The ADXRS450 is an angular rate sensor (gyroscope) intended for industrial, medical, instrumentation, stabilization, and other high performance applications. An advanced, differential, quad sensor design rejects the influence of linear acceleration, enabling the ADXRS450 to operate in exceedingly harsh environments where shock and vibration are present.The ADXRS450 uses an internal, continuous self-test architecture. The integrity of the electromechanical system is checked by applying a high frequency electrostatic force to the sense structure to generate a rate signal that can be differentiated from the baseband rate data and internally analyzed.The ADXRS450 is capable of sensing angular rate of up to ±300°/sec. Angular rate data is presented as a 16-bit word, as part of a 32-bit SPI message.The ADXRS450 is available in a cavity plastic 16-lead SOIC (SOIC_CAV) and an SMT-compatible vertical mount package (LCC_V), and is capable of operating across both a wide voltage range (3.3 V to 5 V) and temperature range (−40°C to +105°C).APPLICATIONSRotation sensing medical applicationsRotation sensing industrial and instrumentationHigh performance platform stabilization

The ADXL326 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±16 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.The ADXL326 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

Precision 1.7 g, 5 g, 18 g Dual-Axis iMEMS Accelerometer Features: High performance dual-axis accelerometer on a single IC chip 5 mm × 5 mm × 2 mm LCC package 1 mg resolution at 60 Hz Low power: 700 µA at VS = 5 V (typical) High zero g bias stability High sensitivity accuracy –40°C to +125°C temperature range X and Y axes aligned to within 0.1° (typical) BW adjustment with a single capacitor Single-supply operation 3500 g shock survival RoHS-compliant Compatible with Sn/Pb- and Pb-free solder processes

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in plane axis accelerometer with analog output Full-scale range: ±100 g Linear frequency response range: dc to 23 kHz typical (3 dB point) Resonant frequency: 42 kHz typical Ultralow noise density: 75 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C operating temperature range 32-lead, 5 mm × 5 mm × 1.80 mm LFCSP package See datasheet for additional features

Small, Low Power, 3-Axis, 16 g Accelerometer Features: 3-axis sensing with ±16 g minimum measurement range Small, low profile package 12-lead, 4 mm × 4 mm × 1.45 mm LFCSP Low quiescent supply current: 350 µA typical Single-supply operation: 1.8 V to 3.6 V 10,000 g shock survivalExcellent temperature stabilityBandwidth (BW) adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant40C to +105C operating temperature rangeQualified for automotive applications

Small and Thin, 5 g Accelerometer Features: Small and thin 4 mm × 4 mm × 1.45 mm LFCSP package 2 mg resolution at 60 √Hz Wide supply voltage range: 2.4 V to 5.25 V Low power: 350 µA at Vs = 2.4 V (typ) Good zero gbias stability Good sensitivity accuracy X-axis and Y-axis aligned to within 0.1° (typ) BW adjustment with a single capacitor Single-supply operation 10,000 g shock survival Compatible with Sn/Pb and Pb-free solder processes

Low Noise, Low Drift, Low Power, 3-Axis MEMS Accelerometer Features: Hermetic package offers optimal long-term stability 0 g offset vs. temperature (all axes): 0.75 mg/°C maximum Ultralow noise spectral density (all axes): 75 g/Hz Low power, VSUPPLY (LDO regulator enabled) Measurement mode: 150 μA Standby mode: 21 μA User adjustable analog output bandwidth Integrated temperature sensor Voltage range options VSUPPLY with internal regulators: 2.25 V to 3.6 V V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V typical 10% Operating temperature range: 40C to +125C 14-terminal, 6 mm 5.6 mm 2.2 mm, LCC packageADXL356-EP supports defense and aerospace applications (AQEC standard)Download ADXL356-EP Data Sheet (pdf)Military temperature range: −55°C to +125°CControlled manufacturing baselineOne assembly/test siteOne fabrication siteProduct change notificationQualification data available on requestV62/18610 DSCC Drawing Number

Precision MEMS IMU Module Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16467-1) 0.15°/√hr angular random walk (ADIS16467-1 and ADIS16467-2) ±0.05° axis to axis misalignment error Triaxial, digital accelerometer, ±40 g 13 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI-compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C

Precision MEMS IMU Module Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16467-1) 0.15°/√hr angular random walk (ADIS16467-1 and ADIS16467-2) ±0.05° axis to axis misalignment error Triaxial, digital accelerometer, ±40 g 13 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI-compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C