LED Lenses 5mm Lo Prof Seal Red

LED Light Pipes Round Lightpipe LPC066CTP

The MAX20050–MAX20053 are high-brightness LED (HBLED) drivers for automotive exterior lighting applications.Consisting of a fully synchronous step-down converterwith integrated MOSFETs, the devices are capable ofdriving a series string of LEDs at up to 2A, with a minimumnumber of external components. The MAX20050/MAX20052 utilize internal loop compensation to minimizecomponent count, while the MAX20051/MAX20053/MAX20053D useexternal compensation for full flexibility.The wide 4.5V to 65V input supply range supports extremeautomotive cold crank and load-dump conditions. A low- andhigh-switching frequency option (400kHz or 2.1MHz)provides the designer with the flexibility to optimize forsolution size or efficiency, while avoiding interferencewithin the AM band. Spread spectrum provides furtheroptions for the designer to reduce EMI at the system level.The MAX20050/MAX20051 have an internal switchingfrequency of 400kHz, while the MAX20052/MAX20053have an internal switching frequency of 2.1MHz. In addition,the MAX20051B has spread spectrum disabled.High-side current regulation means only a singleconnection to the LED string is required; grounding of thestring can be done locally. In addition to PWM dimming,the ICs provide analog dimming using the REFI pin. Fullscalecurrent regulation accuracy is ±2.5%, while theaccuracy is ±8% at 10% of full-scale over the full temperaturerange of -40°C to +125°C. A 5V, 10mA LDO output isavailable for biasing other circuits.Fault-protection mechanisms include output overload,short-circuit, and device overtemperature protection. Thedevices are specified for operation over the full -40°C to+125°C temperature range and are available in thermallyenhanced 12-pin (3mm x 3mm) TDFN and 14-pin (5mm x4.4mm) TSSOP packages with an exposed pad. Design Solution: Driver Monitoring Systems Need a New Breed of IR-LEDDrivers ›ApplicationsClearance Lamps (CLLs)Commercial, Industrial, and Architectural LightingCorner Lamps (CLs)Daytime Running Lamps (DRLs)Driver Monitoring Systems (DMS)Fog LampsHead LampsRear Lamps

The MAX20050–MAX20053 are high-brightness LED (HBLED) drivers for automotive exterior lighting applications.Consisting of a fully synchronous step-down converterwith integrated MOSFETs, the devices are capable ofdriving a series string of LEDs at up to 2A, with a minimumnumber of external components. The MAX20050/MAX20052 utilize internal loop compensation to minimizecomponent count, while the MAX20051/MAX20053/MAX20053D useexternal compensation for full flexibility.The wide 4.5V to 65V input supply range supports extremeautomotive cold crank and load-dump conditions. A low- andhigh-switching frequency option (400kHz or 2.1MHz)provides the designer with the flexibility to optimize forsolution size or efficiency, while avoiding interferencewithin the AM band. Spread spectrum provides furtheroptions for the designer to reduce EMI at the system level.The MAX20050/MAX20051 have an internal switchingfrequency of 400kHz, while the MAX20052/MAX20053have an internal switching frequency of 2.1MHz. In addition,the MAX20051B has spread spectrum disabled.High-side current regulation means only a singleconnection to the LED string is required; grounding of thestring can be done locally. In addition to PWM dimming,the ICs provide analog dimming using the REFI pin. Fullscalecurrent regulation accuracy is ±2.5%, while theaccuracy is ±8% at 10% of full-scale over the full temperaturerange of -40°C to +125°C. A 5V, 10mA LDO output isavailable for biasing other circuits.Fault-protection mechanisms include output overload,short-circuit, and device overtemperature protection. Thedevices are specified for operation over the full -40°C to+125°C temperature range and are available in thermallyenhanced 12-pin (3mm x 3mm) TDFN and 14-pin (5mm x4.4mm) TSSOP packages with an exposed pad. Design Solution: Driver Monitoring Systems Need a New Breed of IR-LEDDrivers ›ApplicationsClearance Lamps (CLLs)Commercial, Industrial, and Architectural LightingCorner Lamps (CLs)Daytime Running Lamps (DRLs)Driver Monitoring Systems (DMS)Fog LampsHead LampsRear Lamps

