16-Bit, 100 kSPS PulSAR Unipolar ADC with Ref Features: 2.5 V Internal Reference:  Typical Drift 3 ppm/°C - Guaranteed Max Drift: 15 ppm/°C Throughput: 100 kSPS INL: ±2.5 LSB Max (±0.0038% of Full Scale) 16 Bits Resolution with No Missing Codes S/(N+D): 88 dB max @ 20 kHz; THD: -96 dB max @ 20 kHz Analog Input Voltage Range: 0 V to 2.5 V No Pipeline Delay Parallel and Serial 5 V/3 V Interface SPI®/QSPI™/MICROWIRE™/DSP Compatible Single 5 V Supply Operation Package: 48-Lead Quad Flat Pack (LQFP) 48-Lead Chip Scale Package (LFCSP) Pin-to-Pin Compatible with  PulSAR® ADCs See datasheet for additional features

20-Bit A/D Converter Features: Monolithic 16-Bit ADC 0.0015% Linearity Error On-Chip Self-Calibration Circuitry Programmable Low-Pass Filter 0.1 Hz to 10 Hz Corner Frequency 0 V to +2.5 V or 2.5 V Analog Input Range 4 kSPS Output Data Rate Flexible Serial Interface Ultralow Power

CMOS, 24-Bit Sigma-Delta, Signal Conditioning ADC with Matched RTD Excitation Currents Features: Charge-Balancing ADC 24 Bits, No Missing Codes ±0.0015% Nonlinearity 2-Channel Programmable Gain Front End Gains from 1 to 128 1 Differential Input 1 Single-Ended Input Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients RTD Excitation Current Sources Bidirectional Microcontroller Serial Interface Internal/External Reference Option Single- or Dual-Supply Operation Low Power (25 mW typ) with Power-Down Mode (7 mW typ)

5V, 12-Bit, Serial 220 kSPS ADC in a 8-Lead Package Features: Fast 12-Bit ADC with 220 kSPS Throughput Rate 8-Lead SOIC Single 5 V Supply Operation High Speed, Flexible, Serial Interface that Allows Interfacing to 3 V Processors On-Chip Track/Hold Amplifier Selection of Input Ranges: ±10 V for AD7898-10 ±2.5 V for AD7898-3 High Input Impedance Low Power: 22.5 mW Max

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

High Current Output, Triple Video Amplifier Features: Drives 13 V Output Drives Unlimited Capacitive Load High Current Output Drive: 70 mA Excellent Video Specifications (RL = 150 Ω) Gain Flatness 0.1 dB to 10 MHz 0.06% Differential Gain Error 0.02° Differential Phase Error Power Operates on ±2.5 V to ±7.5 V Supply 10.0 mA/Amplifier Max Power Supply Current High Speed 250 MHz Unity Gain Bandwidth (3 dB) 1200 V/µs Slew Rate Fast Settling Time of 35 ns (0.1%) High Speed Disable Function Turn-Off Time 30 ns Easy to Use 200 mA Short Circuit Current Output Swing to 1 V of Rails

155 MHz Frequency Synthesizer Features: Frequency Synthesis to 155.52 MHz 19.44 MHz or 9.72 MHz Input Reference Signal Select Mux Single Supply Operation: +5 V or –5.2 V Output Jitter: 2.0 Degrees RMS Low Power: 90 mW 10 KH ECL/PECL Compatible Output 10 KH ECL/PECL/TTL/CMOS Compatible Input Package: 16-Pin Narrow 150 Mil SOIC

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

High Speed, 4-Channel, 8-Bit CMOS ADC Features: 4 or 8 Analog Input Channels Built-In Track-and-Hold Function 10 kHz Signal Handling on Each Channel Fast Microprocessor Interface Single 5 V Supply Low Power: 50 mW Fast Conversion Rate: 2.5 µs/Channel Tight Error Specification: 1/2 LSB