Single Switch Synchronous Forward Controller Features: Synchronous Rectifier Control for High Efficiency Programmable Volt-Second Clamp Output Power Levels from 25W to 500W Low Current Start-Up (LT1952: 460µA; VIN On/Off = 14.25V/8.75V) (LT1952-1: 400µA; VIN On/Off = 7.75V/6.5V) True PWM Soft-Start Low Stress Short Circuit Protection Precision 107mV Current Limit Threshold Adjustable Delay for Synchronous Timing Accurate Shutdown Threshold with Programmable Hysteresis Programmable Slope Compensation Programmable Leading Edge Blanking Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock up to 1.5 • fOSC Internal 1.23V Reference 2.5V External Reference Current Mode Control Small 16-Pin SSOP Package

Multiple Supply Hot Swap Controller with I2C Compatible Monitoring Features: Allows Safe Insertion into Live CompactPCI™ or PCI Express™ Backplane 8-Bit ADC Monitors Current and Voltage I2C™/SMBus Interface dI/dt Controlled Soft Start Simultaneous or Sequenced Turn-On ±20V Absolute Maximum Rating for ±12V Supplies No External Gate Capacitor Required Dual-Level Circuit Breaker and Current Limit Bus Precharge Output Power Good Input with Timeout Optional Latch-off or Autoretry After Faults Alerts Host After Faults Integrated LOCAL_PCI_RST# Logic 36-Pin SSOP and 38-Pin (5mm × 7mm) QFN Packages

High Performance, Multiphase Energy, and Power Quality Measurement IC Features: 7 high performance ADCs 101 dB SNR Wide input voltage range: ±1 V, 707 mV rms FS at gain = 1 Differential inputs ±25 ppm/°C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10000:1 dynamic input range Class 0.2 metrology with standard external components Power quality measurements Enables implementation of IEC 61000-4-30 Class S VRMS ½, IRMS ½ rms voltage refreshed each half cycle 10 cycle rms/12 cycle rms Dip and swell monitors Line frequency—one per phase Zero crossing, zero-crossing timeout Phase angle measurements Supports CTs and Rogowski coil (di/dt) sensors Multiple range phase/gain compensation for CTs Digital integrator for Rogowski coils Flexible waveform buffer Able to resample waveform to ensure 128 points per line cycle for ease of external harmonic analysis Events, such as dip and swell, can trigger waveform storage Simplifies data collection for IEC 61000-4-7 harmonic analysis Advanced metrology feature set Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour Total and fundamental IRMS, VRMS Total harmonic distortion Power factor Supports active energy standards: IEC 62053-21 and IEC 62053-22; EN50470-3; OIML R46; and ANSI C12.20 Supports reactive energy standards: IEC 62053-23, IEC 62053-24 High speed communication port: 20 MHz serial port interface (SPI) Integrated temperature sensor with 12-bit successive approximation register (SAR) ADC ±3°C accuracy from −40°C to +85°C

18-Cell Battery Monitor with Daisy Chain Interface Features: Measures up to 18 battery cells in series 3 mV maximum total measurement error Stackable architecture for high voltage systems Built-in isoSPI interface 1 Mb isolated serial communications Uses a single twisted pair, up to 100 meters Low EMI susceptibility and emissions Bidirectional for broken wire protection 290 μs to measure all cells in a system Synchronized voltage and current measurement 16-bit Δ-Σ ADC with programmable third-order noise filter Passive cell balancing up to 200 mA (maximum) with programmable pulsewidth modulation 9 general purpose digital I/O or analog inputs Temperature or other sensor inputs Configurable as an I2C or SPI master 6 μA sleep mode supply current 64-lead LQFP_EP package

60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller Features: Wide VIN Range: 4.5V to 60V (65V Abs Max) Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 99% • VIN Adjustable Gate Drive Level 5V to 10V (OPTI-DRIVE) No External Bootstrap Diodes Required Low Operating IQ: 29μA (One Channel On) Selectable Gate Drive UVLO Thresholds Out-of-Phase Operation Reduces Required Input Capacitance and Power Supply Induced Noise Phase-Lockable Frequency: 75kHz to 850kHz Selectable Continuous, Pulse Skipping or Low Ripple Burst Mode® Operation at Light Loads Selectable Current Limit (LTC3892/LTC3892-2) Very Low Dropout Operation: 99% Duty Cycle Power Good Output Voltage Monitors (LTC3892/LTC3892-2) Low Shutdown IQ: 3.6μA Small 32-Lead 5mm × 5mm QFN Package (LTC3892/LTC3892-2) or TSSOP Package (LTC3892-1)

