Low Cost, 300 MHz Rail-to-Rail Amplifier (Single with Disable) Features: Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) Low offset voltage: 6 mV High speed 300 MHz, −3 dB bandwidth (G = 1) 650 V/μs slew rate 8.5 nV/√Hz at 5 V 35 ns settling time to 0.1% with 1 V step Operates on 2.7 V to 8 V supplies Input voltage range = −0.2 V to +3.2 V with Vs = 5 V Excellent video specifications (RL = 150 Ω, G = 2) Gain flatness: 0.1 dB to 30 MHz 0.01% differential gain error 0.04° differential phase error 35 ns overload recovery Low power 6.8 mA/amplifier typical supply current 400 μA when disabled

Software Selectable, True Bipolar Input, 8-Channel, 12-Bit Plus Sign A/D Converter Features: 12-Bit plus Sign SAR ADC True Bipolar Input Ranges Software Selectable Input Ranges: ± 10V, ± 5V, ± 2.5V, 0 to 10V Eight Analog Input Channels with Channel Sequencer Single Ended, True Differential and Pseudo Differential Analog Input Capability High Analog Input Impedance Low Power: 26 mW Full Power Signal Bandwidth: >13 MHz Internal 2.5 V Reference High Speed Serial Interface - 1 MSPS Throughput For four and two channel equivalent devices, see AD7324, AD7322

Single-Phase Multifunction Metering IC with di/dt Sensor Interface

5 kV Signal Isolated, ESD Protected, 500 kbps, Full/Half Duplex RS-485 Transceiver Features: Isolated, RS-485/RS-422 transceiver, configurable as half- or full-duplex ±15 kV ESD protection on RS-485 input/output pins 500 kbps data rate Complies with ANSI TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E) Suitable for 5 V or 3.3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs True fail-safe receiver inputs 256 nodes on the bus Thermal shutdown protection Safety and regulatory approvals UL recognition 5000 V rms isolation voltage for 1 minute per UL1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 Reinforced insulation, VIORM = 849 VPEAK CSA Component Acceptance Notice 5A IEC 60950-1: 380 V rms (reinforced) Operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package

True Accuracy, 16-Bit 12 V/15 V, Serial Input Voltage Output D/A Converter Features: Full 16-bit performance 1 LSB max INL and DNL Output voltage range up to ±14 V On-board reference buffers, eliminating the need for a negative reference Temperature ranges of −40°C to +85°C for A/B version/−40°C to +125°C for W/Y version Controlled output during power-on Settling time of 10 µs to 0.003% Clear function to 0 V Asynchronous update of outputs (LDAC pin) Power-on reset Serial data output for daisy chaining Data readback facility

Dual 14-Bit, 20/40/65 MSPS, 3 V Analog-to-Digital Converter Features: Integrated Dual 14-Bit Analog-to-Digital Converters Single 3 V Supply Operation (2.7 V to 3.6 V) SNR = 71.6 dBc (to Nyquist, AD9248-65) SFDR = 80 dBc (to Nyquist, AD9248-65) Low Power: 300 mW at 65 MSPS Differential Input with 500 MHz 3 dB Bandwidth Exceptional Cross Talk Immunity > 85 dB On-Chip Reference and SHA Flexible Analog Input: 1 Vp-p to 2 Vp-p Range Offset Binary or Twos Complement Data Format Clock Duty Cycle Stabilizer Output datamux option

36 V, 19 MHz, Low Noise, Low Bias Current, JFET Op Amp Features: Low offset voltage: 200 μV maximum Offset drift: 1 μV/°C typical Very low input bias current: 5 pA maximum Extended temperature range: −40ºC to +125ºC ±5 V to ±15 V dual supply ADA4627-1 GBW: 19 MHz ADA4637-1 GBW: 79 MHz See data sheet for additional information

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Amplifiers - OP AMP (OP AMP); No. of Amplifiers:1 Amplifier; Bandwidth:800kHz; Slew Rate:375V/ s; Supply Voltage Range:-; Amplifier Case Style:-; No. of Pins:16Pins; Operating Temperature Min:-; Operating Temperature Max:-; MSL:- ;RoHS Compliant: No

Precision 2.5 V, 5.0 V, and 10.0 V Voltage References