Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output Features: Reliable Low Cost Voltage Monitor with Reset Output Suitable for Monitoring 2.5 V, 3 V, 3.3 V, and 5 V Power Supply Voltages Reset Threshold Levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V (Typ)Initialize Microprocessor Systems with Added Safety Open-Drain Output Choices (ADM1811, ADM1813, ADM1816, and ADM1818) Can Be Used with a Manual Push-Button to Generate a Reset (ADM1813, ADM1818) Available in 3-Lead SOT-23 and SC70 Packages Active High and Low Push-Pull Output Choices (ADM1810, ADM1812, ADM1815, and ADM1817)

High Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receiver Features: 120 kB transmission rate Small (0.1 µF) charge pump capacitors Single 5 V power supply Meets TIA/EIA-232-E and V.28 specifications 2 drivers and 2 receivers On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power BiCMOS: 2.5 mA ICC ±30 V receiver input levels

Equalisers Front Panel HDMI Buffer - TMDS Only

Operational Amplifiers - Op Amps VLTG-FDBK, G= 2 CLAMP AMP

Charge Pump, 7-Channel Smart LED Driver with I2C Interface Features: Charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency 7 independent, programmable LED drivers 7 drivers capable of 30 mA (typical) 1 driver also capable of 60 mA (typical) Programmable maximum current limit (128 levels) Standby mode for <1 μA current consumption 16 programmable fade in and fade out time 0.1 sec to 5.5 sec Choose from linear, square, or cubic rates Fading override I2C-compatible interface for all programming Dedicated reset pin and built-in power-on reset (POR) Short-circuit, overvoltage, and overtemperature protection Internal soft start to limit inrush currents Input-to-output isolation during faults or shutdown Operation down to VIN = 2.5 V with undervoltage lockout (UVLO) at VIN = 2.0 V Available in a small 20-ball, 2.15 mm × 2.36 mm × 0.6 mm WLCSP or a 20-lead, 4 mm × 4 mm × 0.75 mm LFCSP

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

ADM483E - +/-15KV ESD Protected, EMC Compliant Slew Rate Limited

Microprocessor Supervisor with Backup Battery Switchover, Adjustable Reset and Watchdog Periods, Chip Enable Signals, 4.65V Threshold Voltage, Watchdog, Battery Backup and Low VCC Status O/Ps and 250mA Output Current Features: Low Power Consumption: Precision Voltage Monitor ±2% Tolerance on ADM800L/M Reset Time Delay—200 ms, or Adjustable 1 µA Standby Current Automatic Battery Backup Power Switching Fast Onboard Gating of Chip Enable Signals Also Available in TSSOP Package (ADM691A)

Microprocessor Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 250mA Output Current Features: Low Power Consumption Precision Voltage Monitor ±2% Tolerance on ADM800L/M Reset Time Delay—200 ms, or Adjustable 1 µA Standby Current Automatic Battery Backup Power Switching Fast Onboard Gating of Chip Enable Signals Also Available in TSSOP Package (ADM691A)

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool