Dual, 300 mA Fixed Output, Low Noise, High PSRR Voltage Regulator Features: Input voltage range: 2.5 V to 5.5 V Small, 8-lead, 2 mm x 2 mm LFCSP package Initial accuracy: ±1% High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V Excellent transient response Low dropout voltage: 170 mV at 300 mA load 65 μA typical ground current at no load, both LDOs enabled Overcurrent and thermal protection

Dual, 300 mA Fixed Output, Low Noise, High PSRR Voltage Regulator Features: Input voltage range: 2.5 V to 5.5 V Small, 8-lead, 2 mm x 2 mm LFCSP package Initial accuracy: ±1% High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V Excellent transient response Low dropout voltage: 170 mV at 300 mA load 65 μA typical ground current at no load, both LDOs enabled Overcurrent and thermal protection

Low Cost, Low Power, True RMS-to-DC Converter Features: Delivers true rms or average rectified value of ac waveform Fast settling at all input levels Accuracy: ±10 μV ± 0.25% of reading (B grade) Wide dynamic input range  100 μV rms to 3 V rms (8.5 V p-p) full-scale input range  Larger inputs with external scaling Wide bandwidth: 1 MHz for −3 dB (300 mV)  65 kHz for additional 1% error Zero converter dc output offset No residual switching products Specified at 300 mV rms input  Accurate conversion with crest factors up to 10  Low power: 300 μA typical at ±2.4 V  High-Z FET separately powered input buffer RIN ≥ 1012 Ω, CIN ≤ 2 pF  Precision dc output buffer  Wide power supply voltage range Dual: ±2.4 V to ±18 V; single: 4.8 V to 36 V 4 mm × 4 mm LFCSP and 8 mm × 6 mm QSOP packages ESD protected

Low Cost, Low Power, True RMS-to-DC Converter

350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator

+2.5V Low-Power Precision Voltage Reference

Demonstration circuit 2910A is low VIN, high efficiency, and dual 2A output µModule DC/DC converter. The board operates by default at a fixed 2MHz and can be synchronized from 1MHz to 3MHz via the MODE/SYNC pin. With its high switching frequency and current mode architecture, a fast transient response to line and load changes is possible without sacrificing stability. The DC2910A can be used in forced continuous mode or pulse skip mode for low noise, or in burst mode operation for high efficiency at light loads. The demo board features the LTM4691, which is available in a low profile 3mm x 4mm x 1.2mm LGA package. Please see the LTM4691 datasheet for more detailed information. It is recommended to read the data sheet for the LTM4691 prior to making any changes to the DC2910A.

DC671A: Demo Board for the LTC4257-1 IEEE 802.3af PD Power over Ethernet Interface Controller with Dual Current Limit.

The LTC3426 step-up switching regulator generates an output voltage of up to 5.5V from an input voltage as low as 1.6V. Ideal for applications where space is limited, it switches at 1.2MHz, allowing the use of tiny, low cost and low profile external components. Its internal 2A, 100m? NMOS switch provides high efficiency even at heavy load, while the constant frequency, current mode architecture results in low, predictable output noise that is easy to filter.Anti-ringing circuitry reduces EMI concerns by damping the inductor while in discontinuous mode, and internal soft-start eases inrush current worries. Internal frequency compensation is designed to accommodate ceramic output capacitors, further reducing noise. The device features very low shutdown current of 0.5?A.The LTC3426 is available in the 6-lead SOT-23 package.Protected by U.S. Patents, including 6498466, 6611131Applications White LED Driver Supply Local 3.3V or 5V Supply Battery Back-Up

DC740A-A: Demo Board for the LTC2922 Power Supply Tracker with Input Monitors.