The MAX25612/MAX25612B is a single-channel high-brightness LED (HB LED) driver for automotive front-light applications such as high beam, low beam, daytime running light (DRL), turn indicator, fog light and other LED lights. It can take an input voltage from 5V to 48V and can drive a string of LEDs with a maximum output voltage of 65V. The MAX25612/MAX25612B is fully synchronous and is suitable for boost and buck-boost applications that need synchronous rectification providing efficiencies greater than 90%.The MAX25612/MAX25612B senses output current at the high side of the LED string. High-side current sensing is required to protect against shorts from the output to the ground or battery input. It is also the most flexible scheme for driving LEDs, allowing boost, high-side buck, or buck-boost mode configurations. The PWM input provides LED dimming ratios of up to 5000:1, and the ICTRL input provides additional analog dimming capability in the MAX25612/MAX25612B. The MAX25612/MAX25612B also includes a active-low FLT flag that indicates open string, shorted string, and thermal shutdown. The MAX25612/MAX25612B has built-in spread-spectrum modulation for improved electromagnetic compatibility performance. The MAX25612/MAX25612B is available in a space-saving (4mm x 4mm), 20-pin side-wettable TQFN or a 20-pin TSSOP package and is specified to operate overthe -40°C to +125°C automotive temperature range.ApplicationsAutomotive Exterior Lighting:Commercial, Industrial, and Architectural LightingDaytime Running Lights (DRLs)Fog Light and Adaptive Front-Light AssembliesHigh-Beam/Low-Beam/Signal/Position Lights

The MAX25612/MAX25612B is a single-channel high-brightness LED (HB LED) driver for automotive front-light applications such as high beam, low beam, daytime running light (DRL), turn indicator, fog light and other LED lights. It can take an input voltage from 5V to 48V and can drive a string of LEDs with a maximum output voltage of 65V. The MAX25612/MAX25612B is fully synchronous and is suitable for boost and buck-boost applications that need synchronous rectification providing efficiencies greater than 90%.The MAX25612/MAX25612B senses output current at the high side of the LED string. High-side current sensing is required to protect against shorts from the output to the ground or battery input. It is also the most flexible scheme for driving LEDs, allowing boost, high-side buck, or buck-boost mode configurations. The PWM input provides LED dimming ratios of up to 5000:1, and the ICTRL input provides additional analog dimming capability in the MAX25612/MAX25612B. The MAX25612/MAX25612B also includes a active-low FLT flag that indicates open string, shorted string, and thermal shutdown. The MAX25612/MAX25612B has built-in spread-spectrum modulation for improved electromagnetic compatibility performance. The MAX25612/MAX25612B is available in a space-saving (4mm x 4mm), 20-pin side-wettable TQFN or a 20-pin TSSOP package and is specified to operate overthe -40°C to +125°C automotive temperature range.ApplicationsAutomotive Exterior Lighting:Commercial, Industrial, and Architectural LightingDaytime Running Lights (DRLs)Fog Light and Adaptive Front-Light AssembliesHigh-Beam/Low-Beam/Signal/Position Lights

Standard LEDs - SMD Surface Mount LED

LED Light Pipes Round Lightpipe LPC076CTP

LED Mounting Hardware RING MOUNTING RTN150

The MAX16803 current regulator operates from a 6.5V to 40V input-voltage range and delivers up to a total of 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16803 is adjusted by using an external current-sense resistor in series with the LEDs. A dimming input allows widerange 'pulsed' PWM operation. Wave-shaping circuitry reduces EMI. The differential current-sense input increases noise immunity. The MAX16803 is well suited for applications requiring high-voltage input and is able to withstand automotive load-dump events up to 40V. An on-board pass element minimizes external components while providing ±3.5% output-current accuracy. Additional features include a 5V regulated output and short-circuit and thermal protection.The MAX16803 is available in a thermally enhanced, 5mm x 5mm, 16-pin TQFN package and is specified over the automotive -40°C to +125°C temperature range.The MAX16836 is a newer and more cost effective product; except for different PWM dimming current slew rates, it provides the same performance and is pin-to-pin compatible with the MAX16803.ApplicationsAutomotive Exterior: Rear Combination Lights (RCL)Automotive Interior: Map, Courtesy, and Cluster LightingEmergency Vehicle Warning LightsGeneral LightingNavigation and Marine IndicatorsSignage, Gasoline Canopies, Beacons

