Low Power 400MHz Blackfin+ Embedded Processor with 512KByte L2 SRAM Features: Blackfin+ core with up to 400 MHz performance Dual 16-bit or single 32-bit MAC support per cycle 16-bit complex MAC and many other instruction set enhancements Instruction set compatible with previous Blackfin product On-Chip Memory 136KB L1 SRAM with multi-parity-bit protection (64KB instruction, 64KB data, 8KB scratchpad) 512KByte on-chip L2 SRAM with ECC protection 512KByte On-chip L2 ROM Key Peripherals include USB2.0 HS OTG 2x CAN2.0B ePPI Video I/O 2x SPORTs (w/I2S) 2xQuad-SPI / 1xDual-SPI (w/ Host mode option) I2C 2xUART SD/SDIO/MMC (4-bit) Security and one-time-programmable memory Crypto hardware accelerators for fast secure boot/IP protection memDMA encryption/decryption for fast run-time security Low-cost packaging 88-Lead LFCSP (QFN) package (12 mm × 12mm), RoHS compliant Low system power with < 100 mW at 400 MHz (< 0.25 mW/MHz) at 25°C TJUNCTION

240MHz ARM Cortex-M4 with 13+ ENOB ADC, BGA212 Features: Dual 16 bit SAR ADCs with no missing codes, 13+ ENOB, 380ns conversion speed for high precision closed loop control. 240 MHz ARM Cortex M4 Core with Floating Point Unit to support advanced programming models and complex algorithms. 384KB SRAM and 2MB flash memory for large program size. Advanced PWM and timer functions for improved torque ripple and motor performance. SINC filters for glueless connection to AD74xx isolated converters. Harmonic Analysis Engine for compliant grid connection. Ethernet and USB to support networked interfaces. Two CAN interfaces, three UARTS, two SPIs, two SPORTs, eight 32-bit timers, two two-wire interfaces and four quadrature encoder interfaces. 16 bit asynchronous memory bus for external SRAM or FPGA interfacing. 212-ball, 19x19mm CSP_BGA package Up to 105C ambient operating temperature for support of industrial applications.

Single-core SHARC+ (w/384KB L1), arm Cortex-A5, 1MB Shared L2, 10/100 Ethernet, 176-LQFP Features: Dual-enhanced SHARC+ high performance floating-point cores Up to 500 MHz per SHARC+ core Up to 3 Mb (384 kB) L1 SRAM memory per core with parity (optional ability to configure as cache) 32-bit, 40-bit, and 64-bit floating-point support 32-bit fixed point Byte, short word, word, long word addressed arm® Cortex-A5 core 500 MHz/800 DMIPS with NEON/VFPv4-D16/Jazelle 32 kB L1 instruction cache with parity/32 kB L1 data cache with parity 256 kB L2 cache with parity Powerful DMA system On-chip memory protection Integrated safety features 17 mm × 17 mm 400-ball CSP_BGA and 176-lead LQFP_EP, RoHS compliant Low system power across automotive temperature rangeMemory Large on-chip L2 SRAM with ECC protection, up to 1 MB One L3 interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.5 V capable DDR3L devices), DDR2, or LPDDR1 SDRAM devicesAdditional Features Security and Protection Cryptographic hardware accelerators Fast secure boot with IP protection Support for arm® TrustZone Accelerators FIR, IIR offload engines Qualified for automotive applications

Single-core SHARC+ (w/384KB L1), arm Cortex-A5, 1MB Shared L2, 10/100 Ethernet, 176-LQFP Features: Dual-enhanced SHARC+ high performance floating-point cores Up to 500 MHz per SHARC+ core Up to 3 Mb (384 kB) L1 SRAM memory per core with parity (optional ability to configure as cache) 32-bit, 40-bit, and 64-bit floating-point support 32-bit fixed point Byte, short word, word, long word addressed arm® Cortex-A5 core 500 MHz/800 DMIPS with NEON/VFPv4-D16/Jazelle 32 kB L1 instruction cache with parity/32 kB L1 data cache with parity 256 kB L2 cache with parity Powerful DMA system On-chip memory protection Integrated safety features 17 mm × 17 mm 400-ball CSP_BGA and 176-lead LQFP_EP, RoHS compliant Low system power across automotive temperature rangeMemory Large on-chip L2 SRAM with ECC protection, up to 1 MB One L3 interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.5 V capable DDR3L devices), DDR2, or LPDDR1 SDRAM devicesAdditional Features Security and Protection Cryptographic hardware accelerators Fast secure boot with IP protection Support for arm® TrustZone Accelerators FIR, IIR offload engines Qualified for automotive applications

