8-Bit, 1 GSPS, JESD204B, Quad Analog-to-Digital Converter Features:JESD204B (Subclass 1 and Subclass 0) coded serial digital outputs Lane rates up to 15 Gbps 1.6 W total power at 1 GSPS 400 mW per ADC channel SFDR: 71 dBFS at 611 MHz (1.44 V p-p input range) SNR: 48.6 dBFS at 611 MHz (1.44 V p-p input range) SINAD: 48.5 dBFS at 611 MHz (1.44 V p-p input range) 0.9 V, 1.8 V, and 2.5 V dc supply operation No missing codes Internal ADC voltage reference Analog input buffer On-chip dithering to improve small signal linearityFlexible differential input range 1.44 V p-p to 2.16 V p-p (1.44 V p-p default) 1.4 GHz analog input full power bandwidth Fast detect bits for efficient AGC implementation Differential clock input Integer clock divide by 1, 2, 4, or 8 On-chip temperature diode Flexible JESD204B lane configurations

Ultralow EMI 28VIN, 6A DC/DC Module Regulator Features: Complete Low EMI Switch Mode Power Supply Wide Input Voltage Range: 4.5V to 28V 6A DC Typical, 8A Peak Output Current 0.6V to 5V Output Voltage Range EN55022 Class B Certified Output Voltage Tracking and Margining PLL Frequency Synchronization ±1.75% Total DC Error Power Good Output Current Foldback Protection (Disabled at Start-Up) Parallel/Current Sharing Current Mode Control Up to 93% Efficiency at 5VIN, 3.3VOUT Programmable Soft-Start Output Overvoltage Protection –55°C to 125°C Operating Temperature Range (LTM4606MP) SnPb or RoHS Compliant Finish 15mm × 15mm × 2.82mm LGA Package 15mm × 15mm × 3.42mm BGA Package

Secondary-Side Synchronous Forward Controller Features: Secondary-Side Control for Fast Transient Response Self-Starting Architecture Eliminates Need for Separate Bias Regulator Proprietary Gate Drive Encoding Scheme Reduces System Complexity Current Mode Control Ensures Current Sharing PLL Fixed Frequency: 100kHz to 500kHz ±1% Output Voltage Accuracy OPTI-LOOP Compensation Available in a Narrow 16-Lead SSOP Package

Single Switch Synchronous Forward Controller Features: Synchronous Rectifier Control for High Efficiency Programmable Volt-Second Clamp Output Power Levels from 25W to 500W Low Current Start-Up (LT1952: 460µA; VIN On/Off = 14.25V/8.75V) (LT1952-1: 400µA; VIN On/Off = 7.75V/6.5V) True PWM Soft-Start Low Stress Short Circuit Protection Precision 107mV Current Limit Threshold Adjustable Delay for Synchronous Timing Accurate Shutdown Threshold with Programmable Hysteresis Programmable Slope Compensation Programmable Leading Edge Blanking Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock up to 1.5 • fOSC Internal 1.23V Reference 2.5V External Reference Current Mode Control Small 16-Pin SSOP Package

37V/1.2A Step-Down Regulator in 3mm 3mm DFN Features: Wide Input Range: Operation from 3.6V to 37V Overvoltage Lockout Protects Circuit Through 55V Transients Low Minimum On-Time: Converts 16VIN to 3.3VOUT at 2MHz 1.2A Output Current Adjustable Frequency: 300kHz to 2.5MHz Constant Switching Frequency at Light Loads Tracking and Soft-Start Precision UVLO Short-Circuit Robust IQ in Shutdown <1μA Internally Compensated 10-Lead 3mm × 3mm DFN Package

12 Channel Multicell Battery Monitor with Daisy Chain Interface, Generation 1 Features: Qualified for Automotive Applications Measures Up to 12 Li-Ion Cells in Series (60V Max) Stackable Architecture Enables >1000V Systems 0.25% Maximum Total Measurement Error 13ms to Measure All Cells in a System Cell Balancing: On-Chip Passive Cell Balancing Switches Provision for Off-Chip Passive Balancing Two Thermistor Inputs Plus On-Board Temperature Sensor 1MHz Daisy-Chainable Serial Interface High EMI Immunity Delta Sigma Converter with Built-In Noise Filter Open Wire Connection Fault Detection Low Power Modes 44-Lead SSOP Package

Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/C Reference Features: Integrated Precision Reference 2.5V Full-Scale 10ppm/°C (LTC2631-L) 4.096V Full-Scale 10ppm/°C (LTC2631-H) Maximum INL Error: 1LSB (LTC2631A-12) Bidirectional Reference: Input or 10ppm/°C Output 400kHz I2C Interface Nine Selectable Addresses (LTC2631-Z) Low Noise (0.7mVP-P , 0.1Hz to 200kHz) Guaranteed Monotonic Over Temperature 2.7V to 5.5V Supply Range (LTC2631-L) Low Power Operation: 180μA at 3V Power Down to 1.8μA Maximum (C and I Grades) Power-On Reset to Zero or Mid-Scale Options Double-Buffered Data Latches Guaranteed Operation From –40°C to 125°C (H-Grade) 8-Lead TSOT-23 (ThinSOT™) Package

Ultrafast Transient Response, Low Dropout Regulators Adjustable and Fixed Features: UltraFast™ Transient Response Eliminates Tantalum and Electrolytic Output Capacitors FET RDS(ON) Defines Dropout Voltage 1% Reference/Output Voltage Tolerance Temperature Typical Load Regulation: 1mV High Side Sense Current Limit Multifunction Shutdown Pin with Latch off

14-Bit, 80Msps Ultra-Low Power 1.8V ADCs Features: 73.4dB SNR 85dB SFDR Low Power: 127mW/106mW/89mW Single 1.8V Supply CMOS, DDR CMOS or DDR LVDS Outputs Selectable Input Ranges: 1VP-P to 2VP-P 800MHz Full-Power Bandwidth S/H Optional Data Output Randomizer Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Serial SPI Port for Configuration Pin Compatible 14-Bit and 12-Bit Versions 40-Pin (6mm × 6mm) QFN Package

12-Bit, 105Msps Ultralow Power 1.8V ADCs Features: 70.8dB SNR 85dB SFDR Low Power: 124mW/103mW/87mW Single 1.8V Supply CMOS, DDR CMOS or DDR LVDS Outputs Selectable Input Ranges: 1VP-P to 2VP-P 800MHz Full-Power Bandwidth S/H Optional Data Output Randomizer Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Serial SPI Port for Configuration Pin Compatible 14-Bit and 12-Bit Versions 40-Pin (6mm × 6mm) QFN Package