The MAX20050–MAX20053 are high-brightness LED (HBLED) drivers for automotive exterior lighting applications.Consisting of a fully synchronous step-down converterwith integrated MOSFETs, the devices are capable ofdriving a series string of LEDs at up to 2A, with a minimumnumber of external components. The MAX20050/MAX20052 utilize internal loop compensation to minimizecomponent count, while the MAX20051/MAX20053/MAX20053D useexternal compensation for full flexibility.The wide 4.5V to 65V input supply range supports extremeautomotive cold crank and load-dump conditions. A low- andhigh-switching frequency option (400kHz or 2.1MHz)provides the designer with the flexibility to optimize forsolution size or efficiency, while avoiding interferencewithin the AM band. Spread spectrum provides furtheroptions for the designer to reduce EMI at the system level.The MAX20050/MAX20051 have an internal switchingfrequency of 400kHz, while the MAX20052/MAX20053have an internal switching frequency of 2.1MHz. In addition,the MAX20051B has spread spectrum disabled.High-side current regulation means only a singleconnection to the LED string is required; grounding of thestring can be done locally. In addition to PWM dimming,the ICs provide analog dimming using the REFI pin. Fullscalecurrent regulation accuracy is ±2.5%, while theaccuracy is ±8% at 10% of full-scale over the full temperaturerange of -40°C to +125°C. A 5V, 10mA LDO output isavailable for biasing other circuits.Fault-protection mechanisms include output overload,short-circuit, and device overtemperature protection. Thedevices are specified for operation over the full -40°C to+125°C temperature range and are available in thermallyenhanced 12-pin (3mm x 3mm) TDFN and 14-pin (5mm x4.4mm) TSSOP packages with an exposed pad. Design Solution: Driver Monitoring Systems Need a New Breed of IR-LEDDrivers ›ApplicationsClearance Lamps (CLLs)Commercial, Industrial, and Architectural LightingCorner Lamps (CLs)Daytime Running Lamps (DRLs)Driver Monitoring Systems (DMS)Fog LampsHead LampsRear Lamps

The MAX20444B is a 4-channel backlight driver with boostcontroller for automotive displays. The integrated currentoutputs can sink up to 130mA LED current each. Thedevice accepts a wide 4.5V to 36V input voltage rangeand withstands direct automotive load-dump events.The internal current-mode switching DC-DC controllersupports boost or SEPIC topologies and operates in thefrequency range 400kHz to 2.2MHz. Integrated spread spectrumhelps reduce EMI. An adaptive output-voltagecontrol scheme minimizes power dissipation in the LEDcurrent-sink paths.The device features I2C-controlled pulse-widthmodulation (PWM) dimming and hybrid dimming. In eithercase the minimum pulse width is 500ns. Phase-shifteddimming of the strings is incorporated for lower EMI.Comprehensive diagnostic information is also availablevia the I2C interface, while stand-alone operation is also supported.The MAX20444B is available in a 24-pin TQFN or 24-pin side-wettable TQFN (SWTQFN) package and operates over the -40°C to +125°C temperature range.ApplicationsCentral Information DisplaysInfotainment DisplaysInstrument Clusters

The MAX25512 is a four-channel white LED backlight driver with an integrated current-mode boost converter which operates over a switching frequency range of 400kHz to 2.2MHz and incorporates spread spectrum. Phase-shifting of the output channels is included as an option to further reduce electromagnetic interference (EMI).The device provides up to 120mA per channel and includes a control output for an external nMOS series switch. It is capable of operating down to 3V after startup.The MAX25512 has an I2C interface to enable flexibility of control and detailed diagnostics.The MAX25512 is available in a compact TQFN package and operates over the temperature range -40°C to +125°C.ApplicationsAutomotive Instrument ClustersAutomotive Central Information DisplaysAutomotive Head-Up Displays

