Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs, Open Wire Detection Features: Tested for robustness per: IEC6100-4-2, IEC6100-4-3, IEC6100-4-4, IEC6100-4-5, IEC6100-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C Open wire detection 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Internal or external clock Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

Fully Accurate 12-Bit VOUT nanoDAC SPI Interface 4.5 V to 5.5 V in a TSSOP Features: Low power dual 12-/14-/16-bit DAC, ±1 LSB INL Individual voltage reference pins Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale Power down to 400 nA at 5 V 3 power-down functions Per channel power-down Low glitch upon power-up Hardware power-down lockout capability Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-lead TSSOP

256 Position SPI/I2C Selectable Digital Potentiometer Features: 256-position End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Compact MSOP-10 (3 mm × 4.9 mm) package Pin selectable SPI/I2C compatible interface Extra package address decode pin AD0 Full read/write of wiper register Power-on preset to midscale Single supply 2.7 V to 5.5 V Low temperature coefficient 45 ppm/°C Low power, IDD = 8 μA Wide operating temperature −40°C to +125°C SDO output allows multiple device daisy-chaining Evaluation board available

Nonvolatile, Quad, 64-Position Digital Potentiometer Features: Nonvolatile Memory Preset Maintains Wiper Settings 4-channel independent programmable 64-position resolution EEMEM restore time: 140 μs typical Full monotonic operation 10 kΩ, 50 kΩ, and 100 kΩ terminal resistance See Data Sheet for Additional Information

HBT Vector Modulator SMT, 700 - 1000 MHz Features: Continuous Phase Control: 360° Continuous Gain Control: 40 dB Low Output Noise Floor: -162 dBm/Hz High Input IP3: +34 dBm 16 Lead 3×3mm SMT Package: 9mm2

40W SPDT Failsafe Switch SMT, 0.1 - 2.1 GHz Features: High Input P0.1dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/ +3V to 0/ +8V Failsafe Operation; Tx 'On' when Unpowered 2 × 2mm DFN SMT Package

40W SPDT Failsafe Switch SMT, 0.1 - 2.1 GHz Features: High Input P0.1dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/ +3V to 0/ +8V Failsafe Operation; Tx 'On' when Unpowered 2 × 2mm DFN SMT Package

Phase-Locked Oscillator SMT, 14.7 - 15.4 GHz Features: Pout: +9 dBm Phase Noise: -110 dBc/Hz @100 KHz Typ. Single Supply: +5V @ 340 mA, 12V @ 28 mA QFN Leadless SMT Package, 16 mm2

3000 V/S, 35mW Current Feedback Quad Amplifier Features: High speed 250 MHz -3 dB bandwidth (G = +1) 3000 V/µs slew rate 21 ns settling time to 0.1% 1.8 ns rise time for 2 V step Low power 3.5 mA/amp power supply Current (35 mW/amp) Single supply operation Fully specified for +5 V supply High output current of 50 mA Good video specifications (RL = 150 Ω, G = +2) Gain flatness 0.1 dB to 30 MHz 0.04% differential gain error 0.10° differential phase error Low distortion –78 dBc THD at 5 MHz –61 dBc THD at 20 MHz Available in a 14-lead SOIC