Quad, 15 V, 256-Position Digital Potentiometer with Pin-Selectable SPI/I2C Features: 256-position, 4-channel End-to-end resistance 20 kΩ, 50 kΩ, 200 kΩ Pin-selectable SPI®- or I2C®-compatible interface Power-on preset to midscale Two package address decode pins AD0 and AD1 Rheostat mode temperature coefficient 30 ppm/°C Voltage divider temperature coefficient 5 ppm/°C Wide operating temperature range –40°C to +125°C 10 V to 15 V single supply; ±5 V dual supply

256-/1024-Position, Digital Potentiometers with Maximum 1% R-Tolerance Error and 20-TP Memory Features: Single-channel, 256-/1024-position resolution 20 kΩ, 50 kΩ, and 100 kΩ nominal resistance Maximum ±1% nominal resistor tolerance error (resistor performance mode) 20-times programmable wiper memory Rheostat mode temperature coefficient: 35 ppm/°C Voltage divider temperature coefficient: 5 ppm/°C +9 V to +33 V single-supply operation ±9 V to ±16.5 V dual-supply operation SPI-compatible serial interface Wiper setting readback Power-on refreshed from 20-TP memory

Nonvolatile, I2C Compatible 256-Position, Digital Potentiometer Features: Nonvolatile memory maintains wiper settings 256-position Thin LFCSP-10 (3 mm x 3 mm x 0.8 mm) package Compact MSOP-10 (3 mm × 4.9 mm × 1.1 mm) package I2C-compatible interface VLOGIC pin provides increased interface flexibility End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Resistance tolerance stored in EEPROM (0.1% accuracy) Power-on EEPROM refresh time < 1ms Software write protect command Address Decode Pin AD0 and Pin AD1 allow 4 packages per bus 100-year typical data retention at 55°C Wide operating temperature −40°C to +125°C 3 V to 5 V single supply

High Performance Fourth Generation DSP Features: 400 MHz core clock speed 3 Mbits of on-chip RAM FIR, IIR, and FFT accelerators 16-bit wide SDR SDRAM external memory interface Digital Applications Interface (DAI) enabling user-definable access to peripherals including an S/P DIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, DSP Serial and TDM modes 2 SPI-compatible ports supporting master and slave modes UART and Two-Wire Interface 16 Pulse Width Modulation (PWM) channels 3 full-featured timers 176 ld LQFP EPAD and 100 ld LQFP EPAD packages Commercial and Industrial temperature ranges

High Performance Fourth Generation DSP Features: 400 MHz core clock speed 3 Mbits of on-chip RAM FIR, IIR, and FFT accelerators 16-bit wide SDR SDRAM external memory interface Digital Applications Interface (DAI) enabling user-definable access to peripherals including an S/P DIF Tx/Rx, and 8-channel asynchronous sample rate converter Fully enhanced DMA engine including scatter/gather DMA, delay line DMA 8 serial ports (SPORTs) supporting I2S, left-justified sample pair, DSP Serial and TDM modes 2 SPI-compatible ports supporting master and slave modes UART and Two-Wire Interface 16 Pulse Width Modulation (PWM) channels 3 full-featured timers 176 ld LQFP EPAD and 100 ld LQFP EPAD packages Commercial and Industrial temperature ranges

8 Channel, 12-Bit, Configurable ADC/DAC with on-chip Reference, SPI interface Features: Download AD5592R-1-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. 8-channel, configurable ADC/DAC/GPIO Configurable as any combination of 8 × 12-bit DAC channels 8 × 12-bit ADC channels 8 × general-purpose digital input/output pins Integrated temperature sensor SPI interface Available in 16-ball, 2 mm × 2 mm WLCSP 16-lead, 3 mm × 3 mm LFCSP 16-lead TSSOP

Stereo PDM to I2S/TDM Converter Features: 2 channels of PDM audio inputs from digital microphones 64× decimation ratio of PDM to PCM audio data 24-bit resolution to support high sound pressure level (SPL) microphones 126 dB A-weighted SNR 4 kHz to 96 kHz output sampling rate Bit clock rates of 64×, 128×, 192×, 256×, 384×, or 512× the output sampling rate Automatic PDM clock generation Automatic power-down when BCLK is removed 0.36 mA DVDD operating current at 48 kHz sampling rate and 1.8 V supply Slave I2S or TDM output interface Up to TDM-16 supported Configurable TDM slots I/O supply voltage from 1.70 V to 3.63 V DVDD core supply voltage from 1.10 V to 1.98 V 4 μA typical DVDD shutdown current 9-ball, 1.26 mm × 1.26 mm, 0.4 mm pitch WLCSP Power-on reset

Dual-Channel, 2.3 GHz to 2.8 GHz, 20 W Receiver Front End Features: Integrated dual-channel RF front end 2-stage LNA and high power silicon SPDT switch On-chip bias and matching Single-supply operation High power handling at TCASE = 105°CLTE average power (9 dB PAR) full lifetime: 43 dBmGainHigh gain mode: 35 dB typical at 2.6 GHzLow gain mode: 14 dB typical at 2.6 GHzLow noise figureHigh gain mode: 1.0 dB typical at 2.6 GHzLow gain mode: 1.0 dB typical at 2.6 GHzHigh isolationRXOUT-CHA and RXOUT-CHB: 45 dB typicalTERM-CHA and TERM-CHB: 60 dB typicalLow insertion loss: 0.5 dB typical at 2.6 GHzHigh OIP3: 32 dBm typicalPower-down mode and low gain modeLow supply currentHigh gain mode: 110 mA typical at 5 VLow gain mode: 36 mA typical at 5 VPower-down mode: 12 mA typical at 5 VPositive logic control6 mm 6 mm, 40-lead LFCSP packagePin compatible with the ADRF5545A and ADRF5549 10 W versions

Isolated, Half Bridge Gate Driver, Dual Input, 4 A Output Features: 4 A peak current (<2 Ω RDSON_x) 2.5 V to 6.5 V logic input voltage 4.5 V to 35 V output supply voltage UVLO VDD1 positive going threshold: 2.5 V maximum Multiple UVLO options for VDDA and VDDB positive going threshold Grade A: 4.5 V maximum Grade B: 7.5 V maximum Grade C: 11.6 V maximum Precise timing characteristics 44 ns maximum propagation delay Adjustable dead time and dual input (ADuM4221) Adjustable dead time and single input (ADuM4221-1) No dead time control and dual input (ADuM4221-2) CMOS input logic levels High common-mode transient immunity: 150 kV/µs High junction temperature operation: 125°C Default low output Safety and regulatory approvals (pending) UL recognition per UL 1577 5700 V rms for 1 minute duration CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-11: VIORM = 849 V peak Increased creepage wide body, 16-lead SOIC_IC

ETHERNET CONTROLLER, 100MBPS, BGA-144; Data Rate:100Mbps; Ethernet Type:-; Supply Voltage Min:4.75V; Supply Voltage Max:34V; Controller IC Case Style:BGA; No. of Pins:144Pins; IC Interface Type:I2C, SPI; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Product Range:EtherCAT® Slave Controllers; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (27-Jun-2018)