LDO, FIXED, 1.8V, 0.2A, TSOT-5;

LDO, ADJ, 40V, 0.2A, TSOT-6;

Compact, 600 mA, 3 MHz, Step-Down DC-to-DC Converter Features: Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 18 μA Maximum load current: 600 mA Input voltage: 2.3 V to 5.5 V Uses tiny multilayer inductors and capacitors Current mode architecture for fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier Internal soft start See data sheet for additional Information

20 V, 500 mA, Low Noise LDO Regulator with Soft Start Features: Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 μV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −2% to +1%, TJ = −40°C to +125°C −1.25% to +1%, TJ = 0°C to +85°C Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 μA at VIN = 12 V, stable with small 1 μF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.22 V to 19 V Programmable soft start for inrush current control Foldback current-limit and thermal overload protection User programmable precision UVLO/enable Power-good indicator 8-lead LFCSP and 8-lead SOIC packages

Supervisory Circuit with Watchdog, Manual Reset, and Active-Low/High Push-Pull Features: 26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) 4 watchdog timeout options 6.3 ms, 102 ms, 1600 ms, and 25.6 sec (typical) Manual reset input Reset output stages Push-pull active low Open-drain active low Push-pull active high Low power consumption: 5 μA Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over industrial temperature range 5-lead SOT-23 package

2 A, Low VIN, Low Noise, CMOS Linear Regulator Features: 2 A maximum output current Low input voltage supply range VIN = 1.10 V to 1.98 V, no external bias supply required Fixed output voltage range: VOUT_FIXED = 0.9 V to 1.5 V Adjustable output voltage range: VOUT_ADJ = 0.5 V to 1.5 V Ultralow noise: 2 μV rms, 100 Hz to 100 kHz Noise spectral density 4 nV/√Hz at 10 kHz 3 nV/√Hz at 100 kHz Low dropout voltage: 62 mV typical at 2 A load Operating supply current: 4.5 mA typical at no load ±1.5% fixed output voltage accuracy over line, load, and temperature Excellent power supply rejection ratio (PSRR) performance 62 dB typical at 10 kHz at 2 A load 46 dB typical at 100 kHz at 2 A load Excellent load/line transient response Soft start to reduce inrush current Optimized for small 10 μF ceramic capacitors Current-limit and thermal overload protection Power-good indicator Precision enable 16-lead, 3 mm × 3 mm LFCSP package AEC-Q100 qualified for automotive applications

DC / DC CONTROLLERS

Switching Voltage Regulators 3A Fixed CL Boost 0.65/1.3MHz

Dual, 300 mA Fixed Output, Low Noise, High PSRR Voltage Regulator Features: Input voltage range: 2.5 V to 5.5 V Small, 8-lead, 2 mm x 2 mm LFCSP package Initial accuracy: ±1% High PSRR: 70 dB at 10 kHz, 60 dB at 100 kHz, 40 dB at 1 MHz Low noise: 27 μV rms at VOUT = 1.2 V, 50 μV rms at VOUT = 2.8 V Excellent transient response Low dropout voltage: 170 mV at 300 mA load 65 μA typical ground current at no load, both LDOs enabled Overcurrent and thermal protection

Supervisory Circuit with Manual Reset and Active-High/Push-Pull Active-Low/Push-Pull Features: 26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) 4 watchdog timeout options 6.3 ms, 102 ms, 1600 ms, and 25.6 sec (typical) Manual reset input Reset output stages Push-pull active low Open-drain active low Push-pull active high Low power consumption: 5 μA Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over industrial temperature range 5-lead SOT-23 package