Single-Channel, 3 V Front-End Processor for General Purpose Applications Including Speech and Telephony Features: 16-Bit A/D Converters 16-Bit D/A Converters Programmable Input/Output Sample Rates 75 dB ADC SNR 70 db DAC SNR 64 ksps Maximum Sample Rate -90 db Crosstalk Programmable Input/Output Gain Low group Delay (25 µs per ADC ch, 50 µs per DAC ch) Flexible Serial Port Allows Up to 4 Codecs To Be Connected in Cascade Giving 8 I/O Channels Single 2.7 V to 3.3 V Supply Operation 50 mW Max Power Dissipation at 2.7 V 20-Lead SOIC/SSOP/TSSOP Packages

CMOS, 12-Bit Serial DACPORT Features: 12-Bit CMOS DAC with On-Chip Voltage Reference Output Amplifier Three Selectable Output Ranges -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V Serial Interface 300 kHz DAC Update Rate Small Size: 16-Lead DIP or SOIC Nonlinearity: ±1/2 LSB Tmin to Tmax Low Power Dissipation: 100 mW Typical  

Quad, 16-Bit, 2.4 GSPS, TxDAC+ Digital-to-Analog Converter Features: Supports input data rates up to 1 GSPS Proprietary, low spurious and distortion design Single carrier LTE 20 MHz bandwidth (BW), ACLR = 77 dBc at 180 MHz IF Six carrier GSM IMD = 78 dBc, 600 kHz carrier spacing at 180 MHz IF SFDR = 72 dBc at 180 MHz IF, −6 dBFS single tone Flexible 8-lane JESD204B interface Multiple chip synchronization Fixed latency Data generator latency compensation Input signal power detection High performance, low noise phase-locked loop (PLL) clock multiplier Digital inverse sinc filter Digital quadrature modulation using a numerically controlled oscillator (NCO) Nyquist band selection—mix mode Selectable 1×, 2×, 4×, and 8× interpolation filters Low power: 2.11 W at 1.6 GSPS, full operating conditions 88-lead, exposed pad LFCSP

DC to 9 GHz, Vector Signal Generator Features: DC-coupled, 50 matched output Up to 4.3 dBm output power, 9.5 dBm at 9 GHz DAC core update rate: 12.0 GSPS (guaranteed minimum) in 2 NRZ mode Wide analog bandwidth DC to 9.0 GHz in 2 NRZ mode (12.0 GSPS DAC update rate) 1.0 GHz to 8.0 GHz in mix mode (6.0 GSPS DAC update rate) DC to 4.5 GHz in NRZ mode (6.0 GSPS DAC update rate) Power dissipation of 4.88 W in 2 NRZ mode (10 GSPS DAC update rate) Bypassable datapath interpolation 2, 3, 4, 6, 8, 12, 16, 24 Instantaneous (complex) signal bandwidth 2.25 GHz with device clock at 5 GHz (2 interpolation) 1.8 GHz with device clock at 6 GHz (3 interpolation) Fast frequency hopping Integrated biCMOS buffer amplifier

Dual, 16-Bit, 12.6 GSPS RF DAC with Channelizers Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 1.54 GSPS maximum complex input data rate per input channel 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD = −83 dBc at 1.8 GHz, −7 dBFS/tone RF output SFDR < −80 dBc at 1.8 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1 Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.55 W at 12 GSPS, dual channel mode 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

Dual, 16-Bit, 12.6 GSPS RF DAC and Direct Digital Synthesizer Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 3.08 GSPS maximum complex input data rate per input channel 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD3 = −83 dBc at 1.84 GHz, −7 dBFS/tone RF output SFDR <−80 dBc at 1.84 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1 Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.54 W with 2 DACs at 12 GSPS, DAC PLL on 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

Dual, 11-Bit/16-Bit, 12.6 GSPS RF DAC with Wideband Channelizers Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 3.08 GSPS maximum complex input data rate per input channel, 11-bit resolution 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD3 = −83 dBc at 1.84GHz, −7 dBFS/tone RF output SFDR <−80 dBc at 1.84 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1  Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.54 W with 2 DACs at 12 GSPS, DAC PLL on 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

Dual, 11-Bit/16-Bit, 12.6 GSPS RF DAC with Wideband Channelizers Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 3.08 GSPS maximum complex input data rate per input channel, 11-bit resolution 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD3 = −83 dBc at 1.84GHz, −7 dBFS/tone RF output SFDR <−80 dBc at 1.84 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1  Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.54 W with 2 DACs at 12 GSPS, DAC PLL on 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

Dual, 16-Bit, 12.6 GSPS RF DAC with Wideband Channelizers Features: Supports multiband wireless applications 3 bypassable, complex data input channels per RF DAC 3.08 GSPS maximum complex input data rate per input channel 1 independent NCO per input channel Proprietary, low spurious and distortion design 2-tone IMD3 = −83 dBc at 1.84GHz, −7 dBFS/tone RF output SFDR <−80 dBc at 1.84 GHz, −7 dBFS RF output Flexible 8-lane, 15.4 Gbps JESD204B interface Supports single-band and multiband use cases Supports 12-bit high density mode for increased data throughput Multiple chip synchronization Supports JESD204B Subclass 1 Selectable interpolation filter for a complete set of input data rates 1×, 2×, 3×, 4×, 6×, and 8× configurable data channel interpolation 1×, 2×, 4×, 6×, 8×, and 12× configurable final interpolation Final 48-bit NCO that operates at the DAC rate to support frequency synthesis up to 6 GHz Transmit enable function allows extra power saving and downstream circuitry protection High performance, low noise PLL clock multiplier Supports 12.6 GSPS DAC update rate Observation ADC clock driver with selectable divide ratios Low power 2.54 W with 2 DACs at 12 GSPS, DAC PLL on 10 mm × 10 mm, 144-ball BGA_ED with metal enhanced thermal lid, 0.80 mm pitch

12-Bit, 1 GSPS/500 MSPS JESD204B,Dual Analog-to-Digital Converter Features: JESD204B (Subclass 1) coded serial digital outputs 1.5 W total power per channel at 1 GSPS (default settings) SFDR 79 dBFS at 340 MHz (1 GSPS) 85 dBFS at 340 MHz (500 MSPS) SNR 63.4 dBFS at 340 MHz (AIN = −1.0 dBFS, 1 GSPS) 65.6 dBFS at 340 MHz (AIN = −1.0 dBFS, 500 MSPS) ENOB = 10.4 bits at 10 MHz (1 GSPS) DNL = ±0.16 LSB; INL = ±0.35 LSB (1 GSPS) Noise density −151 dBFS/Hz (1 GSPS) −150 dBFS/Hz (500 MSPS) 1.25 V, 2.5 V, and 3.3 V dc supply operation Low swing full-scale input 1.34 V p-p typical (1 GSPS) 1.63 V p-p typical (500 MSPS) No missing codes Internal ADC voltage reference Flexible termination impedance 400 Ω, 200 Ω, 100 Ω, and 50 Ω differential 2 GHz usable analog input full power bandwidth 95 dB channel isolation/crosstalk Amplitude detect bits for efficient AGC implementation Differential clock input Optional decimate by 2 DDC per channel Differential clock input Integer clock divide by 1, 2, 4, or 8 Flexible JESD204B lane configurations Small signal dither