Dual-core SHARC+ and Arm Cortex-A5 SOC, DDR, Ethernet, USB, 349-cspBGA Features:SHARC+ Core Infrastructure: 500 MHz (3.0 GFLOPS) per core 5Mbits/640KB L1 memory/core with parity Optional cache/SRAM mode 32-bit, 40-bit & 64-bit floating point supportARM Core Infrastructure: 450 MHz ARM Cortex-A5 (with Neon/FPU) 32kByte/32kByte L1 Instr./Data Cache 256kByte L2 CacheShared System Memory: 256KB L2 SRAM with ECC protectionUp to Two High Speed Memory Controllers: DDR3-900, DDR2-800 & LPDDR (16-bit)Advanced Hardware Accelerators: FFT/iFFT (20 GFLOPS, 5usec per 1K-pt FFT) FIR/IIR and SINC Filters, ASRC Security Crypto Engines with OTPPackaging: 19mm x 19mm BGA (0.8mm pitch) Commercial, Industrial & AutomotivePeripherals: Gigabit Ethernet MAC (RGMII) With IEEE-1588 & AVB support (QoS & clock recovery) USB2.0 HS OTG/Device Controllers (MAC/PHY) 2x CAN2.0 MLB 3/6-pin (Auto devices only) Up to 8x Full SPORT interfaces (w/ TDM & I2S modes) S/PDIF Tx/Rx, 8x ASRC pairs, PCG 2x Dual-SPI and 1x QuadSPI (w/ direct execution) 3x I2C and 3x UARTs (w/ Flow Control) Enhanced Parallel Peripheral Interface For video I/O or parallel converter interface 2x Link Ports (bi-directional, 8-bit, up to 150MB/sec) 3x Enhanced PWM, ADC Control Module (ACM) 8x GP Timer, 1x GP Counter, WDT and RTC Up to 80 GPIO (mux’ed w/ other interfaces) 8-ch 12-bit 1MSPS Housekeeping ADC Thermal Sensor

Dual-core SHARC+ and ARM Cortex-A5 SOC, dual DDR, 2xEthernet, 2xUSB, SDIO, PCIe, 529-cspBGA Features: 500 MHz (3.0 GFLOPS) per core 5Mbits/640KB L1 memory/core with parity Optional cache/SRAM mode 32-bit, 40-bit & 64-bit floating point supportARM Core Infrastructure: 500 MHz ARM Cortex-A5 (with Neon/FPU) 32kByte/32kByte L1 Instr./Data Cache 256kByte L2 CacheShared System Memory 256KB L2 SRAM with ECC protectionUp to Two High Speed Memory Controllers DDR3-900, DDR2-800 & LPDDR (16-bit)Advanced Hardware Accelerators FFT/iFFT (20 GFLOPS, 5usec per 1K-pt FFT) FIR/IIR and SINC Filters, ASRC Security Crypto Engines with OTPPackaging 19mm x 19mm BGA  (0.8mm pitch) Commercial, Industrial & Automotive 2x Ethernet MAC One Gigabit (RGMII) and one 10/100 (RMII) With IEEE-1588 & AVB support (QoS & clock recovery) 2x USB2.0 HS OTG/Device Controllers (MAC/PHY) 2x CAN2.0 SD/SDIO/MMC/eMMC (with SDXC support) PCIe2.0 (1 lane) (SC589 only) Up to 8 Full SPORT interfaces (w/ TDM & I2S modes) S/PDIF Tx/Rx, 8x ASRC pairs, PCG  2x Dual-SPI and 1x QuadSPI (w/ direct  execution) 3x I2C and 3x UARTs (w/ Flow Control) Enhanced Parallel Peripheral Interface For video I/O or parallel converter interface 2x Link Ports (bi-directional, 8-bit, up to 150MB/sec) 3x Enhanced PWM,  ADC Control Module (ACM) 8x GP Timer, 1x GP Counter, WDT and RTC Up to 102 GPIO (mux’ed w/ other interfaces) 8-ch 12-bit 1MSPS Housekeeping ADC Thermal Sensor

