S32K312, 2MB FLASH, SINGLECORE / TRAY ROHS COMPLIANT: YES

16KB, 8KB RAM, 20P, 24MHZ, MVIO, 12B ADC, ZCD, DAC, 2XUART, SPI, TWI 20 VQFN 3X3X0.9MM TRAY ROHS COMPLIANT: YES

The DS89C430 and DS89C450 offer the highest performance available in 8051-compatible microcontrollers. They feature newly designed processor cores that execute instructions up to 12 times faster than the original 8051 at the same crystal speed. Typical applications will experience a speed improvement up to 10x. At 1 million instructions per second (MIPS) per megahertz, themicrocontrollers achieve 33 MIPS performance from a maximum 33MHz clock rate.The DS89C440 is a 32kB version of the DS89C450 that is no longer available. The DS89C450 can be used as a drop-in replacement.ApplicationsAutomated Test Equipment (ATE)Building Energy Control and ManagementBuilding Security and Door Access ControlConsumer ElectronicsData LoggingGaming EquipmentHVACIndustrial Control and AutomationMagstripe Reader/ScannerMotor ControlProgrammable Logic ControllersTelephonesUninterruptible Power SuppliesVendingWhite Goods (Washers, Microwaves, Etc.)

The MAX1464 is a highly integrated, low-power, low-noisemultichannel sensor signal processor optimizedfor industrial and process-control applicationssuch as pressure sensing and compensation,RTD and thermocouple linearization, weight sensingand classification, and remote process monitoring withlimit indication.The MAX1464 accepts sensors with either single-endedor differential outputs. The MAX1464 accommodatessensor output sensitivities from 1mV/V to 1V/V. TheMAX1464 provides amplification, calibration, signal linearization,and temperature compensation that enablean overall performance approaching the inherentrepeatability of the sensor without requiring any externaltrim components.Two 16-bit voltage-output DACs and two 12-bit PWMscan be used to indicate each of the temperature-compensatedsensor signals independently, as a sum ordifference signal, or user-defined relationship betweeneach signal and temperature. Uncommitted op ampsare available to buffer the DAC outputs, drive heavierexternal loads, or provide additional gain and filtering.The MAX1464 incorporates a 16-bit CPU, user-programmable4kB of FLASH program memory, 128 bytesof FLASH user information, one 16-bit ADC, two 16-bitDACs, two 12-bit PWM digital outputs, four rail-to-railop amps, one SPI™-compatible interface, two GPIOs,and one on-chip temperature sensor.The MAX1464 operates from a single 5.0V (typ) supplyand is packaged for automotive, industrial, and commercialtemperature ranges in a 28-pin SSOP package. FAQs: MAX1464ApplicationsCalibrators and ControllersGMR and MR Magnetic Direction SensorsPressure Sensor Signal ConditioningProcess IndicatorsThermocouple and RTD LinearizationTransducers and TransmittersWeight Measurement Systems

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you would not dream of sending other micro controllers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32620/MAX32621 feature an Arm® Cortex®-M4 with FPU CPU that delivers high-efficiency signal processing, ultra-low power consumption and ease of use.Flexible power modes, an intelligent PMU, and dynamic clock and power gating optimize performance and power consumption for each application. Internal oscillators run at 96MHz for high-performance or 4MHz to maximize battery life in applications requiring always-on monitoring.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.All versions provide a hardware AES engine. The MAX32621 is provides a secure trust protection unit (TPU) with a modular arithmetic accelerator (MAA) for fast ECDSA, a hardware PRNG entropy generator, and a secure boot loader. The MAX32620L provides a reduced 1MB of flash memory.This data sheet applies to revision C and later. Legacy mode operation provides compatibility with revision A.MAX32620 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubSport WatchesWearable Medical Patches

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you wouldn’t dream of sending other microcontrollers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32625/MAX32626 feature an Arm® Cortex®-M4 with FPU CPU that delivers high-efficiency signal processing, ultra-low power consumption and ease of use.Flexible power modes, an intelligent PMU, and dynamic clock and power gating optimize performance and power consumption for each application. Internal oscillators run at 96MHz for high-performance or 4MHz to maximize battery life in applications requiring always-on monitoring.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.All versions provide a hardware AES engine. The MAX32626 provides a secure trust protection unit (TPU) with a modular arithmetic accelerator (MAA) for fast ECDSA, a hardware PRNG entropy generator, and a secure boot loader. The MAX32625L provides a reduced 256kB of flash memory and 128kB of SRAM.MAX32625 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubsSports WatchesWearable Medical Patches

