Ultrathin 1.5A Module Thermoelectric Cooler (TEC) Regulator Features:Built-in Two Zero-Drift, Rail-to-Rail Chopper Amplifiers2.7V to 5.5V Input Voltage Range1.5A Driving Capability1% Accuracy 2.5V Internal Reference OutputIndependent Programmable Heating and Cooling Current LimitTEC Voltage and Current MonitoringProgrammable Maximum TEC VoltageDefault 2MHz Switching FrequencySynchronization from 1.85MHz to 3.25MHzCapable of NTC, PTC and RTD Thermal Sensors3.5mm 4mm 1.3mm LGA Package

High Voltage High Current Hot Swap Controller Features: Allows Safe Board Insertion into Live Backplane Wide Operating Voltage Range: 6.5V to 80V Drives Two Gates for High Power Applications Configurable Parallel, Staged Start or Single MOSFET Modes Adjustable Precision Current Limit: 6mV to 20mV Current Foldback Limits MOSFET Power SOA Timer Optimizes MOSFET Capability Monitors VGS and VDS for MOSFET Health 12V Gate Drive for Lower MOSFET RDS(ON) Parallelable Controllers for Very High Current Levels Available in 24-Lead Narrow SSOP and 24-Pin 4mm × 5mm QFN Packages

40V Low IQ, 3MHz Dual, 2-Phase Synchronous Step-Down Controller with Spread Spectrum Features: Wide Input Voltage Range: 4.5V to 40V Wide Output Voltage Range: 0.8V to 99% • VIN Low Operating IQ: 14μA (14V to 3.3V, Channel 1 On) Spread Spectrum Operation RSENSE or DCR Current Sensing Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise Programmable Fixed Frequency (100kHz to 3MHz) Phase-Lockable Frequency (100kHz to 3MHz) Selectable Continuous, Pulse-Skipping, or Low Ripple, Burst Mode® Operation at Light Loads Very Low Dropout Operation: 99% Duty Cycle Power Good Output Voltage Monitors Output Overvoltage Protection Internal LDO Powers Gate Drive from VIN or EXTVCC Low Shutdown IQ: 1.5μA Small 28-Lead 4mm × 5mm QFN Package AEC-Q100 Qualified for Automotive Applications

40V, 7A Ideal Diode Features: Reduces Power Dissipation by Replacing a Power Schottky Diode with No External Components Internal 7A, 21mΩ N-Channel MOSFET 15mV Regulated Forward Voltage 20μA Operating Current, 0.8μA Shutdown Wide 0V to 40V Input Range with VCC > 2.75V Fast Turn-On Minimizes Voltage Droop Fast Reverse Recovery Time Minimizes Reverse Transient Current Smooth Switchover in Diode-OR Applications 16-Lead 2mm × 3mm LQFN Package

Ultrathin Low VIN, 2A Buck-Boost Module Regulator Features: Wide Input Voltage Range: 2.6V to 5.5V Adjustable Output Voltage Range: 1.8V to 5.5V 2A of Continuous Output Current with VIN ≥ VOUT (Buck Mode and Buck-Boost Mode); Minimum 1A Continuous Output Current with VIN < VOUT (Boost Mode). Low Ripple Buck-Boost Architecture Programmable Soft-Start and VIN UVLO Burst Mode IQ 15μA for High Efficiency at Light Loads Ultrathin, Small Surface Mount Footprint 3.5mm × 4mm × 1.25mm LGA Package

42V, 5A/7A Peak Synchronous Step-Down Silent Switcher with 2.5A Quiescent Current Features: Silent Switcher® Architecture Ultralow EMI Emissions Optional Spread Spectrum Modulation High Efficiency at High Frequency Up to 96% Efficiency at 1MHz, 12VIN to 5VOUT Up to 95% Efficiency at 2MHz, 12VIN to 5VOUT Wide Input Voltage Range: 3.4V to 42V 5A Maximum Continuous, 7A Peak Transient Output Ultralow Quiescent Current Burst Mode® Operation 2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P Fast Minimum Switch On-Time: 30ns Low Dropout Under All Conditions: 100mV at 1A Forced Continuous Mode Adjustable and Synchronizable: 200kHz to 3MHz Output Soft-Start and Power Good Small 20-Lead 4mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications

36V 10W No-Opto Isolated Flyback Converter Features: 4V to 36V Input Voltage Range 3.6A, 65V Internal DMOS Power Switch Low Quiescent Current Quasi-Resonant Boundary Mode Operation at Heavy Load Low Ripple Burst Mode® Operation at Light Load Minimum Load < 0.5% (Typ) of Full Output No Transformer Third Winding or Opto-Isolator Required for Output Voltage Regulation Accurate EN/UVLO Threshold and Hysteresis Temperature Compensation for Output Diode Output Short-Circuit Protection Thermally Enhanced 8-Lead SO Package

Micropower, Regulated Charge Pump DC/DC Converters Features: 5V Output Current: 100mA (VIN ≥ 3V) 3.3V Output Current: 80mA (VIN ≥ 2.5V) Ultralow Power: 20µA Quiescent Current Regulated Output Voltage: 3.3V ±4%, 5V ±4%, ADJ VIN Range: 2V to 5.5V 800kHz Switching Frequency No Inductors Very Low Shutdown Current: <2µA Shutdown Disconnects Load from VIN PowerGood/Undervoltage Output Adjustable Soft-Start Time Short-Circuit/Thermal Protection Available in 8-Pin MSOP

Low Emission Isolated DC to DC Converter Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM5020 60 mA output current for ADuM5028 Meets CISPR22 Class B emissions limits at full load on a 2-layer PCB 16-lead SOIC_W package with 7.8 mm minimum creepage 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition (pending) 3000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011 (pending) 

Low Emission, 5 kV Isolated DC-to-DC Converters Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM6020 AEC-Q100 qualified for automotive applications Meets CISPR22 Class B emissions limits at full load on a 2layer PCB 16-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011