3.3 V 4.25 Gb/s Limiting Amplifier Features: Input sensitivity: 3.5 mV p-p  70 ps rise/fall times  CML outputs: 750 mV p-p differential  Bandwidth selectable for multirate 1×/2×/4× FC modules  Optional LOS output inversion  Programmable LOS detector: 3.5 mV to 35 mV  Rx signal strength indicator (RSSI)  SFF-8472-compliant average power measurement  Single-supply operation: 3.3 V  Low power dissipation: 160 mW  Available in space-saving, 3 mm × 3 mm, 16-lead LFCSP  Extended temperature range: −40°C to +95°C  SFP reference design available

3 V, LVDS, Quad CMOS Differential Line Receiver Features: ±8 kV ESD IEC 61000-4-2 contact discharge on receiver input pins 400 Mbps (200 MHz) switching rates 100 ps channel-to-channel skew (typical) 3.3 ns propagation delay (maximum) 3.3 V power supply High impedance outputs on power-down Please see data sheet for additional features.

Digital Controller for Isolated Power Supply Applications Features: Integrates all typical PWM controller functions 7 PWM control signals Digital control loop Integrated programmable loop filters Programmable voltage line feedforward Dedicated soft start filter Remote and local voltage sense Primary and secondary side current sense Synchronous rectifier control Current sharing OrFET control I2C interface Extensive fault detection and protection Extensive programming and telemetry Fast digital calibration User accessible EEPROM Qualified for automotive applications Download ADP1046AW Automotive Data Sheet (pdf)

26 GHz, Divide-By-4 SMT with Reset & Programmable Output Voltage Features: Differential & Singe-Ended Operation Low Power Consumption: 281 mW typ. Programmable Differential Output Voltage Swing: 800 - 1800 mVP-P Fast Rise and Fall Times: 19 ps Propagation Delay: 121 ps Single Supply: -3.3V 16 Lead 3×3mm SMT Package: 9mm2

Digital to Analog Converters - DAC ual 10Bit D/A, in MSOP, I2C Interface

2.5 V to 5.5 V, 250 A, 2-Wire Interface, Dual Voltage Output, 10-Bit DACs Features: AD5337: 2 buffered 8-bit DACs in 8-lead MSOP AD5338, AD5338-1: 2 buffered 10-bit DACs in 8-lead MSOP AD5339: 2 buffered 12-bit DACs in 8-lead MSOP Low power operation: 250 μA @ 3 V, 300 μA @ 5 V 2-wire (I2C-compatible) serial interface 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 80 nA @ 3 V, 200 nA @ 5 V 3 power-down modes Double-buffered input logic Output range: 0 V to VREF Power-on reset to 0 V

Power Switch ICs - Power Distribution 6V, 1A Pwr SW w\RCB 30us

Digital to Analog Converters - DAC Single 3V 12bit SPI DAC with reference

1:2 Single-Ended, Low Cost Active RF Splitter Features:Ideal for CATV applications Excellent frequency response 1.7 GHz, -3 dB bandwidth1 dB flatness to 1.2 GHzLow noise figure: 4.4 dB Low distortion Composite second order (CSO): -62 dBcComposite triple beat (CTB): -72 dBc1 dB compression point of 8.5 dBm3 dB of gain per output channel 24 dB of isolation between output channels 75 input and outputs Small package size 12-lead 3 mm 3 mm lead frame chip scale package

Low Power HDMI/DVI Transmitter with Consumer Electronic Control (CEC) Features: Low power HDMI/DVI transmitter ideal for portable applications CEC controller and expanded message buffer (3 messages) reduces system overhead Incorporates HDMI v.1.3 (x.v.Color™) technology Compatible with DVI v.1.0 Optional embedded HDCP keys to support HDCP 1.3 1.8 V and 1.2V supplies for ultralow operating power Video/audio inputs accept logic levels from 1.8 V to 3.3 V 80 MHz operation supports all video and graphics resolutions from 480i to 1080i Programmable two-way color space converter Supports RGB, YCbCr, DDR Supports ITU656-based embedded syncs Automatic input video format timing detection (CEA-861E) See data sheet for additional features