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you wouldn’t dream of sending other microcontrollers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32625/MAX32626 feature an Arm® Cortex®-M4 with FPU CPU that delivers high-efficiency signal processing, ultra-low power consumption and ease of use.Flexible power modes, an intelligent PMU, and dynamic clock and power gating optimize performance and power consumption for each application. Internal oscillators run at 96MHz for high-performance or 4MHz to maximize battery life in applications requiring always-on monitoring.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.All versions provide a hardware AES engine. The MAX32626 provides a secure trust protection unit (TPU) with a modular arithmetic accelerator (MAA) for fast ECDSA, a hardware PRNG entropy generator, and a secure boot loader. The MAX32625L provides a reduced 256kB of flash memory and 128kB of SRAM.MAX32625 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubsSports WatchesWearable Medical Patches

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you wouldn’t dream of sending other microcontrollers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32625/MAX32626 feature an Arm® Cortex®-M4 with FPU CPU that delivers high-efficiency signal processing, ultra-low power consumption and ease of use.Flexible power modes, an intelligent PMU, and dynamic clock and power gating optimize performance and power consumption for each application. Internal oscillators run at 96MHz for high-performance or 4MHz to maximize battery life in applications requiring always-on monitoring.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.All versions provide a hardware AES engine. The MAX32626 provides a secure trust protection unit (TPU) with a modular arithmetic accelerator (MAA) for fast ECDSA, a hardware PRNG entropy generator, and a secure boot loader. The MAX32625L provides a reduced 256kB of flash memory and 128kB of SRAM.MAX32625 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubsSports WatchesWearable Medical Patches

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you wouldn’t dream of sending other microcontrollers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32630-MAX32632 feature an Arm® Cortex®-M4 with FPU CPU that delivers ultra-low power, high-efficiency signal processing functionality with significantly reduced power consumption and ease of use.Flexible power modes, an intelligent peripheral management unit (PMU), dynamic clock gating and firmware-controlled power gating optimizes power for the specific application.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.The MAX32631/MAX32632 are secure versions of the MAX32630. They provide a trust protection unit (TPU) with encryption and advanced security features. These include a modular arithmetic accelerator (MAA) for fast ECDSA, a true random number generator, and a hardware AES engine. The MAX32632 also provides a secure bootloader for additional security and life-cycle management.Design Solution: Take a Weight Off Your Chest with a Wrist-Worn ECG Monitor ›MAX32630 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubsSports WatchesWearable Medical Patches

DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power technology. They are also tough enough to withstand the most advanced cyberattacks. DARWIN microcontrollers are designed to run any application imaginable—in places where you wouldn’t dream of sending other microcontrollers.Generation U microcontrollers are perfect for wearables and IoT applications that cannot afford to compromise power or performance. The MAX32630-MAX32632 feature an Arm® Cortex®-M4 with FPU CPU that delivers ultra-low power, high-efficiency signal processing functionality with significantly reduced power consumption and ease of use.Flexible power modes, an intelligent peripheral management unit (PMU), dynamic clock gating and firmware-controlled power gating optimizes power for the specific application.Multiple SPI, UART, I2C, 1-Wire® master, and USB interfaces are provided. The four-input, 10-bit ADC with selectable references can monitor external sensors.The MAX32631/MAX32632 are secure versions of the MAX32630. They provide a trust protection unit (TPU) with encryption and advanced security features. These include a modular arithmetic accelerator (MAA) for fast ECDSA, a true random number generator, and a hardware AES engine. The MAX32632 also provides a secure bootloader for additional security and life-cycle management.Design Solution: Take a Weight Off Your Chest with a Wrist-Worn ECG Monitor ›MAX32630 User's GuideMaxim Low Power ARM Micro Toolchain (Mac)Maxim Low Power ARM Micro Toolchain (Windows)ApplicationsFitness MonitorsPortable Medical DevicesSensor HubsSports WatchesWearable Medical Patches