The MAX15004/MAX15005 high-performance, current-mode PWM controllers operate at an automotive input voltage range from 4.5V to 40V (load dump). The input voltage can go lower than 4.5V after startup if IN is bootstrapped to a boosted output voltage. The controllers integrate all the building blocks necessary for implementing fixed-frequency isolated/nonisolated power supplies. The general-purpose boost, flyback, forward, and SEPIC converters can be designed with ease around the MAX15004/MAX15005.The current-mode control architecture offers excellent line-transient response and cycle-by-cycle current limit while simplifying the frequency compensation. Programmable slope compensation simplifies the design further. A fast 60ns current-limit response time, low 300mV current-limit threshold makes the controllers suitable for high-efficiency, high-frequency DC-DC converters. The devices include an internal error amplifier and 1% accurate reference to facilitate the primary-side regulated, single-ended flyback converter or nonisolated converters.An external resistor and capacitor network programs the switching frequency from 15kHz to 500kHz (1MHz for the MAX15005). The MAX15004A/MAX15005 provide a SYNC input for synchronization to an external clock. The maximum FET-driver duty cycle for the MAX15004A/B/C/D is 50%. The maximum duty cycle can be set on the MAX15005A/B/C/D by selecting the right combination of RT and CT.The input undervoltage lockout (ON/active-low OFF) programs the input-supply startup voltage and can be used to shutdown the converter to reduce the total shutdown current down to 10µA. Protection features include cycle-by-cycle and hiccup current limit, output overvoltage protection, and thermal shutdown.The MAX15004/MAX15005 are available in space-saving 16-pin TSSOP and thermally enhanced 16-pin TSSOP-EP packages. All devices operate over the -40°C to +125°C automotive temperature range.ApplicationsAutomotiveIsolated Flyback, Forward, Nonisolated SEPIC, Boost ConvertersVacuum Fluorescent Display (VFD) Power Supply

The MAX15009 includes a 300mA LDO regulator, a switched output, and an overvoltage protection (OVP) controller to protect downstream circuits from high-voltage load dump. The MAX15011 includes only the 300mA LDO regulator and switched output. Both devices operate over a wide supply voltage range from 5V to 40V and are able to withstand load-dump transients up to 45V. The MAX15009/MAX15011 feature short-circuit and thermalshutdown protection.The 300mA LDO regulator consumes 67µA quiescent current at light loads and is well suited to power battery applications. The LDO features independent enable and hold inputs, as well as a microprocessor (µP) reset output with adjustable reset timeout period.The switched output of the MAX15009/MAX15011 incorporates a low RDS(ON) (0.28Ω, typ) pass transistor switch internally connected to the output of the LDO regulator. This switch features accurate current-limit sensing circuitry and is capable of controlling remote loads. The MAX15009/MAX15011 feature an adjustable current limit and a programmable delay timer to set the overcurrent detection blanking time of the switch and autoretry timeout.The MAX15009 OVP controller operates with an external enhancement mode n-channel MOSFET. While the monitored voltage remains below the adjustable threshold, the MOSFET stays on. When the monitored voltage exceeds the OVP threshold, the OVP controller quickly turns off the external MOSFET. The OVP controller is configurable as a load-disconnect switch or a voltage limiter.The MAX15009/MAX15011 are available in a thermally enhanced, 32-pin (5mm x 5mm), TQFN package and are fully specified over the -40°C to +125°C automotive operating temperature range.ApplicationsMultimedia Power Supply

Switching Voltage Regulators 1.8V INPUT PWM STP UPG 10LD

LDO Voltage Regulators

Switching Voltage Regulators 3A Voltage Mode Synchronous Buck PWM

Linear Voltage Regulators 5V 500mA Positive

Power Switch ICs - Power Distribution An Adjustable Turn-on Time, 5 m , 4 A Ultra Low Power Switch with Fast Discharge

4-Channel Power Management IC with PWM Buck Controller and 3 Adjustable Synchronous Buck Regulators 7V to 26V 32-Pin FC-MQFN T/R

Integrated Power Switch 20V 50mOhm 3A 18-Pin STQFN

Power Switch ICs - Power Distribution Ultra-small 14.6 mOhm 1.0 A GreenFET 3 Power Switch with Discharge and Reverse Blocking