDM data rate Up to 32 upstream and 32 downstream channels PDM interface Programmable PDM clock rate Up to 4 high dynamic range microphone inputs Simultaneous reception of I2S data with up to 4 PDM microphones Unique ID register for each transceiver Crossover or straight-through cabling Programmable settings to optimize EMC performance

Quad-Channel, Software Configurable Input/Output Features: Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal 16-bit, Σ-ADC with optional 50 Hz and 60 Hz rejection 13-bit monotonic DACs Charge pump for true zero voltage output Internal temperature sensor, 5°C accuracy On-chip diagnostics including open circuit and short-circuit detection Robust architecture SPI Temperature range: −40°C to +85°C 64-lead LFCSP

The AD74115H is a single-channel, software-configurable, input and output device for industrial control applications. The AD74115H provides a wide range of use cases, integrated on a single chip. These use cases include analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capability. The AD74115H also has an integrated HART modem. A serial peripheral interface (SPI) is used to handle all communications to the device, including communications with the HART modem. The digital input and digital outputs can be accessed via the SPI or the general-purpose input and output (GPIO) pins to support higher speed data rates.The device features a 16-bit, Σ-Δ analog-to-digital converter (ADC) and a 14-bit digital-to-analog converter (DAC). The AD74115H contains a high accuracy 2.5 V on-chip reference that can be used as the DAC and ADC reference.Power and isolation can be provided using the ADP1034 companion product. When using the ADP1034 and AD74115H together, programmable power control (PPC) is available on the positive analog supply, AVDD, which allows for an optimized power solution in the end application. An on-chip charge pump can be enabled if unipolar capability is required.APPLICATIONS Isolated industrial control systems Process control Factory automation Building control systems

ETHERNET CONTROLLER, 100MBPS, BGA-121; Data Rate: 100Mbps; Ethernet Type: -; Supply Voltage Min: 4.75V; Supply Voltage Max: 34V; Controller IC Case Style: BGA; No. of Pins: 121Pins; IC Int; Available until stocks are exhausted

SMART CARD INTERFACE, QFN-32; IC Function: Smart Card Interface; Supply Voltage Min: 2.7V; Supply Voltage Max: 3.6V; IC Package Type: QFN; No. of Pins: 32Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: To Be Advised; MSL: MSL 1 - Unlimited; SVHC: No SVHC (15-Jan-2018)

HOT SWAP CONTROLLER, 20V, LFCSP-EP-32;

IC Digital Coupler HYBRID SOP 16PIN PLASTIC

Energy Metering IC with Autocalibration Features: mSure autocalibration Automatic calibration based on a direct measurement of the full signal path Calibration procedure not requiring a reference meter mSure autocalibration Class 1 meter guaranteed 3 high performance ADCs 88 dB SNR High gain current channel: ±26.04 mV peak, 18.4 mV rms input at highest gain setting Advanced metrology feature set WATT, VAR, VA, Wh, VARh, and VAh Supports active energy standards: IEC 62053-21; IEC 62053-22; EN50470-3; OIML R46; and ANSI C12.20 Supports reactive energy standards: IEC 62053-23 and IEC 62053-24 Current and voltage rms measurement Power quality measurements Operating temperature, industrial range: −40°C to +85°C

1 kV RMS Six-Channel Digital Isolators (6/0 Channel Directionality) Features: Small, 20-lead QSOP 1000 V rms isolation rating Bidirectional communication Up to 25 Mbps data rate (NRZ) 3 V/5 V level translation High temperature operation: 105°C High common-mode transient immunity: >15 kV/μs Low power operation 3.3 V operation: 1.6 mA per channel maximum at 0 Mbps to 1 Mbps 7.8 mA per channel maximum at 25 Mbps 5 V operation: 2.2 mA per channel maximum at 0 Mbps to 1 Mbps 11.2 mA per channel maximum at 25 Mbps

400MHz SHARC+ DSP with 640KB L1, 256KB Shared L2 SRAM, 120-lead LQFP_EP Features:SHARC+ Core infrastructure 400 (max) Core clock frequency 640KB Level 1 (L1) SRAM memory with parity (optional ability to configure cache) 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 256KB on-chip Level 2 (L2) SRAM with ECC protection, up to 8 Mb (1 MB)Advanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 24 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 4x I2C, 2x UARTs 6x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 2-ch 12bit Housekeeping ADCs 22 GPIO pins, 24 DAI pins Thermal SensorPackage 14mm x 14mm 120-lead LQFP_EPAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications