Wideband IQ Demodulator with IIP2 and DC Offset Control Features: 400MHz to 4GHz Operating Frequency High IIP3: 28.7dBm at 700MHz, 25.7dBm at 1.95GHz High IIP2: 70dBm at 700MHz, 60dBm at 1.95GHz User Adjustable IIP2 Up to 80dBm User Adjustable DC Offset Null High Input P1dB: 16dBm at 1950MHz I/Q Bandwidth of 530MHz or Higher Image Rejection: 43dB at 1950MHz Noise Figure: 13.5dB at 700MHz  12.7dB at 1.95GHz Conversion Gain: 2.0dB at 700MHz  2.4dB at 1.95GHz Single-Ended RF with On-Chip Transformer Shutdown Mode Operating Temperature Range (TC): –40°C to 105°C 24-Lead 4mm × 4mm QFN Package

300MHz to 4GHz Active Downconverting Mixer with Wideband IF Features: High IIP3: +26.9dBm at 1950MHz 1.9dB Conversion Gain Low Noise Figure: 11.8dB at 1950MHz 16.5dB NF Under 5dBm Blocking Low Power: 294mW Wide IF Frequency Range Up to 2.5GHz LO Input 50Ω Matched when Shutdown –40°C to 105°C Operation (TC) Very Small Solution Size Pin Compatible with LT5557 16-Lead (4mm × 4mm) QFN package

1.6GHz to 2.7GHz High Dynamic Range Downconverting Mixer Features: Conversion Gain: 8dB at 2.4GHz IIP3: 26.8dBm at 2.4GHz Noise Figure: 9.9dB at 2.4GHz 17.3dB NF Under +5dBm Blocking High Input P1dB 3.3V Supply, 660mW Power Consumption Shutdown Pin 50Ω Single-Ended RF and LO Inputs LO Inputs 50Ω Matched when Shutdown High Isolation LO Switch 0dBm LO Drive Level High LO-RF and LO-IF Isolation Small Solution Size 20-Lead (5mm × 5mm) QFN package

GaAs, pHEMT, MMIC,1/2 W, 20 GHz to 44 GHz, Power Amplifier Features: Output P1dB: 28 dBm (typical at 34 GHz to 44 GHz) PSAT: 30 dBm (typical at 20 GHz to 34 GHz) Gain: 15 dB (typical at 34 GHz to 44 GHz) IP3: 40 dBm (typical) Supply voltage: 5 V at 600 mA Die size: 2.75 mm × 1.805 mm × 0.1 mm

18 GHz to 44 GHz, GaAs, pHEMT, 32 dBm (>1 W), MMIC Power Amplifier Features:ADPA7005AEHZ Output P1dB: up to 31 dBm typical PSAT: up to 32 dBm typical Gain: up to 15.5 dB typical Output IP3: up to 42.5 dBm typical Supply voltage: 5 V at 1400 mA 50 matched input/output 18-terminal, 7 mm × 7 mm LCC_HS package Integrated power detectorADPA7005CHIP Output P1dB: 31 dBm typical at 20 GHz to 34 GHz PSAT: 32 dBm typical at 20 GHz to 34 GHz Gain: 17 dB typical at 20 GHz to 34 GHz Output IP3: 41 dBm typical at 20 GHz to 34 GHz Supply voltage: 5 V at 1200 mA maximum 50 Ω matched input/output Die size: 3.75 mm × 3.47 mm × 0.1 mm

10.1 GHz to 11.7 GHz, Low Noise Amplifier Features: Frequency range: 10.1 GHz to 11.7 GHz Typical gain of >24 dB Low noise input Noise figure 2.2 dB typical at 10.1 GHz 2.3 dB typical at 11.7 GHz High linearity input ≥2.2 dBm typical input third-order intercept (IIP3) −10 dBm typical input 1 dB compression point (P1dB) Matched 50 Ω single-ended input Matched 100 Ω differential outputs 8-lead, 2.00 mm × 2.00 mm LFCSP microwave packaging

2 dB LSB, 4-Bit, Silicon Digital Attenuator, 100 MHz to 40 GHz Features: Ultrawideband frequency range: 100 MHz to 40 GHz Attenuation range: 2 dB steps to 30 dB Low insertion loss 1.7 dB to 18 GHz 2.2 dB to 26 GHz 3.5 dB to 40 GHz Attenuation accuracy ±(0.1 + 2.0%) of attenuation state up to 18 GHz ±(0.2 + 2.5%) of attenuation state up to 26 GHz ±(0.5 + 10.0%) of attenuation state up to 40 GHz High RF input power handling: 26 dBm average, 30 dBm peak Tight distribution in relative phase Typical step error ±0.15 dB to 18 GHz ±0.20 dB to 26 GHz ±0.60 dB to 40 GHz High input linearity P0.1dB insertion loss state: 30 dBm P0.1dB other attenuation states: 26 dBm IP3: 50 dBm typical No low frequency spurious signals SPI and parallel mode control, CMOS/LVTTL compatible RF amplitude settling time (0.1 dB of final RF output): 230 ns 2.5 mm × 2.5 mm, 16-terminal LGA package Pin compatible with ADRF5721, low frequency cutoff version

RF Amplifier 5-300MHz NF 5.8dB Gain 25.5dB

Ethernet Modules iMcVGiga-FiberLinXII TX+FX-CWDM-SM1610-SC

Attenuators Attenuator,Die,16dB