OTHER MPUS MICROPROCESSORS;

Low-Power, Precision Analog Microcontroller, Dual - ADCs, Flash/EE, ARM7TDMI Features: Analog input/output - See data sheet for additional information. Microcontroller ARM7TDMI core, 16-/32-bit RISC architecture JTAG port supports code download and debug Multiple clocking options Memory 32 kB (16 kB × 16) Flash/EE memory 4 kB (1 kB × 32) SRAM Tools In-circuit download, JTAG based debug Low cost, QuickStart development system Communications interfaces SPI interface (5 Mbps) 4-byte Rx and Tx FIFOs UART serial I/O and I2C (master/slave) See Data Sheet for Additional Information

Precision Analog Microcontroller, 14-Bit Analog I/O with MDIO Interface, Arm Cortex-M3 Features:Analog input/output Multichannel, 14-bit, 1 MSPS analog-to-digital converter (ADC) Up to 16 ADC input channels 8 x 12-bit VDACs with a range of 0 V to 2.5 V or AVDD 4 x 12-bit IDACs with a range of 0 mA to 150 mA Voltage comparatorMicrocontroller ARM Cortex-M3 processor, 32-bit RISC architectureClocking options 80 MHz PLL with programmable divider Trimmed on-chip oscillator (±3%)Memory 2 × 128 kB independent Flash/EE memories 10,000 cycle Flash/EE endurance 20-year Flash/EE retention 32 kB SRAMOn-chip peripherals MDIO slave up to 4 MHz 2 × I2C, 2 × SPI, UART Temperature range Fully specified for −40°C to +105°C ambient operationSee data sheet for additional features.

Precision Analog Microcontrollers, Analog I/O with MDIO Interface, ARM Cortex-M3 Features: Analog input/output Multichannel, 12-bit, 1 MSPS analog-to-digital converter (ADC) Up to 16 ADC input channels 0 V to VREF analog input range Single-ended modes AVDD and IOVDD monitors 12-bit voltage output digital-to-analog converters (VDACs) 8 VDACs with a range of 0 V to 2.5 V or AVDD outputs Voltage comparator Microcontroller ARM Cortex-M3 processor, 32-bit RISC architecture Serial wire port supports code download and debug Clocking options 80 MHz phase-locked loop (PLL) with programmable divider Trimmed on-chip oscillator (±3%) External 16 MHz crystal option External clock source up to 80 MHz Memory 2 × 128 kB independent Flash/EE memories 10,000 cycle Flash/EE endurance 20-year Flash/EE retention 32 kB SRAM Software triggered in-circuit reprogrammability via management data input/output (MDIO) On-chip peripherals MDIO slave up to 4 MHz 2 × I2C, 2 × SPI, UART Multiple general-purpose input/output (GPIO) balls: 3.6 V compliant 7 × 1.2 V compatible when used for MDIO 32-element programmable logic array (PLA) 3 general-purpose timers Wake-up timer Watchdog timer 16-bit pulse width modulator (PWM) Power Supply range: 2.9 V to 3.6 V Flexible operating modes for low power applications Packages and temperature range 6 mm × 6 mm, 96-ball CSP_BGA package Fully specified for −40°C to +105°C ambient operation Tools QuickStart development system Full third-party support

Precision Analog Microcontroller with Chemical Sensor Interface Features: Analog input/output 16-bit, 400 kSPS ADC Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers, PGA Voltage DACs Two dual output voltage DACs Output range: 0.2 V to 2.4 V (±2.2 V voltage potential to sensor) for 12-bit outputs Two bias potentiostat and TIA amplifiers   Ultralow power, 1 μA per amplifier One high speed 12-bit voltage DAC Output range to sensor: −607 mV to +607 mV High speed TIA for impedance measurements Programmable gain amplifier on output Amplifiers, accelerators, and references Two low power, low noise amplifiers Suitable for potentiostat bias in electrochemical sensing Two low power, low noise TIAs Suitable for measuring sensor current output in the ±0.00005 μA to ±3000 μA range Programmable load and gain resistors Analog hardware accelerators Digital waveform generator DFT and digital filters 2.5 V and 1.82 V on-chip, precision voltage references Internal Temperature Sensor, ±2°C accurate Impedance measurement range of <1 Ω to 10 MΩ, 0.016 Hz to 200,000 Hz Voltammetry scan rate up to 2000 steps per second Microcontroller 26 MHz ARM Cortex-M3 processor Serial wire port supports code download and debugging 128 kB flash/64 kB of SRAM Security and safety Hardware cyclic redundancy check (CRC) with programmable polynomial generator Read and write protection of user flash On-chip peripherals UART, I2C, and SPI serial input/output Up to 17 GPIO pins External interrupt option General-purpose, wake-up, and watchdog timers Power 2.8 V to 3.6 V supply and active measurement range Power supply monitor Active current consumption: 30 μA/MHz for digital section Hibernate with bias to external sensor: 8.5 μA Shutdown mode with no SRAM retention: 2 μA Package and temperature range 6 mm × 5 mm, 72-lead LGA package Fully specified for −40°C to +85°C ambient operation

MICROCONTROLLERS (MCU) - 16/32 BIT - ARM ROHS COMPLIANT: YES

8-bit Microcontrollers - MCU High-Speed Low-Power

8-bit Microcontrollers - MCU High-Speed Low-Power

8-bit Microcontrollers - MCU High-Speed Low-Power

8-bit Microcontrollers - MCU FS70AB037AI - Repl for Intel 8