MAINS POWER ADAPTER FOR DAS220 & DAS240 (EURO VERSION)

BATTERY HOLDER AA PANEL; Battery Sizes Accepted:AA; No. of Batteries:4; Product Range:-; Accessory Type:Battery Holder; Battery Terminals:PCB Lug; Body Material:Aluminum; Contact Plating:Nickel Plated Contacts

SEPIC Constant- or Programmable-Current/Constant-Voltage Battery Charger Features: Charger Input Voltage May Be Higher, Equal to or Lower Than Battery Voltage Charges Any Number of Cells Up to 20V 1% Voltage Accuracy for Rechargeable Lithium Batteries 100mV Current Sense Voltage for High Efficiency (LT1513) 0mV Current Sense Voltage for Easy Current Programming (LT1513-2) Battery Can Be Directly Grounded 500kHz Switching Frequency Minimizes Inductor Size Charging Current Easily Programmable or Shut Down

Constant-Current/Constant-Voltage Battery Charger with Preset Voltage and Termination Flag Features: Fast Charging of Li-Ion, NiMH and NiCd Batteries Simple Charge Current Programming Requires Only One Low Cost, 1/32W Resistor High Efficiency Charger with Up to 1.5A Charge Current Precision 0.6% Internal Voltage Reference Preset Battery Voltages: 4.1V, 4.2V, 8.2V, 8.4V 500kHz or 200kHz Switching Frequency Minimizes Charger Size Low Reverse Battery Drain Current: 5µA Flag Indicates Li-Ion Charge Completion 5% Typical Charge Current Accuracy Low Shutdown Current LT1571-1: 200kHz, Adjustable Voltage LT1571-2: 200kHz, Fixed 8.2V or 8.4V LT1571-5: 500kHz, Fixed 4.1V or 4.2V

Constant-Current/Voltage High Efficiency Battery Charger Features: Simple Charging of Li-Ion, NiMH and NiCd Batteries Very High Efficiency: Up to 97% Precision 0.5% Charging Voltage Accuracy Preset Battery Voltages: 12.3V, 12.6V, 16.4V and 16.8V 5% Charging Current Accuracy Charging Current Programmed by Resistor or DAC 0.5V Dropout Voltage, Duty Cycle > 99.5% AC Adapter Current Limit* Maximizes Charging Rate Flag Indicates Li-Ion Charge Completion Auto Shutdown with Adapter Removal Only 10µA Battery Drain When Idle Synchronizable Up to 280kHz

Constant-Voltage/Constant-Current Battery Charger Features: Charges NiCd, NiMH and Lithium-Ion Batteries - Only One 1/10W Resistor Is Needed to Program Charging Current High Efficiency Current Mode PWM with 1.5A Internal Switch and Sense Resistor 3% Typical Charging Current Accuracy Precision 0.5% Voltage Reference for Voltage Mode Charging or Overvoltage Protection Current Sensing Can Be at Either Terminal of the Battery Low Reverse Battery Drain Current: 3µA Charging Current Soft Start Shutdown Control 500kHz Version Uses Small Inductor

SEPIC Constant-Current/Constant-Voltage Battery Charger Features: Charger Input Voltage May Be Higher, Equal to or Lower Than Battery Voltage Charges Any Number of Cells Up to 30V* 1% Voltage Accuracy for Rechargeable Lithium Batteries 500kHz Switching Frequency Minimizes Inductor Size 100mV Current Sense Voltage for High Efficiency Battery Can Be Directly Grounded Charging Current Easily Programmable or Shut Down*Maximum Input Voltage = 40V VBAT

12 Channel Multicell Battery Monitor Features: Measures up to 12 battery cells in series Maximum lifetime total measurement error: 1.5 mV Stackable architecture for high voltage battery packs Built-in isoSPI interface 2 Mb isolated serial communications Uses a single twisted pair, up to 20 meters Low EMI susceptibility and emissions Bidirectional for broken wire protection Capacitor or transformer coupled ADBMS6815WFS models designed for use in ISO 26262 applications for Automotive Safety Integrity Level Capability D (ASIL D) ADBMS6815M includes LPCM for Cell & Temperature Monitoring in Key-off State Hot plug tolerant without external protection Diagnostics for IC and application circuit failure modes 304 μs to measure all cells in a system 16-bit ADC with programmable noise filter Passive cell balancing up to 300 mA per channel with programmable PWM 7 GPIO or analog inputs Temperature or other sensor inputs Configurable as an I2C or SPI master Sleep state supply current: 5.5 μA 48-lead LQFP package with exposed pad AEC-Q100 qualified for automotive applications

SEALED LEAD ACID 12V 36AH; Battery Voltage:12V; Battery Size Code:-; Battery Technology:Lead Acid; Battery Capacity:36mAh; Battery Terminals:Quick Connect; External Diameter:-; External Height:94mm; External Width:64.5mm ;RoHS Compliant: NA

Power Tracking 2A Battery Charger Features: Input Supply Voltage Regulation Loop for Peak Power Tracking in (MPPT) Solar Applications Wide Input Voltage Range: 4.95V to 34V (40V Abs Max) Programmable Charge Rate Up to 2A User Selectable Termination: C/10 or On-Board Termination Timer Resistor Programmable Float Voltage Up to 18V Accommodates 4-Cell Li-Ion/Polymer, 5-Cell LiFePO4, Lead-Acid Chemistries Parallelable for Higher Output Current 1MHz Fixed Frequency 0.5% Float Voltage Reference Accuracy 5% Charge Current Accuracy 2.5% C/10 Detection Accuracy Binary-Coded Open-Collector Status Pins Thermally Enhanced 3mm × 3mm DFN and MSE Packages