4 ADC with PLL, 192 kHz, 24-Bit ADC

Quad, 235 MHz, DC-Coupled VGA and Differential Output Amplifier Features: Low noise Voltage noise: 2.3 nV/√Hz Current noise: 2 pA/√Hz Wide bandwidth Small signal: 235 MHz (VGAx); 80 MHz (output amplifier) Large signal: 80 MHz (1 V p-p) Gain range 0 to 24 dB (input to VGA output) 6 to 30 dB (input to differential output) Gain scaling: 20 dB/V DC-coupled Single-ended input and differential output Supplies: ±2.5 V to ±5 V Low power: 140 mW per channel at ±3.3 V

Compact, 800 mA, 3 MHz, Step-Down DC-to-DC Converter with an Internal Discharge Switch Features: Input voltage: 2.3 V to 5.5 V Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 24 μA Very small solution size 6-lead, 1 mm × 1.5 mm WLCSP package Fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier, compensation, and soft start Current overload and thermal shutdown protections Ultralow shutdown current: 0.2 μA (typical) Forced PWM and automatic PWM/PSM modes Supported by ADIsimPower™ design tool

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation:  0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Rail-to-Rail Output, Precision Dual JFET Op Amp Features: Low Supply Current: 250 µA max Very Low Input Bias Current: 1 pA max Low Offset Voltage: 750 µV max Single-supply Operation: 5 V to 26 V Dual-supply Operation: ±2.5 V to ±13 V Rail-to-rail Output Unity Gain Stable No Phase Reversal

Low Power, Rail-to-Rail Output, Precision JFET Quad Amplifier Features: Low Supply Current/Amp: 250 µA max Very Low Input Bias Current: 1 pA max Low Offset Voltage: 750 µV max Single-supply Operation: 5 V to 26 V Dual-supply Operation: ±2.5 V to ±13 V Rail-to-rail Output Unity Gain Stable 3mm x 3mm LFCSP and SOICAD8643-EP supports defense and aerospace applications (AQEC standard) Download AD8643-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/12653 DSCC Drawing Number

COMPARATOR SINGLE 3.5NS SC-70; Comparator Type:High Speed; No. of Comparators:1; Response Time:3.5ns; Supply Voltage Range:2.5V to 5.5V; Comparator Case Style:SC-70; No. of Pins:6Pins; IC Output Type:CMOS TTL; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:ADCMP601 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016)

Single, 12-/14-/16-Bit nanoDAC with 5 ppm/°C On-Chip Reference in SOT-23

Single, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference Features: Low power, single nanoDAC AD5660: 16 bits 12-Bit Accuracy Guaranteed On-chip, 1.25 V/2.5 V, 5 ppm/°C reference Tiny 8-lead SOT-23/MSOP packages Power-down to 480 nA @ 5 V, 200 nA @ 3 V 3 V/5 V single power supply Guaranteed 16-bit monotonic by design Power-on reset to zero/midscale 3 power-down functions Serial interface with Schmitt-triggered inputs Rail-to-rail operation SYNC interrupt facility