The MAX16818 pulse-width modulation (PWM) LED driver controller provides high-output-current capability in a compact package with a minimum number of external components. The MAX16818 is suitable for use in synchronous and nonsynchronous step-down (buck) topologies, as well as in boost, buck-boost, SEPIC, and Cuk LED drivers. The MAX16818 is the first LED driver controller that enables Maxim's technology for fast LED current transients of up to 20A/µs and 30kHz dimming frequency.This device utilizes average-current-mode control that enables optimal use of MOSFETs with optimal charge and on-resistance characteristics. This results in the minimized need for external heatsinking even when delivering up to 30A of LED current. True differential sensing enables accurate control of the LED current. A wide dimming range is easily implemented to accommodate an external PWM signal. An internal regulator enables operation over a wide input voltage range: 4.75V to 5.5V or 7V to 28V and above with a simple external biasing device. The wide switching frequency range, up to 1.5MHz, allows for the use of small inductors and capacitors.The MAX16818 features a clock output with 180° phase delay to control a second out-of-phase LED driver to reduce input and output filter capacitors size or to minimize ripple currents. The MAX16818 offers programmable hiccup, overvoltage, and overtemperature protection.The MAX16818ETE+ is rated for the extended temperature range (-40°C to +85°C) and the MAX16818ATE+ is rated for the automotive temperature range (-40°C to +125°C). This LED driver controller is available in a lead-free, 0.8mm high, 5mm x 5mm 28-pin TQFN package with an exposed pad.ApplicationsFront Projectors/Rear Projection TVsLCD TVs and Display BacklightPortable and Pocket Projectors

The MAX1573 fractional charge pump drives up to four white LEDs with regulated constant current for uniform intensity. By utilizing proprietary adaptive 1x/1.5x modes and ultra-low-dropout current regulators, it maintains the highest possible efficiency over the full 1-cell Li+ battery input voltage range. The 1MHz fixed-frequency switching allows for tiny external components and the regulation scheme is optimized to ensure low EMI and low input ripple.An external resistor sets the full-scale LED current, while two digital inputs control on/off and select amongst three levels of brightness. A pulse-width modulation (PWM) signal can also be used to modulate LED brightness, requiring no additional components.The MAX1573 is available in the tiny chip-scale UCSP™ (4 x 4 grid) and 16-pin thin QFN packages.ApplicationsCell Phones/SmartphonesMP3 PlayersOther Handhelds with Color DisplaysPDAs, Digital Cameras, and Camcorders

The MAX1574 charge pump drives up to three whiteLEDs with regulated constant current for uniform intensity.By utilizing adaptive 1x/2x charge-pump modes andvery-low-dropout current regulators, it achieves 180mAoutput drive capability and high efficiency over the 1-celllithium-battery input voltage range. Fixed-frequency(1MHz) switching allows for tiny external components,and the regulation scheme is optimized to ensure low EMIand low input ripple.The MAX1574 uses an external resistor to set the fullscale100% LED current. An enable input (EN) is used forsimple on/off control or can be pulsed repeatedly to setlower LED current in multiple steps down to 5%. Once thedesired brightness is set, the MAX1574 maintains constantLED current as long as EN is kept high. If EN is keptlow for more than 2ms, the MAX1574 enters shutdown.The MAX1574 is available in a 10-pin 3mm x 3mm TDFNpackage (0.8mm max height).ApplicationsCamera Strobes/Flashes and Movie LightsCell Phones/SmartphonesLCD BacklightsPDAs, Digital Cameras, and Camcorders

The MAX6966/MAX6967 serial-interfaced peripheralsprovide microprocessors with 10 I/O ports rated to 7V.Each port can be individually configured as either: A 20mA constant-current LED driver (static or pulsewidthmodulated (PWM)). A 10mA constant-current LED driver (static or PWM). An open-drain logic output. An overvoltage-protected Schmitt logic input.Analog and switching LED intensity control is built in: Individual 8-bit PWM control per output. Individual 1-bit analog control (half/full) per output. Global 3-bit analog control applies to all LED outputs.PWM timing of the 10 port outputs may be optionallystaggered, consecutively phased in 45° increments.This spreads the PWM load currents over time in eightsteps, helping to even out the power-supply currentand reduce the RMS current.The MAX6966/MAX6967 can be configured to awakefrom shutdown on receipt of a minimum 3ms pulse onthe active-low CS input. This hardware-wakeup feature allows apower-management controller or similar ASIC to enablethe MAX6966/MAX6967 with preconfigured LED intensitysettings.Shutdown can be programmed to wait up to 4s, fadedown the sink currents to zero for a period of 1/16s to4s, and then shut down. A similar ramp-up from shutdowncan be programmed for 1/16s to 4s.The MAX6966/MAX6967 support hot insertion. All portpins remain high impedance in power-down (V+ = 0V)with up to 8V asserted on them.The DOUT/OSC pin can be configured as either theserial interface data output or optional PWM clockinput. The MAX6966 powers up defaulting as DOUToutput. The MAX6967 defaults as OSC input.For a similar part without the constant-current controls,refer to the MAX7317 data sheet.ApplicationsCell PhonesKeypad BacklightsLCD BacklightsLED Status IndicationPortable EquipmentRGB LED Drivers