Dual Channel 2A, 42V,Synchronous Step-Down Silent Switcher 2with 6.2A Quiescent Current Features: Silent Switcher®2 Architecture: Ultralow EMI on Any PCB Eliminates PCB Layout Sensitivity Internal Bypass Capacitors Reduce Radiated EMI Optional Spread Spectrum Modulation 2A DC from Each Channel Simultaneously Up to 3A on Either Channel Ultralow Quiescent Current Burst Mode® Operation: 6.2μA IQ Regulating 12VIN to 5VOUT1 and 3.3VOUT2 Output Ripple < 10mVP–P Optional External VC Pin: Fast Transient Response Forced Continuous Mode High Efficiency at High Frequency 94.1% Efficiency at 1A, 5VOUT from 12VIN at 2MHz Pin-Selectable Fixed Output Voltages: 5V, 3.3V, 1.8V Fast Minimum Switch-On Time: 30ns Wide Input Voltage Range: 3.0V to 42V Adjustable and Synchronizable: 300kHz to 3MHz Fixed Output Pin Strap Options Internal 2MHz fSW with Fast Internal Compensation Small 4mm × 3mm 20-Pin LQFN Package AEC-Q100 Qualified for Automotive Applications

Single Port PoE/PoE+/LTPoE++ PSE Controller Features: Compliant with IEEE 802.3at Type 1 and 2 Supports LTPoE++® Up to 90W Supports Dual-Signature PDs Fully Autonomous Operation without Microcontroller Very Low Power Dissipation 0.1Ω Sense Resistance Low RDS(ON) External MOSFET Very High Reliability 4-Point PD Detection 2-Point Forced Voltage and Forced Current Robust Short-Circuit Protection Cable Surge Protected ±80V OUT pin Classification Dependent ICUT and ILIM Current Thresholds Supports 2-Pair and 4-Pair Output Power UltraPWR Mode Supports Custom PDs up to 123W Pin-Selectable Detection Backoff Timer for Midspans Pin Programmable Legacy PD Detection Pin Programmable Maximum Power Mode Status LED Pin Available in 20-Pin QFN and 16-Pin SO Packages

25A, Dual PolyPhase Regulator with Digital Power System Management Features: PMBus/I2C Compliant Serial Interface Telemetry Read-Back Includes VIN, IIN, VOUT, IOUT, Temperature and Faults Programmable Voltage, Current Limit, Digital Soft-Start/Stop, Sequencing, Margining, OV/UV/OC Sub-Milliohm DCR Current Sensing Digitally Adjustable Loop Compensation Parameters 0.5% Output Voltage Accuracy Over Temperature Integrated Input Current Sense Amplifier Internal EEPROM with ECC and Fault Logging Integrated N-Channel MOSFET Gate Drivers

High Voltage Buck-Boost Battery ChargeController with Maximum Power PointTracking (MPPT) and I2C Features: VIN Range: 6V to 80V VBAT Range: 1.3V to 80V Single Inductor Allows VIN Above, Below, or Equal to VBAT Automatic MPPT for Solar Powered Charging Automatic Temperature Compensation I2C Telemetry and Configuration Internal EEPROM for Configuration Storage Operation from Solar Panel or DC Supply Four Integrated Feedback Loops Synchronizable Fixed Frequency: 100kHz to 400kHz 64-Lead (7mm × 11mm × 0.75mm) QFN Package

Ultrathin Dual 10A or Single 20A Module Regulator with Digital Power System Management Features: Dual, Fast, Analog Loops with Digital Interface for Control and Monitoring Output Voltage Range: 0.5V to 3.6V ±0.5% Maximum DC Output Error Over Temperature 10A DC Typical, 12A Peak Output Current, per Channel ±5% Current Readback Accuracy at 10A Load 400kHz PMBus-Compliant I2C Serial Interface Integrated 16-Bit Σ ADC Supports Telemetry Polling Rates Up to 125Hz Constant Frequency Current Mode Control Parallel and Current Share Multiple Modules All 7-Bit Slave Addresses Supported Drop-In Pin-Compatible to Dual 9A LTM4675 and Dual 13A LTM4676A and Dual 18A LTM4677 16mm × 11.9mm × 1.82mm LGA PackageReadable Data: Input and Output Voltages, Currents, and Temperatures Running Peak Values, Uptime, Faults and Warnings Onboard EEPROM Fault Log Record with ECCWritable Data and Configurable Parameters: Output Voltage, Voltage Sequencing and Margining Digital Soft-Start/Stop Ramp OV/UV/OT, UVLO, Frequency and Phasing