Low Cost JFET Input Operational Amplifier Features: TL082/TL084 compatible Low input bias current: 10 pA maximum Offset voltage 5.5 mV maximum (ADTL082A/ADTL084A) 9 mV maximum (ADTL082J/ADTL084J) ±15 V operation Low noise: 16 nV/√Hz Wide bandwidth: 5 MHz Slew rate: 20 V/μs CMRR: 80 dB minimum Total harmonic distortion: 0.001% Supply current: 1.2 mA typical Unity-gain stable

Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU Features: Analog I/O Multichannel, 12-bit, 1 MSPS ADC Up to 16 ADC channels Fully differential and single-ended modes 0 V to VREF analog input range12-bit voltage output DACs Up to 4 DAC outputs available On-chip voltage reference On-chip temperature sensor (±3°C) Voltage comparator Microcontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debug Clocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 44 MHz 41.78 MHz PLL with programmable divider See datasheet for additional features

MicroConverter Multichannel 24-/16-Bit ADCs with Embedded 62 kB Flash and Single-Cycle MCU Features: High resolution Σ-Δ ADCs 2 independent 24-bit ADCs Up to 10 ADC input channels on all devices 24-bit no missing codes 22-bit rms (19.5 bit p-p) effective resolution Offset drift 10 nV/°C, gain drift 0.5 ppm/°C chop enabled Memory 62-kbyte on-chip Flash/EE program memory 4-kbyte on-chip Flash/EE data memory Flash/EE, 100-year retention, 100 kcycle endurance 3 levels of Flash/EE program memory security In-circuit serial download (no external hardware) High speed user download (5 sec) 2304 bytes on-chip data RAM See data sheet for additional features

Ultra Low Power ARM Cortex-M4F MCU with Integrated Power Management Features: EEMBC ULPMark™-CP score (3 V): 189 Ultra low power active and hibernate modes Active mode dynamic current: 41 μA/MHz (typical) Flexi mode: 400 μA (typical) Hibernate mode: 0.65 μA (typical) Shutdown mode: 50 nA (typical) Shutdown mode (fast wake-up): 0.20 μA (typical) ARM Cortex-M4F processor at 52 MHz with FPU, MPU, ITM with SWD interface Power management Single-supply operation (connected to VBAT pins): 1.74 V to 3.6 V Optional buck converter for improved efficiency Memory options 512 kB of embedded flash memory with ECC 4 kB of cache memory to reduce active power 128 kB of configurable system SRAM with parity Safety Watchdog with dedicated on-chip oscillator Hardware CRC with programmable polynomial Multiparity bit protected SRAM ECC protected embedded flash Security Hardware cryptographic accelerator supporting AES-128, AES-256, and SHA-256 Protected key storage in flash, SHA-256-based keyed HMAC and key wrap and unwrap User code protection TRNG Digital peripherals 3 SPI interfaces to enable glueless interface to sensors, radios, and converters 1 I2C and 2 UART peripheral interfaces SPORT for natively interfacing with converters and radios Programmable GPIOs (44 in LFCSP and 51 in WLCSP) 3 general-purpose timers with PWM support RGB timer for driving RGB LED RTC0 for time keeping RTC1 with SensorStrobe and time stamping Programmable beeper 27-channel DMA controller Clocking features 26 MHz clock: on-chip oscillator, external crystal oscillator, SYS_CLKIN for external clock, and integrated PLL 32 kHz clock: on-chip oscillator and low power crystal oscillator Clock fail detection for external crystals Analog peripherals 12-bit SAR ADC, 1.8 MSPS, 8 channels, and digital comparator