The MAX25600 is a synchronous 4-switch buck-boost LED driver controller. The controller regulates the LED current for LED string voltages from 0V to 60V. The MAX25600 can be used as a seamless buck-boost LED driver for applications that require an efficient buck-boost LED driver with synchronous rectification. The MAX25600 is ideal for high-power applications that require a current source with PWM dimming capability.The device provides seamless transition between buck, boost, and buck-boost modes depending on the ratio of input to output voltage. The MAX25600 is ideal for LED driver applications in automotive, industrial, and other LED lighting applications. A fault flag indicates open LED, shorted LED, or thermal shutdown conditions. The device uses Maxim's proprietary average-current-mode control scheme and allows adjustable 200kHz to 700kHz fixed-frequency operation. In addition, ±6% triangular spread spectrum is added internally to the oscillator to improve EMI performance. The MAX25600 provides both analog and digital PWM dimming, and has built-in analog PWM dimming at a dimming frequency of 200Hz. The adjustable soft-start feature limits the current peaks and voltage overshoots at startup. The MAX25600 integrates a high-side p-channel dimming MOSFET driver for PWM dimming applications that require fast rising and falling edges of the LED current. It also features robust output open and short protection, is AEC qualified, and is suitable for automotive applications. Design Solution: Improve Automotive Exterior LED Lighting with Buck-Boost Average Current Control ›ApplicationsAutomotive Exterior Lighting and General, Commercial, and Industrial Lighting

The MAX25601A/B/C/D is a synchronous boost controller followed by a synchronous buck LED controller. The 4.5V to 40V input voltage range of the boost controller is ideal for automotive applications, and acts as a pre-boost power supply for the second-stage buck LED controller.The synchronous boost is a current-mode controller that can be be paralleled with another device to provide higher output power. A SYNCOUT pin provides the clock to drive the RT/SYNCIN pin of the other device, enabling two-phase 180-degree out-of-phase operation. The boost converter can be programmed with a switching frequency of 200kHz to 2.2MHz. Spread spectrum is included to reduce EMI. An internal digital soft-start feature is provided to enable a smooth power up of the boost output. Protection features like hiccup mode, overvoltage protection, and thermal shutdown are provided.The synchronous buck LED controller uses Maxim's F3 Architecture, a proprietary average-current-mode control scheme to regulate the inductor current at a constant switching frequency without any control-loop compensation. Inductor current is sensed in the bottom synchronous n-channel MOSFET. The device operates over a wide 4.5V to 65V input range at switching frequencies as high as 1MHz. Both analog and PWM dimming are included. LED current can be monitored on the IOUTV pin.Both controllers have high- and low-side gate drivers with at least 1A peak source and sink-current capability. Adaptive non-overlap control logic prevents shoot-through currents during transition. Both the boost and the buck faults are monitored on the active-low FLT pin.The MAX25601A/C is available in a 32-pin SWTQFN package and the MAX25601B/D is available in a 28-pin TSSOP package. The 32-pin package features an additional switch control that can be used in high-beam/low-beam and heads-up display applications.ApplicationsAutomotive Exterior Lighting: High-Beam/Low-Beam/ Signal/Position Lights, Daytime Running Lights (DRLs), Matrix Light, Pixel Light, and Other Adaptive Front-Light AssembliesCommercial, Industrial, and Architectural Lighting

The MAX25605 is a six-channel automotive sequential LED controller. The device implements a sequential turn function or any other sequential light animation without the use of a microcontroller or software. The MAX25605 integrates six cascoded low RDSON n-channel MOSFETs suitable for LED lighting applications up to 750mA. Each switch supports up to three series LEDs per switch. The entire LED string voltage supported is up to 60V. The n-channel MOSFETs are divided into two groups of three, allowing a single device to sequence either one or two strings of LEDs. Integrated gate drivers and level shifters for the switches are supplied by an internal charge-pump regulator, supporting buck-boost and boost-to-battery applications, in addition to ground-referenced LED driver topologies.Sequencing functionality and timing is programmed by connecting resistors to the A0, A1, A2, and CLK inputs. Programming options include: dimming up/down, short LED threshold, multi-device sequence position, dimming frequency, and fade duration. The optional logarithmic fade feature allows for gradually turning the LEDs on or off. The sequence can be disabled by pulling the enable input low. With EN pulled low, the switches are open and the LED driver current flows through the entire LED string. Each switch also integrates single-LED fault detection, asserting a fault flag in case of shorted LEDs, open LEDs, or open wires between the sequencer and the LED string. Additionally, up to 16 devices can be sequenced together through the use of a SYNC input.The MAX25605 operates over the -40°C to +125°C automotive temperature range and is available in a 20-pin 4mmx4mm side-wettable TQFN and a 20-pin TSSOP package with exposed pad.ApplicationsHardware-Based Lighting AnimationSequential Turn Signal Lights