Board Mount Hall Effect/Magnetic Sensors Bipolar 4V - 24V 5 mA

Board Mount Hall Effect/Magnetic Sensors POSITION&CURRENT SENSORS

Acceleration Sensor Development Tools Development Kit for IIM-42352

Board Mount Hall Effect/Magnetic Sensors Flat TO-92, 4.5Vdc Ratiometric, SMT

Automotive, high-precision, linear 3D Hall-effect sensor with SPI bus interface 8-VSSOP -40 to 150

Features for the TMAG5170-Q1:

• AEC-Q100 qualified for automotive applications:
  
  • Temperature grade 0: –40°C to 150°C
• High-precision linear 3D Hall-effect sensor to optimize position sensing speed and accuracy:
  
  • Linear measurement total error: ±2.6% (maximum at 25°C)
  • Sensitivity temperature drift: ±2.8% (maximum)
  • 20-kSPS conversion rate for single axis
• Functional Safety-Compliant:
  
  • Developed for functional safety applications
  • Documentation available to aid ISO 26262 system design
  • Systematic capability up to ASIL D
  • Hardware integrity up to ASIL B
• 10-MHz serial peripheral interface (SPI) with cyclic redundancy check (CRC)
• Built-in temperature sensor with < ±3°C error
• Independently selectable X, Y, and Z ranges:
  
  • TMAG5170A1 -Q1: ±25, ±50, ±100 mT
  • TMAG5170A2 -Q1: ±75, ±150, ±300 mT
• Autonomous wake-up and sleep mode for threshold detection consuming only 1.5 µA
• ALERT function to initiate sensor conversion or indicate conversion complete
• Integrated temperature compensation for multiple magnet types
• Integrated angle CORDIC calculation with gain and offset adjustment
• 2.3-V to 5.5-V supply voltage range

The analog output ADXL354 and the digital output ADXL355 are low noise density, low 0 g offset drift, low power, 3-axis accelerometers with selectable measurement ranges. The ADXL354B supports the ±2 g and ±4 g ranges, the ADXL354C supports the ±2 g and ±8 g ranges, and the ADXL355 supports the ±2 g, ±4 g, and ±8 g ranges. The ADXL354/ADXL355 offerindustry leading noise, minimal offset drift over temperature, and long-term stability enabling precision applications with minimal calibration.Highly integrated in a compact form factor, the low power ADXL355 is ideal in an Internet of Things (IoT) sensor node and other wireless product designs. The ADXL355 multifunction pin names may be referenced by their relevant function only for either the serial peripheral interface (SPI) or I2C interface.Applications Inertial measurement units (IMUs)/altitude and heading reference systems (AHRS) Platform stabilization systems Structural health monitoring Seismic imaging Tilt sensing Robotics Condition Monitoring

Industrial Hall Effect/Magnetic Sensors Commercial SS Magnet

The high performance ADXL350 is a small, thin, low power,3-axis accelerometer with high resolution (13-bit) and selectablemeasurement ranges up to ±8 g. The ADXL350 offers industry-leading temperature performance with guaranteed min/max specification for offset over temperature. Digital output data isformatted as 16-bit twos complement and is accessible througheither a SPI (3- or 4-wire) or I2C digital interface.The ADXL350 is well suited for high performance portableapplications. It measures the static acceleration of gravity in tilt sensingapplications, as well as dynamic acceleration resultingfrom motion or shock. Its high resolution (2 mg/LSB) enablesmeasurement of inclination changes of less than 1.0°.Several special sensing functions are provided. Activity andinactivity sensing detect the presence or lack of motion and ifthe acceleration on any axis exceeds a user-set level. Tap sensingdetects single and double taps. Free-fall sensing detects if thedevice is falling. These functions can be mapped to one of twointerrupt output pins.Low power modes enable intelligent motion-based powermanagement with threshold sensing and active accelerationmeasurement at extremely low power dissipation.The ADXL350 is supplied in a small, thin, 3 mm × 4 mm ×1.2 mm, 16-lead cavity laminate package.APPLICATIONS Portable Consumer Devices High performance medical and industrial applications

The ADXL362 is an ultralow power, 3-axis MEMS accelerometer that consumes less than 2 μA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates.The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ±2 g, ±4 g, and ±8 g are available, with a resolution of 1 mg/LSB on the ±2 g range. For applications where a noise level lower than the normal 550 μg/√Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 μg/√Hz typical) can be selected at minimal increase in supply current.In addition to its ultralow power consumption, the ADXL362 has many features to enable true system level power reduction. It includes a deep multimode output FIFO, a built-in micropower temperature sensor, and several activity detection modes including adjustable threshold sleep and wake-up operation that can run as low as 270 nA at a 6 Hz (approximate) measurement rate. A pin output is provided to directly control an external switch when activity is detected, if desired. In addition, the ADXL362 has provisions for external control of sampling time and/or an external clock.The ADXL362 operates on a wide 1.6 V to 3.5 V supply range, and can interface, if necessary, to a host operating on a separate, lower supply voltage. The ADXL362 is available in a 3 mm × 3.25 mm × 1.06 mm package.APPLICATIONS Hearing aids Home healthcare devices Motion enabled power save switches Wireless sensors Motion enabled metering devices

Board Mount Hall Effect/Magnetic Sensors Linear incremental position sensor